Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: [DE] Dv Kamera wird am firewire Anschluss nicht erkannt  (Read 3780 times)

calopus

  • Guest
[DE] Dv Kamera wird am firewire Anschluss nicht erkannt
« on: 2010/11/14, 21:37:33 »
Habe mal meine alte Medion(Samsung) DV Kamera angeschlossen und wollte mit kdenlive ein Band digitalisieren aber es gibt keine Verbindung.
Folgende Ausgaben habe ich :
Code: [Select]
~$ lsmod
Module                  Size  Used by

firewire_ohci          26432  0
firewire_core          47867  1 firewire_ohci
ehci_hcd               36741  0
atl1                   29310  0
thermal                 7410  0
usbcore               135848  6 usblp,usbhid,usb_storage,ohci_hcd,ehci_hcd
crc_itu_t               1315  1 firewire_core
scsi_mod              138869  5 sg,usb_storage,sr_mod,sd_mod,libata
pcmcia                 34350  1 ssb
mii                     3778  1 atl1
pcmcia_core            11773  1 pcmcia
nls_base                6657  1 usbcore


Code: [Select]
$ dvgrab
Error: no camera exists


Code: [Select]
$ lspci |grep 1394
03:07.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host Controller (rev 01)


gegoogled hab ich leider ohne Erfolg

merci
calopus

Offline ralfi

  • User
  • Posts: 389
Dv Kamera wird am firewire Anschluss nicht erkannt
« Reply #1 on: 2010/11/15, 08:34:11 »
Hallo calopus,

was sagt denn das syslog ? Hast du mal mit vlc versucht, um ein kdenlive Fehler auszuschliessen ? Ich hab leider mein
Notebook mit Firewire Anschluss nicht hier aber kann mich erinnern dass die firewire module / dvgrab immer ein bisschen zickten. Wenn das dvgrab nicht geht brauchts du kdenlive nicht versuchen.
Gruss, ralfi

Niveau sieht von unten oft wie Arroganz aus ...

calopus

  • Guest
Dv Kamera wird am firewire Anschluss nicht erkannt
« Reply #2 on: 2010/11/15, 09:55:39 »
Hallo ralfi,
also syslog habe ich durchgeschaut und folgendes gefunden:
Code: [Select]

# grep -i -n "firewire" /var/log/syslog.1
484:Nov 14 21:00:01 aptosidesk kernel: [    0.794035] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
549:Nov 14 21:00:01 aptosidesk kernel: [    1.053010] firewire_ohci: failed to read phy reg
550:Nov 14 21:00:01 aptosidesk kernel: [    1.053165] firewire_ohci 0000:03:07.0: PCI INT A disabled
551:Nov 14 21:00:01 aptosidesk kernel: [    1.053180] firewire_ohci: probe of 0000:03:07.0 failed with error -16
1359:Nov 14 22:17:29 aptosidesk kernel: [    0.778045] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
1439:Nov 14 22:17:29 aptosidesk kernel: [    1.032016] firewire_ohci: failed to read phy reg
1440:Nov 14 22:17:29 aptosidesk kernel: [    1.032177] firewire_ohci 0000:03:07.0: PCI INT A disabled
1441:Nov 14 22:17:29 aptosidesk kernel: [    1.032193] firewire_ohci: probe of 0000:03:07.0 failed with error -16
2252:Nov 15 08:51:55 aptosidesk kernel: [    0.779053] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
2340:Nov 15 08:51:55 aptosidesk kernel: [    1.042011] firewire_ohci: failed to read phy reg
2341:Nov 15 08:51:55 aptosidesk kernel: [    1.042167] firewire_ohci 0000:03:07.0: PCI INT A disabled
2342:Nov 15 08:51:55 aptosidesk kernel: [    1.042183] firewire_ohci: probe of 0000:03:07.0 failed with error -16


muss ich das so interpretieren dass diese Firewirekarte unter Linux nix taucht?

calopus

  • Guest
Dv Kamera wird am firewire Anschluss nicht erkannt
« Reply #3 on: 2010/11/15, 12:43:29 »
Hi,

also ich hab die fw Karte getauscht und schon geht es !
@ralfi Danke für den syslog Hinweis.

calopus

Offline ralfi

  • User
  • Posts: 389
Dv Kamera wird am firewire Anschluss nicht erkannt
« Reply #4 on: 2010/11/15, 14:22:08 »
Jo, kaum macht mans richtig - schon funktionierts !

 :D
Gruss, ralfi

Niveau sieht von unten oft wie Arroganz aus ...