Hi Lupo,
apt-get -f install hat mich hängen lassen, so lange bis ich den fehler mit Cups behoben hatte. War was in der config mit Localhost.
Mir ist die bedienung hier auch nicht mehr geläufig, auf das ich das Forum auch sicher bedinen könnte.
journalctl -b -p err. gibt zurück:
Logs begin at Mi 2014-07-23 13:47:17 CEST, end at Mi 2014-07-23 18:15:18 CEST. --
Jul 23 13:47:17 siductionbox kernel: ata6.00: revalidation failed (errno=-5)
Jul 23 13:47:17 siductionbox kernel: ata6.00: revalidation failed (errno=-5)
Jul 23 13:47:17 siductionbox kernel: ata6.00: revalidation failed (errno=-5)
Jul 23 13:47:17 siductionbox kernel: ata6: exception Emask 0x50 SAct 0x0 SErr 0x280900 action 0x6 frozen t4
Jul 23 13:47:17 siductionbox kernel: ata6: irq_stat 0x08000002, interface fatal error
Jul 23 13:47:17 siductionbox kernel: ata6: SError: { UnrecovData HostInt 10B8B BadCRC }
Jul 23 13:47:19 siductionbox systemd-udevd[287]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00$
Jul 23 13:47:19 siductionbox systemd-udevd[289]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00$
Jul 23 13:47:19 siductionbox systemd-udevd[290]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00$
Jul 23 13:47:26 siductionbox ntpdate[642]: Can't find host 0.debian.pool.ntp.org: Name or service not known (-2)
Jul 23 13:47:26 siductionbox ntpdate[642]: Can't find host 1.debian.pool.ntp.org: Name or service not known (-2)
Jul 23 13:47:26 siductionbox ntpdate[642]: Can't find host 2.debian.pool.ntp.org: Name or service not known (-2)
Jul 23 13:47:26 siductionbox ntpdate[642]: Can't find host 3.debian.pool.ntp.org: Name or service not known (-2)
Jul 23 13:47:26 siductionbox ntpdate[642]: no servers can be used, exiting
Jul 23 13:47:30 siductionbox systemd[1]: Failed to start /etc/rc.local Compatibility.
Jul 23 13:47:33 siductionbox colord-sane[1314]: io/hpmud/musb.c 2075: Invalid usb_open: Permission denied
Jul 23 13:47:33 siductionbox colord-sane[1314]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 13:47:33 siductionbox colord-sane[1314]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 13:47:34 siductionbox hp[1395]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 13:47:34 siductionbox hp[1395]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 13:47:34 siductionbox hpfax[1390]: [1390]: error: Failed to create /var/spool/cups/tmp/.hplip
Jul 23 13:47:35 siductionbox hpfax[1390]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 13:47:35 siductionbox hpfax[1390]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 23 14:20:58 siductionbox hp[5431]: io/hpmud/musb.c 1446: unable to write data hp:/usb/Officejet_Pro_L7600?serial=MY87B8$
Jul 23 14:20:58 siductionbox hp[5431]: prnt/backend/hp.c 615: ERROR: 1009 media-empty-error; will retry in 30 seconds...
Jul 23 14:21:28 siductionbox hp[5431]: prnt/backend/hp.c 615: ERROR: 1009 media-empty-error; will retry in 30 seconds...
Jul 23 16:06:48 siductionbox motion[6485]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:30:37 siductionbox motion[6590]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:49:59 siductionbox motion[6642]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:50:52 siductionbox motion[6649]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:52:20 siductionbox motion[6656]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:52:50 siductionbox motion[6659]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Jul 23 16:54:16 siductionbox motion[6662]: [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sdl_threadnr"
Was hier das mit dem SATA6 (das wäre mein CD-Rom, ist nicht angeschlossen) u suchen hat, verstehe ich auch nicht. Ich weiß aber so ungefähr was gemeint sein kann.
Ksystemlog und wohl KdeSu funktionieren nicht, Das Porgramm kommt nach dem Passwort, stirbt aber sofort wenn ich ein Eikon oder was anderes anklicke. Der Crash-Handler kommt dann hoch und kann mich auch nichts weiter berichten, ausgenommen das da was mit ........... nicht stimmt. Klar, das Der eben nicht auf SystemD wartet sondern auch was ganz anderes.
Du und Ihr wisst viel mehr als ich, und ich kann mir hier nicht mehr selber helfen.
Ahoi von hier aus und Danke
Wieso muss ich hier nun diesen BuschstabenSAlat und noch das LEBEN eingeben?? Bin doch angemeldet.
Ob ich das mit dem Code-Tags noch mal lernen werde??