Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: [gelöst] nvidia module crashed  (Read 3467 times)

kris99

  • Guest
[gelöst] nvidia module crashed
« on: 2011/05/05, 16:33:51 »
Hallo Zusammen,

ich habe ein seltsames Problem: nach dem D-U von heute morgen crashed das nvidia modul beim start in den runlevel 5. Doch zuerst ein paar Infos:
Code: [Select]
# infobash -v3                                                                                                                                                                                
Host/Kernel/OS  "marvin2" running Linux 2.6.38-4.towo.1-frickel-amd64 x86_64 [ aptosid 2011-01 Γῆρας - kde-full - (201102052200) ]                                                                              
CPU Info        8x Intel Core i7-2720QM @ 6144 KB cache flags( sse3 ht nx lm vmx ) clocked at [ 1500.000 MHz ]                                                                                                  
Videocard       nVidia Device 1056  tty resolution ( 209x74 )                                                                                                                                                    
Network cards   Intel 82579LM Gigabit                                                                                                                                                                            
                Intel Centrino Ultimate-N 6300                                                                                                                                                                  
Processes 116 | Uptime 9min | Memory 101.8/3922.8MB | HDD ST9500420AS Size 500GB (6%used) | Runlevel 5 | Client Shell | Infobash v3.36    

dmesg:
[code]

0000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 base 12E000000 mask FFE000000 uncachable
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f1c00] f1c00
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[    0.000000]  0000000000 - 00cf800000 page 2M
[    0.000000] kernel direct mapping tables up to cf800000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000012e000000
[    0.000000]  0100000000 - 012e000000 page 2M
[    0.000000] kernel direct mapping tables up to 12e000000 @ cf5b1000-cf5b7000
[    0.000000] RAMDISK: 37446000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000cf7fde18 0007C (v01 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110112/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110112/tbfadt-486)
[    0.000000] ACPI: DSDT 00000000cf76d018 08953 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[    0.000000] ACPI: FACS 00000000cf7e4e40 00040
[    0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02                 00000000      00000000)
[    0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
[    0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000cf76c018 0094E (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
[    0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
[    0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: SLIC 00000000cf788a18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: SSDT 00000000cf765018 01429 (v01 NvdRef  NvdTabl 00001000 INTL 20090903)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000012e000000
[    0.000000] Initmem setup node 0 0000000000000000-000000012e000000
[    0.000000]   NODE_DATA [000000012dffb000 - 000000012dffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880129e00000-ffff88012d7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0012e000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000cf271
[    0.000000]     0: 0x000cf2b5 -> 0x000cf5b7
[    0.000000]     0: 0x000cf7ff -> 0x000cf800
[    0.000000]     0: 0x00100000 -> 0x0012e000
[    0.000000] On node 0 totalpages: 1037566
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3916 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 830892 pages, LIFO batch:31
[    0.000000]   Normal zone: 2576 pages used for memmap
[    0.000000]   Normal zone: 185840 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cf271000 - 00000000cf2b5000
[    0.000000] PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
[    0.000000] PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
[    0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
[    0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[    0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800cf000000 s79360 r8192 d23040 u131072
[    0.000000] pcpu-alloc: s79360 r8192 d23040 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1020648
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-4.towo.1-frickel-amd64 root=/dev/mapper/sda3_crypt ro cryptopts=source=UUID=fd48e0da-e6bc-42b3-badf-f49faab3b7a1,target=sda3_crypt quiet 3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4003048k/4947968k available (3787k kernel code, 797704k absent, 147216k reserved, 2740k data, 752k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:1192 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2194.970 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.94 BogoMIPS (lpj=2194970)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000022] Security Framework initialized
[    0.000025] SELinux:  Disabled at boot.
[    0.000366] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001401] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001828] Mount-cache hash table entries: 256
[    0.001934] Initializing cgroup subsys devices
[    0.001936] Initializing cgroup subsys freezer
[    0.001937] Initializing cgroup subsys net_cls
[    0.001939] Initializing cgroup subsys blkio
[    0.001980] CPU: Physical Processor ID: 0
[    0.001981] CPU: Processor Core ID: 0
[    0.001986] mce: CPU supports 9 MCE banks
[    0.002000] CPU0: Thermal monitoring enabled (TM1)
[    0.002009] using mwait in idle threads.
[    0.003054] ACPI: Core revision 20110112
[    0.008937] DMAR: Host address width 36
[    0.008939] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.008957] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.008959] DMAR: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
[    0.008960] DMAR: No ATSR found
[    0.009061] Not enabling x2apic, Intr-remapping init failed.
[    0.009062] Setting APIC routing to physical flat
[    0.009412] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019404] CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07
[    0.120826] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.120832] ... version:                3
[    0.120833] ... bit width:              48
[    0.120834] ... generic registers:      4
[    0.120836] ... value mask:             0000ffffffffffff
[    0.120837] ... max period:             000000007fffffff
[    0.120838] ... fixed-purpose events:   3
[    0.120839] ... event mask:             000000070000000f
[    0.125840] Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7
[    0.763146] Brought up 8 CPUs
[    0.763149] Total of 8 processors activated (35116.29 BogoMIPS).
[    0.768129] devtmpfs: initialized
[    0.768585] print_constraints: dummy:
[    0.768623] NET: Registered protocol family 16
[    0.768855] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.768857] ACPI: bus type pci registered
[    0.768967] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.768970] PCI: not using MMCONFIG
[    0.768971] PCI: Using configuration type 1 for base access
[    0.768979] dmi type 0xB1 record - unknown flag
[    0.770168] bio: create slab <bio> at 0
[    0.772025] ACPI: EC: Look up EC in DSDT
[    0.784088] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.793186] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.808402] ACPI: SSDT 00000000cf5d7718 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
[    0.808845] ACPI: Dynamic OEM Table Load:
[    0.808848] ACPI: SSDT           (null) 0067C (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
[    0.811251] ACPI: SSDT 00000000cf5d8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
[    0.811726] ACPI: Dynamic OEM Table Load:
[    0.811728] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
[    0.814112] ACPI: SSDT 00000000cf5d6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
[    0.814546] ACPI: Dynamic OEM Table Load:
[    0.814548] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
[    0.836049] ACPI: Interpreter enabled
[    0.836052] ACPI: (supports S0 S3 S4 S5)
[    0.836072] ACPI: Using IOAPIC for interrupt routing
[    0.836089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.836498] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    1.081455] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[    1.102834] ACPI: No dock devices found.
[    1.102836] HEST: Table not found.
[    1.102839] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.103141] \_SB_.PCI0:_OSC invalid UUID
[    1.103142] _OSC request data:1 8 1f
[    1.103146] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.103707] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.103710] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.103712] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.103715] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
[    1.103717] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    1.103727] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    1.103763] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    1.103789] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.103791] pci 0000:00:01.0: PME# disabled
[    1.103837] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.103862] pci 0000:00:16.0: reg 10: [mem 0xe67b0000-0xe67b000f 64bit]
[    1.103927] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.103931] pci 0000:00:16.0: PME# disabled
[    1.103962] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[    1.103981] pci 0000:00:19.0: reg 10: [mem 0xe6700000-0xe671ffff]
[    1.103991] pci 0000:00:19.0: reg 14: [mem 0xe6780000-0xe6780fff]
[    1.104000] pci 0000:00:19.0: reg 18: [io  0x5040-0x505f]
[    1.104052] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.104056] pci 0000:00:19.0: PME# disabled
[    1.104081] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.104103] pci 0000:00:1a.0: reg 10: [mem 0xe6770000-0xe67703ff]
[    1.104179] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.104183] pci 0000:00:1a.0: PME# disabled
[    1.104209] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.104225] pci 0000:00:1b.0: reg 10: [mem 0xe6760000-0xe6763fff 64bit]
[    1.104282] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.104286] pci 0000:00:1b.0: PME# disabled
[    1.104311] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.104411] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.104416] pci 0000:00:1c.0: PME# disabled
[    1.104449] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    1.104549] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.104554] pci 0000:00:1c.1: PME# disabled
[    1.104589] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[    1.104693] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.104698] pci 0000:00:1c.2: PME# disabled
[    1.104732] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.104833] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.104838] pci 0000:00:1c.3: PME# disabled
[    1.104871] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    1.104939] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.104943] pci 0000:00:1c.5: PME# disabled
[    1.104975] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.104998] pci 0000:00:1d.0: reg 10: [mem 0xe6750000-0xe67503ff]
[    1.105074] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.105078] pci 0000:00:1d.0: PME# disabled
[    1.105103] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[    1.105223] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    1.105242] pci 0000:00:1f.2: reg 10: [io  0x5090-0x5097]
[    1.105251] pci 0000:00:1f.2: reg 14: [io  0x5080-0x5083]
[    1.105260] pci 0000:00:1f.2: reg 18: [io  0x5070-0x5077]
[    1.105268] pci 0000:00:1f.2: reg 1c: [io  0x5060-0x5063]
[    1.105277] pci 0000:00:1f.2: reg 20: [io  0x5020-0x503f]
[    1.105286] pci 0000:00:1f.2: reg 24: [mem 0xe6740000-0xe67407ff]
[    1.105321] pci 0000:00:1f.2: PME# supported from D3hot
[    1.105325] pci 0000:00:1f.2: PME# disabled
[    1.105343] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.105360] pci 0000:00:1f.3: reg 10: [mem 0xe6730000-0xe67300ff 64bit]
[    1.105382] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    1.105442] pci 0000:01:00.0: [10de:1056] type 0 class 0x000300
[    1.105451] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
[    1.105460] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.105470] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    1.105476] pci 0000:01:00.0: reg 24: [io  0x4000-0x407f]
[    1.105483] pci 0000:01:00.0: reg 30: [mem 0xe5000000-0xe507ffff pref]
[    1.105519] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
[    1.105527] pci 0000:01:00.1: reg 10: [mem 0xe5080000-0xe5083fff]
[    1.105587] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.105590] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.105592] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe50fffff]
[    1.105596] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    1.105669] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.105674] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.105680] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.105689] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.105911] pci 0000:03:00.0: [8086:422b] type 0 class 0x000280
[    1.106052] pci 0000:03:00.0: reg 10: [mem 0xe6600000-0xe6601fff 64bit]
[    1.106640] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.106675] pci 0000:03:00.0: PME# disabled
[    1.106846] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.106851] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    1.106855] pci 0000:00:1c.1:   bridge window [mem 0xe6600000-0xe66fffff]
[    1.106862] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.106909] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[    1.106913] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    1.106918] pci 0000:00:1c.2:   bridge window [mem 0xe5b00000-0xe64fffff]
[    1.106924] pci 0000:00:1c.2:   bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[    1.106971] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[    1.106975] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    1.106979] pci 0000:00:1c.3:   bridge window [mem 0xe5100000-0xe5afffff]
[    1.106986] pci 0000:00:1c.3:   bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[    1.107066] pci 0000:0b:00.0: [1217:13f7] type 0 class 0x000c00
[    1.107101] pci 0000:0b:00.0: reg 10: [mem 0xe6530000-0xe6530fff]
[    1.107303] pci 0000:0b:00.0: supports D1 D2
[    1.107304] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.107313] pci 0000:0b:00.0: PME# disabled
[    1.107388] pci 0000:0b:00.1: [1217:8321] type 0 class 0x000805
[    1.107422] pci 0000:0b:00.1: reg 10: [mem 0xe6520000-0xe65201ff]
[    1.107626] pci 0000:0b:00.1: supports D1 D2
[    1.107628] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.107636] pci 0000:0b:00.1: PME# disabled
[    1.107706] pci 0000:0b:00.2: [1217:8331] type 0 class 0x000180
[    1.107739] pci 0000:0b:00.2: reg 10: [mem 0xe6510000-0xe65103ff]
[    1.107785] pci 0000:0b:00.2: reg 18: [mem 0xe6500000-0xe65003ff]
[    1.107945] pci 0000:0b:00.2: supports D1 D2
[    1.107946] pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.107955] pci 0000:0b:00.2: PME# disabled
[    1.108057] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[    1.108062] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
[    1.108066] pci 0000:00:1c.5:   bridge window [mem 0xe6500000-0xe65fffff]
[    1.108073] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.108102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.108237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.108268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.108297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.108328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.108360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.108400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.108475] \_SB_.PCI0:_OSC invalid UUID
[    1.108477] _OSC request data:1 1f 1f
[    1.108481]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.108509] \_SB_.PCI0:_OSC invalid UUID
[    1.108510] _OSC request data:1 0 1d
[    1.112405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.112448] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.112488] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.112529] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.112571] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.112613] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.112653] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    1.112695] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.112851] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.112855] vgaarb: loaded
[    1.113164] PCI: Using ACPI for IRQ routing
[    1.113166] PCI: pci_cache_line_size set to 64 bytes
[    1.113263] reserve RAM buffer: 000000000009a800 - 000000000009ffff
[    1.113266] reserve RAM buffer: 00000000cf271000 - 00000000cfffffff
[    1.113268] reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
[    1.113270] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
[    1.113272] reserve RAM buffer: 000000012e000000 - 000000012fffffff
[    1.113407] NetLabel: Initializing
[    1.113409] NetLabel:  domain hash size = 128
[    1.113410] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.113419] NetLabel:  unlabeled traffic allowed by default
[    1.113428] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.113433] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.115471] Switching to clocksource hpet
[    1.115565] pnp: PnP ACPI init
[    1.115575] ACPI: bus type pnp registered
[    1.115606] Switched to NOHz mode on CPU #0
[    1.115678] Switched to NOHz mode on CPU #5
[    1.115680] Switched to NOHz mode on CPU #4
[    1.115682] Switched to NOHz mode on CPU #3
[    1.115685] Switched to NOHz mode on CPU #6
[    1.115698] Switched to NOHz mode on CPU #1
[    1.115709] Switched to NOHz mode on CPU #7
[    1.115718] Switched to NOHz mode on CPU #2
[    1.115890] pnp 00:00: [bus 00-3e]
[    1.115892] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.115894] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.115896] pnp 00:00: [io  0x0d00-0xffff window]
[    1.115898] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.115899] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.115901] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.115903] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.115904] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.115906] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.115908] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.115910] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.115911] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.115913] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.115915] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.115916] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.115918] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.115920] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.115922] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[    1.115923] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.115993] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.116006] pnp 00:01: [io  0x0000-0x001f]
[    1.116008] pnp 00:01: [io  0x0081-0x0091]
[    1.116009] pnp 00:01: [io  0x0093-0x009f]
[    1.116011] pnp 00:01: [io  0x00c0-0x00df]
[    1.116013] pnp 00:01: [dma 4]
[    1.116050] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.116058] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.116094] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.116167] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.116228] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    1.116231] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    1.116241] pnp 00:04: [io  0x00f0]
[    1.116250] pnp 00:04: [irq 13]
[    1.116289] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.116301] pnp 00:05: [io  0x002e-0x002f]
[    1.116302] pnp 00:05: [io  0x004e-0x004f]
[    1.116304] pnp 00:05: [io  0x0061]
[    1.116305] pnp 00:05: [io  0x0063]
[    1.116307] pnp 00:05: [io  0x0065]
[    1.116308] pnp 00:05: [io  0x0067]
[    1.116309] pnp 00:05: [io  0x0070]
[    1.116311] pnp 00:05: [io  0x0080]
[    1.116312] pnp 00:05: [io  0x0092]
[    1.116313] pnp 00:05: [io  0x00b2-0x00b3]
[    1.116315] pnp 00:05: [io  0x0680-0x069f]
[    1.116316] pnp 00:05: [io  0x1000-0x100f]
[    1.116318] pnp 00:05: [io  0xffff]
[    1.116319] pnp 00:05: [io  0xffff]
[    1.116321] pnp 00:05: [io  0x0400-0x047f]
[    1.116322] pnp 00:05: [io  0x0500-0x057f]
[    1.116323] pnp 00:05: [io  0x164e-0x164f]
[    1.116386] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.116389] system 00:05: [io  0x1000-0x100f] has been reserved
[    1.116391] system 00:05: [io  0xffff] has been reserved
[    1.116393] system 00:05: [io  0xffff] has been reserved
[    1.116395] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.116397] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.116399] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.116402] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.116410] pnp 00:06: [io  0x0070-0x0077]
[    1.116416] pnp 00:06: [irq 8]
[    1.116454] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.116464] pnp 00:07: [io  0x0060]
[    1.116465] pnp 00:07: [io  0x0064]
[    1.116470] pnp 00:07: [irq 1]
[    1.116507] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.143776] pnp 00:08: [io  0x03f8-0x03ff]
[    1.143782] pnp 00:08: [irq 4]
[    1.143851] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.191709] pnp 00:09: [io  0x0378-0x037b]
[    1.191715] pnp 00:09: [irq 7]
[    1.191782] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    1.191794] pnp 00:0a: [irq 12]
[    1.191836] pnp 00:0a: Plug and Play ACPI device, IDs DLL0494 PNP0f13 (active)
[    1.191983] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    1.191985] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[    1.191987] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    1.191988] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    1.191990] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    1.191992] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    1.191993] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[    1.191995] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    1.191996] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    1.191998] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    1.192000] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.192002] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.192079] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.192082] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.192084] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.192086] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.192088] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.192090] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.192092] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.192095] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.192097] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.192099] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[    1.192102] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.208641] pnp 00:0c: [irq 23]
[    1.208696] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[    1.287810] pnp 00:0d: can't evaluate _CRS: 12311
[    1.287893] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.287903] pnp: PnP ACPI: found 14 devices
[    1.287905] ACPI: ACPI bus type pnp unregistered
[    1.295270] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.295272] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    1.295276] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe50fffff]
[    1.295279] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    1.295283] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.295284] pci 0000:00:1c.0:   bridge window [io  disabled]
[    1.295289] pci 0000:00:1c.0:   bridge window [mem disabled]
[    1.295294] pci 0000:00:1c.0:   bridge window [mem pref disabled]
[    1.295300] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.295302] pci 0000:00:1c.1:   bridge window [io  disabled]
[    1.295307] pci 0000:00:1c.1:   bridge window [mem 0xe6600000-0xe66fffff]
[    1.295312] pci 0000:00:1c.1:   bridge window [mem pref disabled]
[    1.295318] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[    1.295321] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    1.295327] pci 0000:00:1c.2:   bridge window [mem 0xe5b00000-0xe64fffff]
[    1.295331] pci 0000:00:1c.2:   bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[    1.295338] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[    1.295341] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    1.295347] pci 0000:00:1c.3:   bridge window [mem 0xe5100000-0xe5afffff]
[    1.295351] pci 0000:00:1c.3:   bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[    1.295358] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[    1.295359] pci 0000:00:1c.5:   bridge window [io  disabled]
[    1.295365] pci 0000:00:1c.5:   bridge window [mem 0xe6500000-0xe65fffff]
[    1.295369] pci 0000:00:1c.5:   bridge window [mem pref disabled]
[    1.295385] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.295388] pci 0000:00:01.0: setting latency timer to 64
[    1.295394] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.295399] pci 0000:00:1c.0: setting latency timer to 64
[    1.295409] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.295413] pci 0000:00:1c.1: setting latency timer to 64
[    1.295487] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.295491] pci 0000:00:1c.2: setting latency timer to 64
[    1.295502] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.295506] pci 0000:00:1c.3: setting latency timer to 64
[    1.295513] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.295517] pci 0000:00:1c.5: setting latency timer to 64
[    1.295521] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.295523] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.295525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.295526] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
[    1.295528] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    1.295530] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    1.295532] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
[    1.295534] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[    1.295536] pci_bus 0000:03: resource 1 [mem 0xe6600000-0xe66fffff]
[    1.295538] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    1.295540] pci_bus 0000:04: resource 1 [mem 0xe5b00000-0xe64fffff]
[    1.295541] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
[    1.295543] pci_bus 0000:0a: resource 0 [io  0x2000-0x2fff]
[    1.295545] pci_bus 0000:0a: resource 1 [mem 0xe5100000-0xe5afffff]
[    1.295547] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[    1.295549] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
[    1.295570] NET: Registered protocol family 2
[    1.295703] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.296595] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.298231] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.298455] TCP: Hash tables configured (established 524288 bind 65536)
[    1.298457] TCP reno registered
[    1.298466] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.298490] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.298599] NET: Registered protocol family 1
[    1.298715] pci 0000:01:00.0: Boot video device
[    1.298739] PCI: CLS 64 bytes, default 64
[    1.298776] Unpacking initramfs...
[    1.530637] Freeing initrd memory: 11944k freed
[    1.532249] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.532254] Placing 64MB software IO TLB between ffff8800cae6f000 - ffff8800cee6f000
[    1.532256] software IO TLB at phys 0xcae6f000 - 0xcee6f000
[    1.532367] Simple Boot Flag at 0xf3 set to 0x1
[    1.533909] audit: initializing netlink socket (disabled)
[    1.533918] type=2000 audit(1304602399.334:1): initialized
[    1.534211] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.537035] VFS: Disk quotas dquot_6.5.2
[    1.537105] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.537224] msgmni has been set to 7841
[    1.537417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    1.537431] io scheduler noop registered
[    1.537433] io scheduler deadline registered
[    1.537477] io scheduler cfq registered (default)
[    1.537562] pcieport 0000:00:01.0: setting latency timer to 64
[    1.537590] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.538138] efifb: probing for efifb
[    1.539895] efifb: framebuffer at 0xe1000000, mapped to 0xffffc90005100000, using 8128k, total 8128k
[    1.539897] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.539898] efifb: scrolling: redraw
[    1.539900] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.659352] Console: switching to colour frame buffer device 240x67
[    1.772257] fb0: EFI VGA frame buffer device
[    1.772260] intel_idle: MWAIT substates: 0x21120
[    1.772261] intel_idle: v0.4 model 0x2A
[    1.772262] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.772467] ERST: Table is not found!
[    1.772533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.793326] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.878778] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.896109] Linux agpgart interface v0.103
[    1.896196] Fixed MDIO Bus: probed
[    1.896282] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.896499] i8042: Warning: Keylock active
[    1.897742] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.897771] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.897911] mousedev: PS/2 mouse device common for all mice
[    1.898680] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.898810] cpuidle: using governor ladder
[    1.900395] cpuidle: using governor menu
[    1.900606] TCP cubic registered
[    1.900772] NET: Registered protocol family 10
[    1.901292] Registering the dns_resolver key type
[    1.901424] registered taskstats version 1
[    1.903159] Freeing unused kernel memory: 752k freed
[    1.903262] Write protecting the kernel read-only data: 6144k
[    1.904252] Freeing unused kernel memory: 288k freed
[    1.906734] Freeing unused kernel memory: 876k freed
[    1.906862] BFS CPU scheduler v0.400 by Con Kolivas.
[    1.963435] <30>udevd[746]: starting version 168
[    1.987419] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[    1.987422] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    1.988742] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.988755] e1000e 0000:00:19.0: setting latency timer to 64
[    1.989030] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    2.002894] usbcore: registered new interface driver usbfs
[    2.002916] usbcore: registered new interface driver hub
[    2.002949] usbcore: registered new device driver usb
[    2.005394] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.005715] thermal LNXTHERM:00: registered as thermal_zone0
[    2.005718] ACPI: Thermal Zone [THM] (25 C)
[    2.014568] sdhci: Secure Digital Host Controller Interface driver
[    2.014570] sdhci: Copyright(c) Pierre Ossman
[    2.025459] SCSI subsystem initialized
[    2.025509] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[    2.025527] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    2.025560] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[    2.026311] sdhci-pci 0000:0b:00.1: setting latency timer to 64
[    2.026331] _regulator_get: 0000:0b:00.1 supply vmmc not found, using dummy regulator
[    2.026361] Registered led device: mmc0::
[    2.026396] mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
[    2.026541] firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.026549] firewire_ohci 0000:0b:00.0: setting latency timer to 64
[    2.038075] libata version 3.00 loaded.
[    2.077828] firewire_ohci 0000:0b:00.0: irq 42 for MSI/MSI-X
[    2.077890] firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
[    2.231487] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:26:0a:4b:ec:da
[    2.231490] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.231539] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 4041FF-0FF
[    2.231599] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.231665] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.231669] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.231690] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.241508] ehci_hcd 0000:00:1a.0: debug port 2
[    2.245395] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.245413] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6770000
[    2.254460] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.254493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.254495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.254497] usb usb1: Product: EHCI Host Controller
[    2.254499] usb usb1: Manufacturer: Linux 2.6.38-4.towo.1-frickel-amd64 ehci_hcd
[    2.254501] usb usb1: SerialNumber: 0000:00:1a.0
[    2.254624] hub 1-0:1.0: USB hub found
[    2.254628] hub 1-0:1.0: 2 ports detected
[    2.254722] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.254749] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.254753] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.254761] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.260473] ehci_hcd 0000:00:1d.0: debug port 2
[    2.264364] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.264384] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe6750000
[    2.273440] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.273471] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.273474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.273476] usb usb2: Product: EHCI Host Controller
[    2.273477] usb usb2: Manufacturer: Linux 2.6.38-4.towo.1-frickel-amd64 ehci_hcd
[    2.273479] usb usb2: SerialNumber: 0000:00:1d.0
[    2.273598] hub 2-0:1.0: USB hub found
[    2.273602] hub 2-0:1.0: 2 ports detected
[    2.273701] ahci 0000:00:1f.2: version 3.0
[    2.273715] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.273810] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.273839] ahci: SSS flag set, parallel bus scan disabled
[    2.284455] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[    2.284460] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[    2.284466] ahci 0000:00:1f.2: setting latency timer to 64
[    2.292836] scsi0 : ahci
[    2.292911] scsi1 : ahci
[    2.292961] scsi2 : ahci
[    2.293022] scsi3 : ahci
[    2.293068] scsi4 : ahci
[    2.293113] scsi5 : ahci
[    2.392379] ata1: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740100 irq 43
[    2.392384] ata2: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740180 irq 43
[    2.392386] ata3: DUMMY
[    2.392388] ata4: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740280 irq 43
[    2.392392] ata5: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740300 irq 43
[    2.392395] ata6: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740380 irq 43
[    2.533174] Refined TSC clocksource calibration: 2195.013 MHz.
[    2.533178] Switching to clocksource tsc
[    2.557139] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.578199] firewire_core: created device fw0: GUID 012912c1394fc000, S400
[    2.671668] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.671678] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.671908] hub 1-1:1.0: USB hub found
[    2.672021] hub 1-1:1.0: 6 ports detected
[    2.696966] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.735383] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.735838] ata1.00: ATA-8: ST9500420AS, D005SDM1, max UDMA/133
[    2.735867] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.774835] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    2.775271] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.775599] ata1.00: configured for UDMA/133
[    2.775754] scsi 0:0:0:0: Direct-Access     ATA      ST9500420AS      D005 PQ: 0 ANSI: 5
[    2.889155] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.889165] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.889434] hub 2-1:1.0: USB hub found
[    2.889499] hub 2-1:1.0: 8 ports detected
[    2.963916] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[    3.049107] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2513
[    3.049117] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.049359] hub 1-1.1:1.0: USB hub found
[    3.049445] hub 1-1.1:1.0: 3 ports detected
[    3.122793] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[    3.208146] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2513
[    3.208150] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.208460] hub 1-1.2:1.0: USB hub found
[    3.208521] hub 1-1.2:1.0: 3 ports detected
[    3.282600] usb 1-1.4: new full speed USB device using ehci_hcd and address 5
[    3.362474] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
[    3.362478] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.362480] usb 1-1.4: Product: DW375 Bluetooth Module
[    3.362481] usb 1-1.4: Manufacturer: Dell Computer Corp
[    3.362483] usb 1-1.4: SerialNumber: C0CB38AE5582
[    3.436356] usb 1-1.5: new high speed USB device using ehci_hcd and address 6
[    3.498105] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.509617] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633J, D300, max UDMA/100
[    3.519886] ata2.00: configured for UDMA/100
[    3.529116] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=181c
[    3.529125] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.529138] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[    3.529140] usb 1-1.5: Manufacturer: CN0CJ3P27248713503Z9A00
[    3.529916] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-U633J D300 PQ: 0 ANSI: 5
[    3.603171] usb 2-1.8: new full speed USB device using ehci_hcd and address 3
[    3.714352] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
[    3.714356] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.714358] usb 2-1.8: Product: 5880
[    3.714360] usb 2-1.8: Manufacturer: Broadcom Corp
[    3.714362] usb 2-1.8&#

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.709
nvidia module crashed
« Reply #1 on: 2011/05/05, 19:32:29 »
das war: 1.) das falsche log, 2.) sollte das richtige log (/var/log/Xorg.0.log)in eine codebox
Code: [Select]
... und 3.) vermute ich einfach mal, im upgrade war ein neuer xserver. und was rät das manual in dem fall?

greetz
devil

kris99

  • Guest
[gelöst] nvidia module crashed
« Reply #2 on: 2011/05/06, 11:18:11 »
Also, es sind nicht immer alle so blöd wie es ausschaut, manchmal versagt auch die Technik. In der 'Vorschau' waren noch alle Logs in Codeboxen und die genaue Beschreibung des Problems mit dem was ich alles schon probiert habe am Ende des Postings. Da ich gestern schnell weg mußte, habe ich mir nach dem 'Absenden' nicht mehr die Message angeschaut. Kann es sein, daß das dmesg log für die Code-box oder sogar das gesamte Posting zu lang war? Jedenfalls habe ich den dmesg log absichtlich gepostet, da dort der einzige brauchbar Hinweis zu finden war, warum der Desktop bzw. X nicht mehr startet. Allerdings ist im Posting das dmesg log nicht komplett, daher wohl auch die fehlenden Codebox. Ich versuche das ganze nochmal.

EDIT: Bingo, die codebox mit dmesg ist zu lang. Daher nur der letzte Teil von dmesg. Falls jemand genauere Hardware bzw. Kernelmessages braucht, kann ich das nochmal einzeln posten.

Also hier nochmal die Beschreibung des Problems:

Infos zum System: ein Dell Laptop E6520 mit NVIDIA NVS 4200M (optimus Option disabled im BIOS).
Repos: die 'normalen' debian und aptosid sowie experimental,  qt-kde.debian.net: experimental-snapshots und frickelplatz.de.
Software: Xorg 1.10, KDE 4.6.2, nvidia 270.41.06-1, ... bleeding bleeding edge halt  :wink:
Code: [Select]

root@marvin2:~[0]# infobash -v3
Host/Kernel/OS  "marvin2" running Linux 2.6.38-4.towo.1-frickel-amd64 x86_64 [ aptosid 2011-01 Γῆρας - kde-full - (201102052200) ]
CPU Info        8x Intel Core i7-2720QM @ 6144 KB cache flags( sse3 ht nx lm vmx ) clocked at [ 800.000 MHz ]                                                                                                    
Videocard       nVidia Device 1056  tty resolution ( 209x83 )                                                                                                                                                    
Network cards   Intel 82579LM Gigabit                                                                                                                                                                            
                Intel Centrino Ultimate-N 6300                                                                                                                                                                  
Processes 110 | Uptime 1:02 | Memory 105.3/3922.8MB | HDD ST9500420AS Size 500GB (6%used) | Runlevel 3 | Client Shell | Infobash v3.36


Das OS habe ich frisch von der DVD aptosid 2011-01 installiert und erst nach dem Hinzufügen der weiteren Repos (s. o.) ein D-U gemacht.

/var/log/apt/history.log:

Code: [Select]
Start-Date: 2011-05-05  09:08:14
Commandline: apt-get install --reinstall nvidia-glx
End-Date: 2011-05-05  09:08:20

Start-Date: 2011-05-05  10:14:48
Commandline: apt-get dist-upgrade
Upgrade: xserver-xorg-video-openchrome:amd64 (0.2.904+svn918-1+b1, 0.2.904+svn920-1), g++-4.4:amd64 (4.4.6-2, 4.4.6-3), gcc-4.4-base:amd64 (4.4.6-2, 4.4.6-3), libwps-0.2-2:amd64 (0.2.0-3, 0.2.2-1), gcc-4.4:amd64 (4.4.6-2, 4.4.6-3), libwpd-0.9-9:amd64 (0.9.1-3, 0.9.2-1), cpp-4.4:amd64 (4.4.6-2, 4.4.6-3), libaudio2:amd64 (1.9.2-6, 1.9.2-7), libstdc++6-4.4-dev:amd64 (4.4.6-2, 4.4.6-3)
End-Date: 2011-05-05  10:15:04

Start-Date: 2011-05-05  10:31:59
Commandline: apt-get install --reinstall nvidia-glx
End-Date: 2011-05-05  10:32:05


Um 9:09 h habe ich noch ein funktionierenden Desktop gehabt, bis ich auf die glorreiche Idee kam um 10:14 h im runlevel 3 nochmal ein D-U zu machen. Seitdem trapped das nvidia Modul.

Ich habe auch das D-U rückgängig gemacht, was aber am Trap des nvidia modules nichts geändert hat. Der Nouveau Treiber funktioniert auch nicht. Der proprietäre Treiber von NVIDIA erzeugt den gleichen Trap.

Das Xorg.0.log gibt nicht viel her:

Code: [Select]

[  6166.347]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[  6166.347] X Protocol Version 11, Revision 0
[  6166.347] Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
[  6166.347] Current Operating System: Linux marvin2 2.6.38-4.towo.1-frickel-amd64 #1 SMP PREEMPT Sat Apr 23 18:35:39 UTC 2011 x86_64
[  6166.347] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-4.towo.1-frickel-amd64 root=/dev/mapper/sda3_crypt ro cryptopts=source=UUID=fd48e0da-e6bc-42b3-badf-f49faab3b7a1,target=sda3_crypt quiet 3
[  6166.347] Build Date: 28 April 2011  12:13:00PM
[  6166.347] xorg-server 2:1.10.1-2 (Julien Cristau <jcristau>)
[  6166.347] Current version of pixman: 0.21.8
[  6166.347]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  6166.347] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  6166.347] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  6 11:24:12 2011
[  6166.359] (==) Using config file: "/etc/X11/xorg.conf"
[  6166.359] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  6166.414] (==) ServerLayout "Layout0"
[  6166.414] (**) |-->Screen "Screen0" (0)
[  6166.414] (**) |   |-->Monitor "Monitor0"
[  6166.415] (**) |   |-->Device "Device0"
[  6166.415] (**) |-->Input Device "Keyboard0"
[  6166.415] (**) |-->Input Device "Mouse0"
[  6166.415] (==) Automatically adding devices
[  6166.415] (==) Automatically enabling devices
[  6166.431] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  6166.431]    Entry deleted from font path.
[  6166.433] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[  6166.433]    Entry deleted from font path.
[  6166.433] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  6166.433]    Entry deleted from font path.
[  6166.433] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[  6166.433] (==) ModulePath set to "/usr/lib/xorg/modules"
[  6166.433] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  6166.433] (WW) Disabling Keyboard0
[  6166.433] (WW) Disabling Mouse0
[  6166.433] (II) Loader magic: 0x7dba00
[  6166.433] (II) Module ABI versions:
[  6166.433]    X.Org ANSI C Emulation: 0.4
[  6166.433]    X.Org Video Driver: 10.0
[  6166.433]    X.Org XInput driver : 12.2
[  6166.433]    X.Org Server Extension : 5.0
[  6166.434] (--) PCI:*(0:1:0:0) 10de:1056:1028:0494 rev 161, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[  6166.434] (II) Open ACPI successful (/var/run/acpid.socket)
[  6166.434] (II) LoadModule: "extmod"
[  6166.442] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  6166.451] (II) Module extmod: vendor="X.Org Foundation"
[  6166.451]    compiled for 1.10.1, module version = 1.0.0
[  6166.451]    Module class: X.Org Server Extension
[  6166.451]    ABI class: X.Org Server Extension, version 5.0
[  6166.451] (II) Loading extension SELinux
[  6166.451] (II) Loading extension MIT-SCREEN-SAVER
[  6166.451] (II) Loading extension XFree86-VidModeExtension
[  6166.451] (II) Loading extension XFree86-DGA
[  6166.451] (II) Loading extension DPMS
[  6166.451] (II) Loading extension XVideo
[  6166.451] (II) Loading extension XVideo-MotionCompensation
[  6166.451] (II) Loading extension X-Resource
[  6166.451] (II) LoadModule: "dbe"
[  6166.452] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  6166.452] (II) Module dbe: vendor="X.Org Foundation"
[  6166.452]    compiled for 1.10.1, module version = 1.0.0
[  6166.452]    Module class: X.Org Server Extension
[  6166.452]    ABI class: X.Org Server Extension, version 5.0
[  6166.452] (II) Loading extension DOUBLE-BUFFER
[  6166.452] (II) LoadModule: "glx"
[  6166.453] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  6166.867] (II) Module glx: vendor="NVIDIA Corporation"
[  6166.876]    compiled for 4.0.2, module version = 1.0.0
[  6166.876]    Module class: X.Org Server Extension
[  6166.876] (II) NVIDIA GLX Module  270.41.06  Mon Apr 18 15:10:15 PDT 2011
[  6166.876] (II) Loading extension GLX
[  6166.876] (II) LoadModule: "record"
[  6166.876] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  6166.889] (II) Module record: vendor="X.Org Foundation"
[  6166.889]    compiled for 1.10.1, module version = 1.13.0
[  6166.889]    Module class: X.Org Server Extension
[  6166.889]    ABI class: X.Org Server Extension, version 5.0
[  6166.889] (II) Loading extension RECORD
[  6166.889] (II) LoadModule: "dri"
[  6166.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  6166.912] (II) Module dri: vendor="X.Org Foundation"
[  6166.912]    compiled for 1.10.1, module version = 1.0.0
[  6166.912]    ABI class: X.Org Server Extension, version 5.0
[  6166.912] (II) Loading extension XFree86-DRI
[  6166.912] (II) LoadModule: "dri2"
[  6166.912] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  6166.919] (II) Module dri2: vendor="X.Org Foundation"
[  6166.919]    compiled for 1.10.1, module version = 1.2.0
[  6166.919]    ABI class: X.Org Server Extension, version 5.0
[  6166.919] (II) Loading extension DRI2
[  6166.919] (II) LoadModule: "nvidia"
[  6166.919] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  6166.977] (II) Module nvidia: vendor="NVIDIA Corporation"
[  6166.979]    compiled for 4.0.2, module version = 1.0.0
[  6166.979]    Module class: X.Org Video Driver
[  6166.998] (II) NVIDIA dlloader X Driver  270.41.06  Mon Apr 18 14:55:25 PDT 2011
[  6166.998] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  6167.000] (++) using VT number 7

[  6167.101] (II) Loading sub module "fb"
[  6167.101] (II) LoadModule: "fb"
[  6167.101] (II) Loading /usr/lib/xorg/modules/libfb.so
[  6167.114] (II) Module fb: vendor="X.Org Foundation"
[  6167.114]    compiled for 1.10.1, module version = 1.0.0
[  6167.114]    ABI class: X.Org ANSI C Emulation, version 0.4
[  6167.114] (II) Loading sub module "wfb"
[  6167.114] (II) LoadModule: "wfb"
[  6167.114] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  6167.121] (II) Module wfb: vendor="X.Org Foundation"
[  6167.121]    compiled for 1.10.1, module version = 1.0.0
[  6167.121]    ABI class: X.Org ANSI C Emulation, version 0.4
[  6167.121] (II) Loading sub module "ramdac"
[  6167.121] (II) LoadModule: "ramdac"
[  6167.121] (II) Module "ramdac" already built-in
[  6167.140] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  6167.140] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  6167.140] (II) Loading /usr/lib/xorg/modules/libfb.so
[  6167.144] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  6167.144] (==) NVIDIA(0): RGB weight 888
[  6167.144] (==) NVIDIA(0): Default visual is TrueColor
[  6167.144] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)


dmesg log:


Code: [Select]

[   70.025034] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   70.025811] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   80.563281] eth0: no IPv6 routers present
[ 6161.161449] BUG: unable to handle kernel paging request at ffffffffa12aa416
[ 6161.161454] IP: [<ffffffffa063e578>] _nv028301rm+0x44/0x176 [nvidia]
[ 6161.161547] PGD 1605067 PUD 1609063 PMD 0
[ 6161.161550] Oops: 0000 [#1] PREEMPT SMP
[ 6161.161552] last sysfs file: /sys/bus/acpi/drivers/NVIDIA ACPI Video Driver/uevent
[ 6161.161554] CPU 0
[ 6161.161554] Modules linked in: sco bnep rfcomm l2cap acpi_cpufreq mperf cpufreq_ondemand cpufreq_powersave cpufreq_stats af_packet freq_table ppdev cpufreq_conservative kvm_intel lp cpufreq_performance kvm fuse ext2 nls_utf8 nls_cp437 vfat fat nvidia(P) snd_hda_codec_hdmi arc4 snd_hda_codec_idt ecb snd_hda_intel snd_hda_codec snd_hwdep uvcvideo videodev iwlagn snd_pcm snd_seq snd_seq_device rtc_cmos rtc_core dell_wmi parport_pc iwlcore v4l2_compat_ioctl32 intel_agp btusb snd_timer dell_laptop i2c_i801 sparse_keymap joydev serio_raw rtc_lib parport bluetooth snd tpm_tis mac80211 psmouse soundcore evdev tpm pcspkr dcdbas i2c_core tpm_bios intel_gtt wmi battery cfg80211 snd_page_alloc rfkill processor video button ac ext4 mbcache jbd2 crc16 fpu aesni_intel cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod sg sd_mod sr_mod cdrom crc_t10dif usbhid hid ahci libahci libata sdhci_pci scsi_mod ehci_hcd usbcore sdhci mmc_core firewire_ohci thermal firewire_core crc_itu_t e1000e nls_base [last unloaded: scsi_wait_scan]
[ 6161.161600]
[ 6161.161602] Pid: 3265, comm: Xorg Tainted: P            2.6.38-4.towo.1-frickel-amd64 #1 Dell Inc. Latitude E6520/0J4TFW
[ 6161.161605] RIP: 0010:[<ffffffffa063e578>]  [<ffffffffa063e578>] _nv028301rm+0x44/0x176 [nvidia]
[ 6161.161673] RSP: 0018:ffff8801284c7b78  EFLAGS: 00010282
[ 6161.161674] RAX: ffff88012706c000 RBX: ffff880126b2c000 RCX: 0000000000000001
[ 6161.161675] RDX: ffff88012706c000 RSI: 0000000000000015 RDI: ffff88012757c000
[ 6161.161676] RBP: ffff8801274caf68 R08: ffff880126b70000 R09: ffff880126f67000
[ 6161.161677] R10: 00000000ffffffff R11: 0000000000000077 R12: ffff880125c22000
[ 6161.161679] R13: ffff88012757c000 R14: ffff88012706c000 R15: ffff880128387800
[ 6161.161680] FS:  00007f690c581880(0000) GS:ffff8800cf000000(0000) knlGS:0000000000000000
[ 6161.161682] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6161.161683] CR2: ffffffffa12aa416 CR3: 0000000125cc1000 CR4: 00000000000406f0
[ 6161.161684] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6161.161685] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6161.161687] Process Xorg (pid: 3265, threadinfo ffff8801284c6000, task ffff8801267355c0)
[ 6161.161688] Stack:
[ 6161.161689]  ffffc900059de000 ffff88012757c000 ffff8801274cafe8 ffff880125c22000
[ 6161.161691]  ffffc900059de000 ffffffffa09e695b ffff88012706c000 ffff880128387800
[ 6161.161693]  ffff88012757c000 ffffc900059de000 ffff880128385800 ffffffffa09e7983
[ 6161.161695] Call Trace:
[ 6161.161748]  [<ffffffffa09e695b>] ? _nv002401rm+0x218/0x260 [nvidia]
[ 6161.161797]  [<ffffffffa09e7983>] ? _nv002394rm+0x41b/0x685 [nvidia]
[ 6161.161846]  [<ffffffffa09ed51d>] ? rm_init_adapter+0x9d/0x111 [nvidia]
[ 6161.161892]  [<ffffffffa0a09104>] ? nv_kern_open+0x464/0x6a0 [nvidia]
[ 6161.161895]  [<ffffffff8110e0f7>] ? chrdev_open+0x117/0x210
[ 6161.161897]  [<ffffffff8110dfe0>] ? chrdev_open+0x0/0x210
[ 6161.161899]  [<ffffffff811083ac>] ? __dentry_open+0x11c/0x320
[ 6161.161902]  [<ffffffff813b00b0>] ? _raw_spin_unlock+0x10/0x40
[ 6161.161904]  [<ffffffff81118208>] ? finish_open+0xc8/0x190
[ 6161.161906]  [<ffffffff81117a32>] ? do_path_lookup+0x82/0x160
[ 6161.161908]  [<ffffffff8111895a>] ? do_filp_open+0x2aa/0x780
[ 6161.161909]  [<ffffffff81124289>] ? setattr_copy+0x99/0x130
[ 6161.161912]  [<ffffffff81045419>] ? get_parent_ip+0x9/0x20
[ 6161.161914]  [<ffffffff813b00b0>] ? _raw_spin_unlock+0x10/0x40
[ 6161.161916]  [<ffffffff81125124>] ? alloc_fd+0xe4/0x140
[ 6161.161918]  [<ffffffff81109666>] ? do_sys_open+0x66/0x110
[ 6161.161920]  [<ffffffff8100bdd2>] ? system_call_fastpath+0x16/0x1b
[ 6161.161921] Code: 00 ba 00 00 00 00 be 3c 00 00 00 41 ff 55 20 48 89 c3 b9 01 00 00 00 ba 00 00 00 00 be 15 00 00 00 4c 89 ef 41 ff 55 20 49 89 c6 <48> 8b 05 97 be c6 00 48 89 45 10 8b 05 95 be c6 00 89 45 18 0f
[ 6161.161940] RIP  [<ffffffffa063e578>] _nv028301rm+0x44/0x176 [nvidia]
[ 6161.162007]  RSP <ffff8801284c7b78>
[ 6161.162007] CR2: ffffffffa12aa416
[ 6161.162009] ---[ end trace ec1652cd66c93b9f ]---




Ausgabe vom SSH-Terminal, wenn ich in den runlevel 5 wechsle:
Code: [Select]

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.161550] Oops: 0000 [#1] PREEMPT SMP

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.161552] last sysfs file: /sys/bus/acpi/drivers/NVIDIA ACPI Video Driver/uevent

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.161688] Stack:

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.161695] Call Trace:

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.161921] Code: 00 ba 00 00 00 00 be 3c 00 00 00 41 ff 55 20 48 89 c3 b9 01 00 00 00 ba 00 00 00 00 be 15 00 00 00 4c 89 ef 41 ff 55 20 49 89 c6 <48> 8b 05 97 be c6 00 48 89 45 10 8b 05 95 be c6 00 89 45 18 0f

Message from syslogd@marvin2 at May  6 11:24:13 ...
 kernel:[ 6161.162007] CR2: ffffffffa12aa416



Das nouveau modul ist blacklisted. Hat einer von Euch eine Idee, was ich noch versuchen könnte?

Gruß

Kris


EDIT 2: ich habe noch die Message vom SSH-Terminal angehängt, die den Kernel Modul Trap zeigt. Deckt sich aber mit dmesg.

Offline towo

  • Administrator
  • User
  • *****
  • Posts: 2.658
[gelöst] nvidia module crashed
« Reply #3 on: 2011/05/06, 11:36:19 »
Nimm den aptosid-kernel, probiers damit.
Ich gehe nicht zum Karneval, ich verleihe nur manchmal mein Gesicht.

kris99

  • Guest
[gelöst] nvidia module crashed
« Reply #4 on: 2011/05/06, 12:07:33 »
Exakt das gleiche Verhalten mit dem Kernel 2.6.38-5.slh.1-aptosid-amd64.

Offline towo

  • Administrator
  • User
  • *****
  • Posts: 2.658
[gelöst] nvidia module crashed
« Reply #5 on: 2011/05/06, 12:18:05 »
dpkg -l | grep nvidia
Ich gehe nicht zum Karneval, ich verleihe nur manchmal mein Gesicht.

kris99

  • Guest
[gelöst] nvidia module crashed
« Reply #6 on: 2011/05/06, 13:53:55 »
Code: [Select]
dpkg -l |grep nvidia
ii  libgl1-nvidia-alternatives                  270.41.06-1                                simplifies replacing MESA libGL with GPU vendor libraries
ii  libgl1-nvidia-alternatives-ia32             270.41.06-1                                simplifies replacing MESA libGL with GPU vendor libraries (32-bit)
ii  libgl1-nvidia-glx                           270.41.06-1                                NVIDIA binary OpenGL libraries
ii  libgl1-nvidia-glx-ia32                      270.41.06-1                                NVIDIA binary OpenGL 32-bit libraries
ii  libglx-nvidia-alternatives                  270.41.06-1                                simplifies replacing Xorg module libglx.so with GPU vendor library
ii  nvidia-common                               20110426+1                                 NVIDIA binary graphics driver support files
ii  nvidia-glx                                  270.41.06-1                                NVIDIA binary Xorg driver
ii  nvidia-glx-ia32                             270.41.06-1                                NVIDIA binary driver 32-bit libs
ii  nvidia-kernel-2.6.38-4.towo.1-frickel-amd64 270.41.06-1+2.6.38-11                      NVIDIA binary kernel module for Linux 2.6.38-4.towo.1-frickel-amd64
ii  nvidia-kernel-2.6.38-5.slh.1-aptosid-amd64  270.41.06-1+2.6.38-5.slh.1-aptosid-amd64-0 NVIDIA binary kernel module for Linux 2.6.38-5.slh.1-aptosid-amd64
ii  nvidia-kernel-common                        20110426+1                                 NVIDIA binary kernel module support files
ii  nvidia-kernel-dkms                          270.41.06-1                                NVIDIA binary kernel module DKMS source
ii  nvidia-kernel-source                        270.41.06-1                                NVIDIA binary kernel module source

kris99

  • Guest
[gelöst] nvidia module crashed
« Reply #7 on: 2011/05/08, 20:00:18 »
Nach einer Neuinstallation funktioniert das nvidia Modul wieder wie erwartet. Die eigentliche Ursache habe ich leider nicht finden können.

Kris