also: der Installer bzw. das ISO _ist_ kaputt.
Ich hab 4 Varianten getestet:
- jeweils mit dem Linux-USB-Stick Tool und dann mit dd
- jeweils mit dem ISO von der Homepage und dem aktuellen ISO von
https://isobuilds.siduction.org/Im neuen ISO ergab sich:
- Der Link auf dem Desktop führte zur Eieruhr, aber diese endete nach einiger Zeit und der Installer startete nicht.
- Der Link zum Installer im Menü funktioniert
In _allen_ Fällen hängte sich der Installer bei 36% auf, während die Festplattenkontrollleuchte ununterbrochen leuchtete. Dies bei der beabsichtigten Vorgehensweise, gemäß dem 4. Punkt der Auswahl die 4 Partitionen wie oben angezeigt zuzuordnen.
Mit dem neuen ISO habe ich dann die Version 2 getestet: Partition überschreiben. Das führt zu einem startbaren System innerhalb sehr kurzer Zeit, aber die home-Partition ist (natürlich(?)) nicht eingebunden, muß händisch in der fstab erfolgen.
so: the installer or the ISO _is_ broken.
I tested 4 variants:
- each with the Linux-USB-Stick Tool and then with dd
- each with the ISO from the homepage and the current ISO from
https://isobuilds.siduction.org/In the new ISO it emerged:
- The link on the desktop led to the egg timer, but it ended after some time and the installer did not start.
- The link to the installer in the menu works
In _all_ cases, the installer hung up at 36% while the hard disk indicator light was lit continuously. This was the case with the intended procedure of assigning the 4 partitions as shown above according to the 4th point of the selection.
I then tested version 2 with the new ISO: overwrite partition. This leads to a bootable system within a very short time, but the home partition is (of course(?)) not mounted, must be done manually in the fstab.
Translated with
www.DeepL.com/Translator