[EN] solved:fresh-install: radeon (not fglrx) message: firmware ?

[rueX]

dmesg |grep -i firmware
[    3.268215] radeon_cp: Failed to load firmware "radeon/RS690_cp.bin"
[    3.268264] [drm:r100_cp_init] *ERROR* Failed to load firmware!




dmesg | grep "radeon"
[    3.120159] [drm] radeon kernel modesetting enabled.
[    3.130854] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[    3.130859] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    3.130924] radeon 0000:01:05.0: irq 42 for MSI/MSI-X
[    3.130938] radeon 0000:01:05.0: radeon: using MSI.
[    3.130972] [drm] radeon: irq initialized.
[    3.139134] [drm] radeon: 128M of VRAM memory ready
[    3.139137] [drm] radeon: 512M of GTT memory ready.
[    3.175308] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    3.196167] radeon 0000:01:05.0: WB enabled
[    3.196173] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xffff880032feb000
[    3.268215] radeon_cp: Failed to load firmware "radeon/RS690_cp.bin"
[    3.268316] radeon 0000:01:05.0: failed initializing CP (-2).
[    3.268357] radeon 0000:01:05.0: Disabling GPU acceleration
[    3.268399] [drm] radeon: cp finalized
[    3.399776] fbcon: radeondrmfb (fb0) is primary device
[    3.428428] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    3.428431] radeon 0000:01:05.0: registered panic notifier
[    3.428441] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0


Well, fresh install, but "fw-detect" : nothing.


Which command i need ?


HELP please !

[rueX]

INFO:

inxi -v3
System:    Host: siductionbox Kernel: 3.9-2.towo-siduction-amd64 x86_64 (64 bit, gcc: 4.7.3)
           Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1.1 Desperado Reloaded - kde - (201206241901)
Machine:   Mobo: MICRO-STAR model: MS-7327 version: 1.0 Bios: American Megatrends version: V1.6 date: 02/28/2008
CPU:       Dual core AMD Athlon 64 X2 3600+ (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 svm) bmips: 3990.02
           Clock Speeds: 1: 1000.00 MHz 2: 1000.00 MHz
Graphics:  Card: Advanced Micro Devices [AMD] nee ATI RS690 [Radeon X1200 Series] bus-ID: 01:05.0
           X.org: 1.12.4 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 120x37 Advanced Data: N/A for root
Network:   Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
           driver: r8169 ver: 2.3LK-NAPI port: d800 bus-ID: 02:00.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:19:db:88:73:2c
Drives:    HDD Total Size: 64.0GB (6.1% used) 1: model: OCZ
Info:      Processes: 136 Uptime: 32 min Memory: 640.2/874.6MB Runlevel: 5 Gcc sys: 4.7.3
           Client: Shell (bash 4.2.45) inxi: 1.8.45

[towo]

apt-get install firmware-linux-nonfree

[rueX]

was installed:

apt-cache policy firmware-linux-nonfree
firmware-linux-nonfree:
  Installiert:           0.38
  Installationskandidat: 0.38
  Versionstabelle:
 *** 0.38 0
        500 http://ftp.de.debian.org/debian/ unstable/non-free amd64 Packages
        100 /var/lib/dpkg/status

but nothing happened...

[towo]

Code: [Select]

root:Defiant> apt-file find RS690_cp.bin
firmware-linux-nonfree: /lib/firmware/radeon/RS690_cp.bin

cat /proc/cmdline

apt-get --reinstall install firmware-linux-nonfree && ls -al /lib/firmware/radeon | grep RS

[rueX]

cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.9-2.towo-siduction-amd64 root=UUID=85ed9818-62b6-4588-93fa-1ee9dff1502f ro quiet 3


apt-get --reinstall install firmware-linux-nonfree && ls -al /lib/firmware/radeon | grep RS
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.      
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 1 erneut installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen noch 0 B von 978 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
dpkg-preconfigure: kann Stdin nicht wieder öffnen: Datei oder Verzeichnis nicht gefunden
(Lese Datenbank ... 134605 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von firmware-linux-nonfree 0.38 (durch .../firmware-linux-nonfree_0.38_all.deb) ...
Ersatz für firmware-linux-nonfree wird entpackt ...
firmware-linux-nonfree (0.38) wird eingerichtet ...
update-initramfs: deferring update (trigger activated)
Trigger für initramfs-tools werden verarbeitet ...
update-initramfs: Generating /boot/initrd.img-3.9-2.towo-siduction-amd64
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
W: mdadm: no arrays defined in configuration file.
-rw-r--r--  1 root root  2048 Mai  6 07:24 RS600_cp.bin
-rw-r--r--  1 root root  2048 Mai  6 07:24 RS690_cp.bin
-rw-r--r--  1 root root 21504 Mai  6 07:24 RS780_me.bin
-rw-r--r--  1 root root  2304 Mai  6 07:24 RS780_pfp.bin


na dann reboot ich mal ...

[rueX]

dmesg | grep "radeon"
[    3.061810] [drm] radeon kernel modesetting enabled.
[    3.106941] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[    3.106945] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    3.107040] radeon 0000:01:05.0: irq 42 for MSI/MSI-X
[    3.107053] radeon 0000:01:05.0: radeon: using MSI.
[    3.107089] [drm] radeon: irq initialized.
[    3.107861] [drm] radeon: 128M of VRAM memory ready
[    3.107864] [drm] radeon: 512M of GTT memory ready.
[    3.129589] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    3.140984] radeon 0000:01:05.0: WB enabled
[    3.140991] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xffff880033735000
[    3.160489] [drm] radeon: ring at 0x0000000040001000
[    3.298049] fbcon: radeondrmfb (fb0) is primary device
[    3.329997] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    3.330011] radeon 0000:01:05.0: registered panic notifier
[    3.330019] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0
[   17.044626] [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID


hey thanks !

seems to be ok (no dmesg ...)