[DE] nouveau und kernel 3.2rc4

[kris99]

Hallo Zusammen,

gestern Abend wollte ich mal eben den kernel 3.2rc4 ausprobieren. Leider bekam ich beim booten einen schwarzen Bildschirm zu sehen (out of sync), die letzte Zeile die noch angezeigt wird ist folgende:
 

Code: [Select]

fb: conflicting fb hw usage nouveaufb fs VESA VGA - removing generic driver

Ich habe schon Google bemüht, aber nichts sinnvolles gefunden.

Mit dem Kernel 3.1-5.slh.2-aptosid-amd64 funktioniert es, bis auf den Mehrschirmbetrieb.

 Als Test habe ich den nouveau-Treiber geblacklisted, dann bootet das Lappi bis zum Prompt.

Hardware:

Code: [Select]

root@marvin2:/home/placzekcl/inxi[0]# ./inxi -F
System:    Host: marvin2 Kernel: 3.1-5.slh.2-aptosid-amd64 x86_64 (64 bit)
           Desktop N/A Distro: aptosid 2011-01 Γῆρας - kde-full - (201102052200)                                                                                                                  
Machine:   System: Dell product: Latitude E6520 version: 01 serial: 9SLL4Q1                                                                                                                        
           Mobo: Dell model: 0J4TFW version: A00 serial: /9SLL4Q1/CN129611460032/ Bios: Dell version: A06 date: 07/11/2011                                                                        
CPU:       Quad core Intel Core i7-2720QM CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)                                                                      
           Clock Speeds: 1: 2195.084 MHz 2: 2195.084 MHz 3: 2195.084 MHz 4: 2195.084 MHz 5: 2195.084 MHz 6: 2195.084 MHz 7: 2195.084 MHz 8: 2195.084 MHz                                          
Graphics:  Card: nVidia GF119 [Quadro NVS 4200M]                                                                                                                                                  
           X.org: 1.11.2.902 drivers: nouveau,fbdev (unloaded: vesa) tty size: 195x58 Advanced Data: N/A for root                                                                                  
Audio:     Card-1: nVidia HDMI Audio stub driver: snd_hda_intel Sound: ALSA ver: 1.0.24                                                                                                            
           Card-2: Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel                                                                                
Network:   Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k                                                                                                            
           IF: wlan0 state: down mac: 00:26:b6:bb:2e:f6                                                                                                                                            
           Card-2: Intel 82579LM Gigabit Network Connection driver: e1000e                                                                                                                        
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 5c:26:0a:4b:ec:da                                                                                                                
Drives:    HDD Total Size: 500.1GB (82.4% used) 1: /dev/sda ST9500420AS 500.1GB                                                                                                                    
Partition: ID: / size: 12G used: 9.9G (90%) fs: ext4 ID: /boot size: 130M used: 98M (80%) fs: ext2                                                                                                
Sensors:   System Temperatures: cpu: 63.0C mobo: N/A                                                                                                                                              
           Fan Speeds (in rpm): cpu: N/A                                                                                                                                                          
Info:      Processes: 255 Uptime: 9 min Memory: 1816.9/3916.4MB Client: Shell inxi: 1.7.27                                                                                                        
r

dmesg:

Code: [Select]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-rc4-amd64 (Debian 3.2~rc4-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Sun Dec 4 18:38:24 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-rc4-amd64 root=/dev/mapper/ROOT1 ro cryptopts=source=UUID=9a629182-7918-42e7-99c8-1f43c9784c40,target=ROOT1 quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
[    0.000000]  BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf22a000 (usable)
[    0.000000]  BIOS-e820: 00000000cf22a000 - 00000000cf26e000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf26e000 - 00000000cf5b7000 (usable)
[    0.000000]  BIOS-e820: 00000000cf5b7000 - 00000000cf5e7000 (reserved)
[    0.000000]  BIOS-e820: 00000000cf5e7000 - 00000000cf7e7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012e000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Latitude E6520/0J4TFW, BIOS A06 07/11/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x12e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 base 12E000000 mask FFE000000 uncachable
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f1a30] f1a30
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[    0.000000]  0000000000 - 00cf800000 page 2M
[    0.000000] kernel direct mapping tables up to cf800000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000012e000000
[    0.000000]  0100000000 - 012e000000 page 2M
[    0.000000] kernel direct mapping tables up to 12e000000 @ cf5b1000-cf5b7000
[    0.000000] RAMDISK: 36ae2000 - 37569000
[    0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000cf755018 0841A (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[    0.000000] ACPI: FACS 00000000cf7e4e40 00040
[    0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02                 00000000      00000000)
[    0.000000] ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP      TPM 00003000 INTL 20090903)
[    0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
[    0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000cf76c018 00990 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
[    0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
[    0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL      SNB  00000001 INTL 00000001)
[    0.000000] ACPI: SLIC 00000000cf775c18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
[    0.000000] ACPI: SSDT 00000000cf773018 014A0 (v01 NvdRef  NvdTabl 00001000 INTL 20090903)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000012e000000
[    0.000000] Initmem setup node 0 0000000000000000-000000012e000000
[    0.000000]   NODE_DATA [000000012dffb000 - 000000012dffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880129600000-ffff88012cffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0012e000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009a
[    0.000000]     0: 0x00000100 -> 0x000cf22a
[    0.000000]     0: 0x000cf26e -> 0x000cf5b7
[    0.000000]     0: 0x000cf7ff -> 0x000cf800
[    0.000000]     0: 0x00100000 -> 0x0012e000
[    0.000000] On node 0 totalpages: 1037566
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3917 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 830892 pages, LIFO batch:31
[    0.000000]   Normal zone: 2576 pages used for memmap
[    0.000000]   Normal zone: 185840 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cf22a000 - 00000000cf26e000
[    0.000000] PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
[    0.000000] PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
[    0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
[    0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[    0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012dc00000 s82112 r8192 d24384 u131072
[    0.000000] pcpu-alloc: s82112 r8192 d24384 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1020649
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-rc4-amd64 root=/dev/mapper/ROOT1 ro cryptopts=source=UUID=9a629182-7918-42e7-99c8-1f43c9784c40,target=ROOT1 quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4003744k/4947968k available (3314k kernel code, 797704k absent, 146520k reserved, 3411k data, 556k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:808 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2195.150 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.30 BogoMIPS (lpj=8780600)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000048] Security Framework initialized
[    0.000416] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001453] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001890] Mount-cache hash table entries: 256
[    0.002018] Initializing cgroup subsys cpuacct
[    0.002024] Initializing cgroup subsys memory
[    0.002036] Initializing cgroup subsys devices
[    0.002039] Initializing cgroup subsys freezer
[    0.002041] Initializing cgroup subsys net_cls
[    0.002043] Initializing cgroup subsys blkio
[    0.002075] CPU: Physical Processor ID: 0
[    0.002076] CPU: Processor Core ID: 0
[    0.002081] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002082] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002085] mce: CPU supports 9 MCE banks
[    0.002099] CPU0: Thermal monitoring enabled (TM1)
[    0.002109] using mwait in idle threads.
[    0.002587] ACPI: Core revision 20110623
[    0.010358] Switched APIC routing to physical flat.
[    0.010773] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050416] CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz stepping 07
[    0.155781] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.155787] ... version:                3
[    0.155789] ... bit width:              48
[    0.155790] ... generic registers:      4
[    0.155792] ... value mask:             0000ffffffffffff
[    0.155793] ... max period:             000000007fffffff
[    0.155794] ... fixed-purpose events:   3
[    0.155796] ... event mask:             000000070000000f
[    0.156044] NMI watchdog enabled, takes one hw-pmu counter.
[    0.156140] Booting Node   0, Processors  #1
[    0.156142] smpboot cpu 1: start_ip = 95000
[    0.263816] NMI watchdog enabled, takes one hw-pmu counter.
[    0.263913]  #2
[    0.263914] smpboot cpu 2: start_ip = 95000
[    0.371680] NMI watchdog enabled, takes one hw-pmu counter.
[    0.371780]  #3
[    0.371782] smpboot cpu 3: start_ip = 95000
[    0.479551] NMI watchdog enabled, takes one hw-pmu counter.
[    0.479647]  #4
[    0.479648] smpboot cpu 4: start_ip = 95000
[    0.587416] NMI watchdog enabled, takes one hw-pmu counter.
[    0.587521]  #5
[    0.587522] smpboot cpu 5: start_ip = 95000
[    0.695292] NMI watchdog enabled, takes one hw-pmu counter.
[    0.695390]  #6
[    0.695391] smpboot cpu 6: start_ip = 95000
[    0.803172] NMI watchdog enabled, takes one hw-pmu counter.
[    0.803269]  #7
[    0.803271] smpboot cpu 7: start_ip = 95000
[    0.911040] NMI watchdog enabled, takes one hw-pmu counter.
[    0.911065] Brought up 8 CPUs
[    0.911067] Total of 8 processors activated (35119.15 BogoMIPS).
[    0.916444] devtmpfs: initialized
[    0.919671] PM: Registering ACPI NVS region at cf5e7000 (2097152 bytes)
[    0.919914] print_constraints: dummy:
[    0.919981] NET: Registered protocol family 16
[    0.920075] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.920078] ACPI: bus type pci registered
[    0.920165] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.920167] PCI: not using MMCONFIG
[    0.920169] PCI: Using configuration type 1 for base access
[    0.920177] dmi type 0xB1 record - unknown flag
[    0.920796] bio: create slab <bio> at 0
[    0.920902] ACPI: Added _OSI(Module Device)
[    0.920904] ACPI: Added _OSI(Processor Device)
[    0.920906] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.920909] ACPI: Added _OSI(Processor Aggregator Device)
[    0.922277] ACPI: EC: Look up EC in DSDT
[    0.928590] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.011338] ACPI: SSDT 00000000cf5d7798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
[    1.011713] ACPI: Dynamic OEM Table Load:
[    1.011716] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
[    1.023179] ACPI: SSDT 00000000cf5d8a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
[    1.023605] ACPI: Dynamic OEM Table Load:
[    1.023608] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
[    1.034964] ACPI: SSDT 00000000cf5d6d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
[    1.035321] ACPI: Dynamic OEM Table Load:
[    1.035324] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
[    1.118789] ACPI: Interpreter enabled
[    1.118794] ACPI: (supports S0 S3 S4 S5)
[    1.118822] ACPI: Using IOAPIC for interrupt routing
[    1.118845] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.119378] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    1.822742] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[    1.822939] ACPI: No dock devices found.
[    1.822940] HEST: Table not found.
[    1.822943] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.823401] \_SB_.PCI0:_OSC invalid UUID
[    1.823403] _OSC request data:1 8 1f
[    1.823407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.824237] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]

...

[    1.827768] pci 0000:00:1c.5:   bridge window [mem 0xe6500000-0xe65fffff]
[    1.827802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.828082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.828133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.828183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.828234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.828288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.828352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.828463] \_SB_.PCI0:_OSC invalid UUID
[    1.828464] _OSC request data:1 1f 1f
[    1.828468]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.828512] \_SB_.PCI0:_OSC invalid UUID
[    1.828513] _OSC request data:1 0 1d
[    1.828517]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.828518] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.833696] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.833753] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.833808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.833868] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.833922] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.833978] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.834033] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    1.834086] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.834192] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.834197] vgaarb: loaded
[    1.834198] vgaarb: bridge control possible 0000:01:00.0
[    1.834234] PCI: Using ACPI for IRQ routing
[    1.835886] PCI: pci_cache_line_size set to 64 bytes
[    1.835988] reserve RAM buffer: 000000000009a800 - 000000000009ffff
[    1.835991] reserve RAM buffer: 00000000cf22a000 - 00000000cfffffff
[    1.835994] reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
[    1.835998] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
[    1.836000] reserve RAM buffer: 000000012e000000 - 000000012fffffff
[    1.836104] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.836109] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.838129] Switching to clocksource hpet
[    1.839993] pnp: PnP ACPI init
[    1.840005] ACPI: bus type pnp registered
[    1.840425] pnp 00:00: [bus 00-3e]
[    1.840428] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.840430] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.840432] pnp 00:00: [io  0x0d00-0xffff window]

...

[    1.854286] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[    1.854288] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
[    1.854380] NET: Registered protocol family 2
[    1.854540] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.855517] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.857189] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.857414] TCP: Hash tables configured (established 524288 bind 65536)
[    1.857416] TCP reno registered
[    1.857428] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.857450] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.857609] NET: Registered protocol family 1
[    1.857722] pci 0000:01:00.0: Boot video device
[    1.857774] PCI: CLS 64 bytes, default 64
[    1.857817] Unpacking initramfs...
[    2.090317] Freeing initrd memory: 10780k freed
[    2.091728] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.091732] Placing 64MB software IO TLB between ffff8800cb22a000 - ffff8800cf22a000
[    2.091734] software IO TLB at phys 0xcb22a000 - 0xcf22a000
[    2.091754] Simple Boot Flag at 0xf3 set to 0x1
[    2.092526] audit: initializing netlink socket (disabled)
[    2.092537] type=2000 audit(1324034609.872:1): initialized
[    2.113668] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.125453] VFS: Disk quotas dquot_6.5.2
[    2.125493] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.125575] msgmni has been set to 7840
[    2.125761] alg: No test for stdrng (krng)
[    2.125803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.125806] io scheduler noop registered
[    2.125808] io scheduler deadline registered
[    2.125835] io scheduler cfq registered (default)
[    2.125927] pcieport 0000:00:01.0: setting latency timer to 64
[    2.125953] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.126277] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[    2.126279] vesafb: scrolling: redraw
[    2.126281] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.127362] vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90005100000, using 9024k, total 9024k
[    2.262270] Console: switching to colour frame buffer device 240x75
[    2.397090] fb0: VESA VGA frame buffer device
[    2.397115] intel_idle: MWAIT substates: 0x21120
[    2.397117] intel_idle: v0.4 model 0x2A
[    2.397119] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.397189] ERST: Table is not found!
[    2.397191] GHES: HEST is not enabled!
[    2.397239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.417864] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.566148] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.613493] Linux agpgart interface v0.103
[    2.613706] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.613914] i8042: Warning: Keylock active
[    2.615148] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.615153] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.615266] mousedev: PS/2 mouse device common for all mice
[    2.615306] rtc_cmos 00:06: RTC can wake from S4
[    2.615430] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.615471] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.615776] cpuidle: using governor ladder
[    2.616093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.616390] cpuidle: using governor menu
[    2.616558] TCP cubic registered
[    2.616804] NET: Registered protocol family 10
[    2.617376] Mobile IPv6
[    2.617378] NET: Registered protocol family 17
[    2.617382] Registering the dns_resolver key type
[    2.617870] PM: Hibernation image not present or could not be loaded.
[    2.617883] registered taskstats version 1
[    2.624559] rtc_cmos 00:06: setting system clock to 2011-12-16 11:23:31 UTC (1324034611)
[    2.624610] Initializing network drop monitor service
[    2.625703] Freeing unused kernel memory: 556k freed
[    2.625763] Write protecting the kernel read-only data: 6144k
[    2.628552] Freeing unused kernel memory: 764k freed
[    2.631075] Freeing unused kernel memory: 700k freed
[    2.688791] udevd[79]: starting version 175
[    2.701696] usbcore: registered new interface driver usbfs
[    2.701725] usbcore: registered new interface driver hub
[    2.702553] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    2.702557] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    2.702602] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.702617] e1000e 0000:00:19.0: setting latency timer to 64
[    2.702746] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    2.703038] usbcore: registered new device driver usb

...

[    6.447543] USB Mass Storage support registered.
[    7.453866] scsi 6:0:0:0: Direct-Access     Generic  Flash HS-CF      4.44 PQ: 0 ANSI: 0
[    7.457465] scsi 6:0:0:1: Direct-Access     Generic  Flash HS-COMBO   4.44 PQ: 0 ANSI: 0
[    7.558409] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    7.562568] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   12.065215] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   15.993382] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   18.699560] udevd[442]: starting version 175
[   19.843467] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   19.871075] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[   19.898801] ACPI: Lid Switch [LID]
[   19.898861] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   19.898898] ACPI: Power Button [PBTN]
[   19.904283] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   19.922310] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   19.922351] ACPI: Sleep Button [SBTN]
[   19.945461] parport_pc 00:09: reported by Plug and Play ACPI
[   19.945497] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   19.946228] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[   19.946281] ACPI: Power Button [PWRF]
[   19.970243] wmi: Mapper loaded
[   20.228014] cfg80211: Calling CRDA to update world regulatory domain
[   20.292459] iTCO_vendor_support: vendor-support=0
[   20.861156] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[   20.861166] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e77c90), AE_TIME (20110623/psparse-536)
[   20.861177] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR2] (Node ffff880128e77c68), AE_TIME (20110623/psparse-536)
[   20.861185] ACPI Error: Method parse/execution failed [\ECRW] (Node ffff880128e77b00), AE_TIME (20110623/psparse-536)
[   20.861193] ACPI Error: Method parse/execution failed [\ECG9] (Node ffff880128e788a8), AE_TIME (20110623/psparse-536)
[   20.861203] ACPI Error: Method parse/execution failed [\_SB_.BAT0._BIF] (Node ffff880128e781f0), AE_TIME (20110623/psparse-536)
[   20.861254] ACPI Exception: AE_TIME, Evaluating _BIF (20110623/battery-419)
[   23.341933] WARNING! power/level is deprecated; use power/control instead
[   23.489642] Bluetooth: Core ver 2.16
[   23.489661] NET: Registered protocol family 31
[   23.489663] Bluetooth: HCI device and connection manager initialized
[   23.489666] Bluetooth: HCI socket layer initialized
[   23.489668] Bluetooth: L2CAP socket layer initialized
[   23.489673] Bluetooth: SCO socket layer initialized
[   23.520795] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   23.520952] usbcore: registered new interface driver btusb
[   23.615396] input: Wacom Bamboo 2FG Pen as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input9
[   23.620918] input: Wacom Bamboo 2FG Finger as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.1/input/input10
[   23.622786] usbcore: registered new interface driver wacom
[   23.622790] wacom: v1.53:USB Wacom tablet driver
[   23.766046] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[   23.766061] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880128e77c90), AE_TIME (20110623/psparse-536)
[   23.766075] ACPI Error: Method parse/execution failed [\ECRB] (Node ffff880128e77b28), AE_TIME (20110623/psparse-536)
[   23.766081] ACPI Error: Method parse/execution failed [\ECG5] (Node ffff880128e78a10), AE_TIME (20110623/psparse-536)
[   23.766087] ACPI Error: Method parse/execution failed [\_SB_.BAT1._STA] (Node ffff880128e78f60), AE_TIME (20110623/psparse-536)
[   23.766111] ACPI Exception: AE_ERROR, Evaluating _STA (20110623/battery-396)
[   23.839100] cfg80211: World regulatory domain updated:
[   23.839104] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.839107] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.839109] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.839112] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.839114] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.839116] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.788546] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input11
[   24.881336] ACPI: Battery Slot [BAT2] (battery absent)
[   24.897836] ACPI: AC Adapter [AC] (on-line)
[   24.916604] Linux media interface: v0.10
[   24.940860] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   25.162489] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   25.162569] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   25.162633] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   25.164507] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   25.164521] ath9k 0000:03:00.0: setting latency timer to 64
[   25.171399] input: Dell WMI hotkeys as /devices/virtual/input/input12
[   25.214798] ath: EEPROM regdomain: 0x65
[   25.214800] ath: EEPROM indicates we should expect a direct regpair map
[   25.214803] ath: Country alpha2 being used: 00
[   25.214804] ath: Regpair used: 0x65
[   25.252401] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   25.252828] Registered led device: ath9k-phy0
[   25.252835] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=17
[   25.284604] acpi device:16: registered as cooling_device8
[   25.319823] Linux video capture interface: v2.00
[   25.328488] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input13
[   25.328552] ACPI: Video Device [VID] (multi-head: yes  rom: yes  post: no)
[   25.372131] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:181c)
[   25.374262] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input14
[   25.374355] usbcore: registered new interface driver uvcvideo
[   25.374356] USB Video Class driver (1.1.1)
[   25.541149] [drm] Initialized drm 1.1.0 20060810
[   25.596694] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   25.596699] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   25.596706] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.596710] nouveau 0000:01:00.0: setting latency timer to 64
[   25.598004] [drm] nouveau 0000:01:00.0: Detected an NVd0 generation card (0x0d9160a1)
[   25.598009] checking generic (e1000000 8d0000) vs hw (d0000000 10000000)
[   25.598011] checking generic (e1000000 8d0000) vs hw (e0000000 2000000)
[   25.598013] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[   25.598033] Console: switching to colour dummy device 80x25
[   25.602657] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   25.657610] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   25.657698] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[   25.657737] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   25.658576] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   25.658579] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   25.658582] [drm] nouveau 0000:01:00.0: Bios version 75.19.17.01
[   25.658585] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   25.658587] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   25.658590] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[   25.658592] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000000
[   25.658594] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 08024382 00020010
[   25.658596] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020323a6 0f220010
[   25.658599] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02032362 00020010
[   25.658601] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 040433b6 0f220010
[   25.658603] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 04043372 00020010
[   25.658605] [drm] nouveau 0000:01:00.0: Raw DCB entry 7: 0000000e 00000000
[   25.658607] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   25.658610] [drm] nouveau 0000:01:00.0:   0: 0x00000041: type 0x41 idx 0 tag 0xff
[   25.658613] [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
[   25.658616] [drm] nouveau 0000:01:00.0:   2: 0x00001246: type 0x46 idx 2 tag 0x07
[   25.658618] [drm] nouveau 0000:01:00.0:   3: 0x00002346: type 0x46 idx 3 tag 0x08
[   25.658620] [drm] nouveau 0000:01:00.0:   4: 0x00010461: type 0x61 idx 4 tag 0x51
[   25.658625] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x72B3
[   25.692179] [drm] nouveau 0000:01:00.0: 0x72A3: i2c rd fail: -6
[   25.712082] [drm] nouveau 0000:01:00.0: 0x78BE: Condition still not met after 20ms, skipping following opcodes
[   25.712092] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x7927
[   25.718916] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8910
[   25.718918] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8911
[   25.718961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x8A02
[   25.718963] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8A67
[   25.722964] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input15
[   25.733380] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   25.733480] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   25.733576] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   25.733673] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   25.738786] [drm] nouveau 0000:01:00.0: 0x7271: Condition still not met after 20ms, skipping following opcodes
[   25.757484] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   25.757488] [drm] nouveau 0000:01:00.0: 1: core 270MHz shader 540MHz memory 405MHz timing 1
[   25.757559] [drm] nouveau 0000:01:00.0: c: core 270MHz shader 540MHz memory 405MHz voltage 850mV
[   25.760273] [TTM] Zone  kernel: Available graphics memory: 2008272 kiB.
[   25.760276] [TTM] Initializing pool allocator.
[   25.760289] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   25.763376] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   25.767788] [drm] nouveau 0000:01:00.0: skipping unsupported encoder 6/1
[   25.767813] [drm] nouveau 0000:01:00.0: skipping unsupported encoder 6/2
[   25.768162] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   25.768167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   25.768168] [drm] No driver support for vblank timestamp query.
[   26.116784] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0xe0000, bo ffff880125b24c00
[   26.116911] fbcon: nouveaufb (fb0) is primary device
[   26.117027] Console: switching to colour frame buffer device 210x65
[   26.122903] fb0: nouveaufb frame buffer device
[   26.122904] drm: registered panic notifier
[   26.122909] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   26.122940] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   26.122944] hda_intel: Disabling MSI
[   26.122970] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   26.566980] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[   26.598943] HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
[   26.630906] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[   26.647003] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   26.647202] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   26.647432] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[   27.927605] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   28.593856] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   38.064840] fuse init (API version 7.17)
[   38.758733] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   40.232158] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   40.287970] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   40.288325] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.330001] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   40.404265] RPC: Registered named UNIX socket transport module.
[   40.404268] RPC: Registered udp transport module.
[   40.404269] RPC: Registered tcp transport module.
[   40.404271] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   40.465381] FS-Cache: Loaded
[   40.496230] FS-Cache: Netfs 'nfs' registered for caching
[   40.518222] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   41.789913] wlan0: authenticate with e0:91:f5:60:57:40 (try 1)
[   41.791892] wlan0: authenticated
[   41.821711] wlan0: associate with e0:91:f5:60:57:40 (try 1)
[   41.825661] wlan0: RX AssocResp from e0:91:f5:60:57:40 (capab=0x411 status=0 aid=4)
[   41.825666] wlan0: associated
[   41.832502] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   42.758316] Loading iSCSI transport class v2.0-870.
[   42.786026] iscsi: registered transport (tcp)
[   42.881544] iscsi: registered transport (iser)
[   42.932595] iscsid (2324): /proc/2324/oom_adj is deprecated, please use /proc/2324/oom_score_adj instead.
[   44.362937] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input23
[   44.413041] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   44.413355] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   44.542688] wlan0: deauthenticating from e0:91:f5:60:57:40 by local choice (reason=3)
[   44.710801] cfg80211: Calling CRDA to update world regulatory domain
[   44.714233] cfg80211: World regulatory domain updated:
[   44.714236] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   44.714239] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   44.714241] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   44.714244] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   44.714246] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   44.714248] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   48.452389] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   48.452392] Bluetooth: BNEP filters: protocol multicast
[   48.516624] Bluetooth: RFCOMM TTY layer initialized
[   48.516629] Bluetooth: RFCOMM socket layer initialized
[   48.516630] Bluetooth: RFCOMM ver 1.11
[   50.232662] lp0: using parport0 (interrupt-driven).
[   50.372427] ppdev: user-space parallel port driver
[   52.358065] i8k: unable to get SMM BIOS version
[   52.369655] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[   52.670268] wlan0: no IPv6 routers present
[   54.060476] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[   54.060480] [Firmware Bug]: BIOS needs update for CPU frequency support
[   54.103078] [Firmware Bug]: ACPI: Invalid BIOS _PSS frequency: 0x80000000 MHz
[   54.103082] [Firmware Bug]: BIOS needs update for CPU frequency support
[   55.155533] eth0: no IPv6 routers present
[   56.310129] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  113.717148] ADDRCONF(NETDEV_UP): wlan0: link is not ready

weiter in post #2

[kris99]

Kann mir einer von Euch einen Hint geben, wie ich das zum Laufen bekomme?

Und noch eine Frage: wie aktiviere ich beim nouveau-Treiber die Mehrschirmunterstützung? Soweit ich das verstanden habe, soll nouveau auch mehrere Bildschirme ansteuern können, aber TwinView verweigert er:

Code: [Select]

[    47.978]
X.Org X Server 1.11.2.902 (1.11.3 RC 2)
Release Date: 2011-12-09
[    47.993] X Protocol Version 11, Revision 0
[    47.993] Build Operating System: Linux 3.1.0-1-amd64 x86_64 Debian
[    47.993] Current Operating System: Linux marvin2 3.2.0-rc4-amd64 #1 SMP Sun Dec 4 18:38:24 UTC 2011 x86_64
[    47.993] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-rc4-amd64 root=/dev/mapper/ROOT1 ro cryptopts=source=UUID=9a629182-7918-42e7-99c8-1f43c9784c40,target=ROOT1 quiet
[    47.993] Build Date: 10 December 2011  09:55:45PM
[    47.993] xorg-server 2:1.11.2.902-1 (Cyril Brulebois <kibi>)
[    47.993] Current version of pixman: 0.24.0
[    47.993] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    47.993] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    47.993] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 16 12:24:17 2011
[    48.016] (==) Using config file: "/etc/X11/xorg.conf"
[    48.016] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    48.066] (==) ServerLayout "Layout0"
[    48.066] (**) |-->Screen "Screen0" (0)
[    48.066] (**) |   |-->Monitor "Monitor0"
[    48.067] (**) |-->Input Device "Keyboard0"
[    48.067] (**) |-->Input Device "MX1000"
[    48.067] (**) |-->Input Device "touchpad0"
[    48.067] (**) |-->Input Device "touchpad1"
[    48.068] (**) Option "DontZap" "false"
[    48.068] (**) Option "Xinerama" "0"
[    48.068] (**) Option "AutoAddDevices" "On"
[    48.068] (**) Option "AutoEnableDevices" "On"
[    48.068] (**) Automatically adding devices
[    48.068] (**) Automatically enabling devices
[    48.103] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    48.104] Entry deleted from font path.
[    48.377] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    48.377] (==) ModulePath set to "/usr/lib/xorg/modules"
[    48.377] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    48.378] (WW) Disabling Keyboard0
[    48.378] (II) Loader magic: 0x7fa2d8d33ae0
[    48.378] (II) Module ABI versions:
[    48.378] X.Org ANSI C Emulation: 0.4
[    48.378] X.Org Video Driver: 11.0
[    48.378] X.Org XInput driver : 13.0
[    48.378] X.Org Server Extension : 6.0
[    48.378] (--) PCI:*(0:1:0:0) 10de:1056:1028:0494 rev 161, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[    48.378] (II) Open ACPI successful (/var/run/acpid.socket)
[    48.378] (II) LoadModule: "extmod"
[    48.386] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    48.397] (II) Module extmod: vendor="X.Org Foundation"
[    48.397] compiled for 1.11.2.902, module version = 1.0.0
[    48.397] Module class: X.Org Server Extension
[    48.397] ABI class: X.Org Server Extension, version 6.0
[    48.397] (II) Loading extension SELinux
[    48.397] (II) Loading extension MIT-SCREEN-SAVER
[    48.397] (II) Loading extension XFree86-VidModeExtension
[    48.397] (II) Loading extension XFree86-DGA
[    48.397] (II) Loading extension DPMS
[    48.397] (II) Loading extension XVideo
[    48.397] (II) Loading extension XVideo-MotionCompensation
[    48.397] (II) Loading extension X-Resource
[    48.397] (II) LoadModule: "dbe"
[    48.397] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    48.412] (II) Module dbe: vendor="X.Org Foundation"
[    48.412] compiled for 1.11.2.902, module version = 1.0.0
[    48.412] Module class: X.Org Server Extension
[    48.412] ABI class: X.Org Server Extension, version 6.0
[    48.412] (II) Loading extension DOUBLE-BUFFER
[    48.412] (II) LoadModule: "glx"
[    48.412] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    48.426] (II) Module glx: vendor="X.Org Foundation"
[    48.426] compiled for 1.11.2.902, module version = 1.0.0
[    48.426] ABI class: X.Org Server Extension, version 6.0
[    48.426] (==) AIGLX enabled
[    48.426] (II) Loading extension GLX
[    48.427] (II) LoadModule: "record"
[    48.427] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    48.443] (II) Module record: vendor="X.Org Foundation"
[    48.443] compiled for 1.11.2.902, module version = 1.13.0
[    48.443] Module class: X.Org Server Extension
[    48.443] ABI class: X.Org Server Extension, version 6.0
[    48.443] (II) Loading extension RECORD
[    48.443] (II) LoadModule: "dri"
[    48.443] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    48.504] (II) Module dri: vendor="X.Org Foundation"
[    48.556] compiled for 1.11.2.902, module version = 1.0.0
[    48.556] ABI class: X.Org Server Extension, version 6.0
[    48.556] (II) Loading extension XFree86-DRI
[    48.556] (II) LoadModule: "dri2"
[    48.556] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    49.467] (II) Module dri2: vendor="X.Org Foundation"
[    49.706] compiled for 1.11.2.902, module version = 1.2.0
[    49.706] ABI class: X.Org Server Extension, version 6.0
[    49.706] (II) Loading extension DRI2
[    49.706] (==) Matched nouveau as autoconfigured driver 0
[    49.706] (==) Matched nv as autoconfigured driver 1
[    49.706] (==) Matched vesa as autoconfigured driver 2
[    49.706] (==) Matched fbdev as autoconfigured driver 3
[    49.706] (==) Assigned the driver to the xf86ConfigLayout
[    49.706] (II) LoadModule: "nouveau"
[    49.713] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    49.884] (II) Module nouveau: vendor="X.Org Foundation"
[    49.884] compiled for 1.11.2.901, module version = 0.0.16
[    49.884] Module class: X.Org Video Driver
[    49.884] ABI class: X.Org Video Driver, version 11.0
[    49.884] (II) LoadModule: "nv"
[    49.886] (WW) Warning, couldn't open module nv
[    49.886] (II) UnloadModule: "nv"
[    49.886] (II) Unloading nv
[    49.886] (EE) Failed to load module "nv" (module does not exist, 0)
[    49.886] (II) LoadModule: "vesa"
[    49.886] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    49.894] (II) Module vesa: vendor="X.Org Foundation"
[    49.894] compiled for 1.11.0, module version = 2.3.0
[    49.894] Module class: X.Org Video Driver
[    49.894] ABI class: X.Org Video Driver, version 11.0
[    49.894] (II) LoadModule: "fbdev"
[    49.894] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    49.897] (II) Module fbdev: vendor="X.Org Foundation"
[    49.897] compiled for 1.11.0, module version = 0.4.2
[    49.897] ABI class: X.Org Video Driver, version 11.0
[    49.897] (II) LoadModule: "evdev"
[    49.897] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    49.910] (II) Module evdev: vendor="X.Org Foundation"
[    49.910] compiled for 1.11.0, module version = 2.6.0
[    49.910] Module class: X.Org XInput Driver
[    49.910] ABI class: X.Org XInput driver, version 13.0
[    49.910] (II) LoadModule: "wacom"
[    49.910] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    49.918] (II) Module wacom: vendor="X.Org Foundation"
[    49.918] compiled for 1.11.1.902, module version = 0.12.0
[    49.918] Module class: X.Org XInput Driver
[    49.918] ABI class: X.Org XInput driver, version 13.0
[    49.918] (II) LoadModule: "synaptics"
[    49.919] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    49.926] (II) Module synaptics: vendor="X.Org Foundation"
[    49.926] compiled for 1.11.2.902, module version = 1.5.0
[    49.926] Module class: X.Org XInput Driver
[    49.926] ABI class: X.Org XInput driver, version 13.0
[    49.926] (II) NOUVEAU driver Date:   Wed Nov 30 18:56:54 2011 +0100
[    49.926] (II) NOUVEAU driver for NVIDIA chipset families :
[    49.926] RIVA TNT        (NV04)
[    49.926] RIVA TNT2       (NV05)
[    49.926] GeForce 256     (NV10)
[    49.926] GeForce 2       (NV11, NV15)
[    49.926] GeForce 4MX     (NV17, NV18)
[    49.926] GeForce 3       (NV20)
[    49.926] GeForce 4Ti     (NV25, NV28)
[    49.926] GeForce FX      (NV3x)
[    49.926] GeForce 6       (NV4x)
[    49.926] GeForce 7       (G7x)
[    49.926] GeForce 8       (G8x)
[    49.926] GeForce GTX 200 (NVA0)
[    49.926] GeForce GTX 400 (NVC0)
[    49.926] (II) VESA: driver for VESA chipsets: vesa
[    49.926] (II) FBDEV: driver for framebuffer: fbdev
[    49.926] (++) using VT number 7

[    49.953] drmOpenDevice: node name is /dev/dri/card0
[    49.953] drmOpenDevice: open result is 8, (OK)
[    49.953] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    49.953] drmOpenDevice: node name is /dev/dri/card0
[    49.953] drmOpenDevice: open result is 8, (OK)
[    49.953] drmOpenByBusid: drmOpenMinor returns 8
[    49.953] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    49.953] (II) [drm] nouveau interface version: 0.0.16
[    49.953] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    49.953] (WW) Falling back to old probe method for vesa
[    49.953] (WW) Falling back to old probe method for fbdev
[    49.953] (II) Loading sub module "fbdevhw"
[    49.953] (II) LoadModule: "fbdevhw"
[    49.953] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    49.964] (II) Module fbdevhw: vendor="X.Org Foundation"
[    49.964] compiled for 1.11.2.902, module version = 0.0.2
[    49.964] ABI class: X.Org Video Driver, version 11.0
[    49.964] (II) Loading sub module "dri"
[    49.964] (II) LoadModule: "dri"
[    49.964] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    49.964] (II) Module dri: vendor="X.Org Foundation"
[    49.964] compiled for 1.11.2.902, module version = 1.0.0
[    49.964] ABI class: X.Org Server Extension, version 6.0
[    49.964] (II) NOUVEAU(0): Loaded DRI module
[    49.964] drmOpenDevice: node name is /dev/dri/card0
[    49.964] drmOpenDevice: open result is 9, (OK)
[    49.964] drmOpenDevice: node name is /dev/dri/card0
[    49.964] drmOpenDevice: open result is 9, (OK)
[    49.964] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    49.964] drmOpenDevice: node name is /dev/dri/card0
[    49.965] drmOpenDevice: open result is 9, (OK)
[    49.965] drmOpenByBusid: drmOpenMinor returns 9
[    49.965] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    49.965] (II) [drm] DRM interface version 1.4
[    49.965] (II) [drm] DRM open master succeeded.
[    49.965] (--) NOUVEAU(0): Chipset: "NVIDIA NVd9"
[    49.965] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    49.965] (==) NOUVEAU(0): RGB weight 888
[    49.965] (==) NOUVEAU(0): Default visual is TrueColor
[    49.965] (==) NOUVEAU(0): Using HW cursor
[    49.965] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    49.965] (==) NOUVEAU(0): Page flipping disabled: no kernel support
[    50.076] (II) NOUVEAU(0): Output LVDS-1 using monitor section Monitor0
[    50.103] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    50.111] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    50.220] (II) NOUVEAU(0): Output DP-1 has no monitor section
[    50.330] (II) NOUVEAU(0): Output DP-2 has no monitor section
[    50.438] (II) NOUVEAU(0): EDID for output LVDS-1
[    50.438] (II) NOUVEAU(0): Manufacturer: AUO  Model: 21ed  Serial#: 0
[    50.438] (II) NOUVEAU(0): Year: 2011  Week: 4
[    50.438] (II) NOUVEAU(0): EDID Version: 1.4
[    50.438] (II) NOUVEAU(0): Digital Display Input
[    50.438] (II) NOUVEAU(0): 6 bits per channel
[    50.438] (II) NOUVEAU(0): Digital interface is undefined
[    50.438] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    50.438] (II) NOUVEAU(0): Gamma: 2.20
[    50.438] (II) NOUVEAU(0): No DPMS capabilities specified
[    50.438] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4
[    50.438] (II) NOUVEAU(0): First detailed timing is preferred mode
[    50.438] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[    50.438] (II) NOUVEAU(0): redX: 0.620 redY: 0.350   greenX: 0.320 greenY: 0.600
[    50.438] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    50.438] (II) NOUVEAU(0): Manufacturer's mask: 0
[    50.438] (II) NOUVEAU(0): Supported detailed timing:
[    50.438] (II) NOUVEAU(0): clock: 142.0 MHz   Image Size:  344 x 194 mm
[    50.438] (II) NOUVEAU(0): h_active: 1920  h_sync: 1980  h_sync_end 2028 h_blank_end 2094 h_border: 0
[    50.438] (II) NOUVEAU(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1130 v_border: 0
[    50.438] (II) NOUVEAU(0): Supported detailed timing:
[    50.438] (II) NOUVEAU(0): clock: 142.0 MHz   Image Size:  344 x 194 mm
[    50.438] (II) NOUVEAU(0): h_active: 1920  h_sync: 2120  h_sync_end 2220 h_blank_end 2700 h_border: 0
[    50.438] (II) NOUVEAU(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1314 v_border: 0
[    50.438] (II) NOUVEAU(0):  VNJVC€B156HW2
[    50.438] (II) NOUVEAU(0): Unknown vendor-specific block 0
[    50.438] (II) NOUVEAU(0): EDID (in hex):
[    50.438] (II) NOUVEAU(0): 00ffffffffffff0006afed2100000000
[    50.438] (II) NOUVEAU(0): 041501049022137802e2b59e59529926
[    50.438] (II) NOUVEAU(0): 1e505400000001010101010101010101
[    50.438] (II) NOUVEAU(0): 010101010101783780ae703832403c30
[    50.438] (II) NOUVEAU(0): aa0058c21000001a7837800c7338ea40
[    50.438] (II) NOUVEAU(0): c864aa0058c21000001a000000fe0056
[    50.438] (II) NOUVEAU(0): 4e4a5643804231353648573200000000
[    50.438] (II) NOUVEAU(0): 000041219e0000000002010a202000f9
[    50.438] (II) NOUVEAU(0): EDID vendor "AUO", prod id 8685
[    50.438] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    50.438] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  142.00  1920 1980 2028 2094  1080 1090 1100 1130 +hsync -vsync (67.8 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  142.00  1920 2120 2220 2700  1080 1090 1100 1314 +hsync -vsync (52.6 kHz)
[    50.438] (II) NOUVEAU(0): Not using mode "1920x1080" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "1920x1080" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "800x600" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "640x480" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "720x400" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "640x400" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Not using mode "640x350" (hsync out of range)
[    50.438] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    50.438] (II) NOUVEAU(0): Modeline "1920x1080@60"x60.0  139.50  1920 1968 2000 2096  1080 1083 1088 1109 -hsync -vsync (66.6 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1920x1080"x40.0  142.00  1920 2120 2220 2700  1080 1090 1100 1314 +hsync -vsync (52.6 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1280x1024"x59.9  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1280x960"x59.9  101.25  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.7 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.75  1152 1216 1336 1520  864 867 871 897 -hsync +vsync (53.8 kHz)
[    50.438] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    50.465] (II) NOUVEAU(0): EDID for output VGA-1
[    50.473] (II) NOUVEAU(0): EDID for output HDMI-1
[    50.584] (II) NOUVEAU(0): EDID for output DP-1
[    50.584] (II) NOUVEAU(0): Manufacturer: DEL  Model: a017  Serial#: 811152979
[    50.584] (II) NOUVEAU(0): Year: 2007  Week: 15
[    50.584] (II) NOUVEAU(0): EDID Version: 1.3
[    50.584] (II) NOUVEAU(0): Digital Display Input
[    50.584] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52  vert.: 33
[    50.584] (II) NOUVEAU(0): Gamma: 2.20
[    50.584] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    50.584] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    50.584] (II) NOUVEAU(0): Default color space is primary color space
[    50.584] (II) NOUVEAU(0): First detailed timing is preferred mode
[    50.584] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    50.584] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    50.584] (II) NOUVEAU(0): Supported established timings:
[    50.584] (II) NOUVEAU(0): 720x400@70Hz
[    50.584] (II) NOUVEAU(0): 640x480@60Hz
[    50.584] (II) NOUVEAU(0): 640x480@75Hz
[    50.584] (II) NOUVEAU(0): 800x600@60Hz
[    50.584] (II) NOUVEAU(0): 800x600@75Hz
[    50.584] (II) NOUVEAU(0): 1024x768@60Hz
[    50.584] (II) NOUVEAU(0): 1024x768@75Hz
[    50.584] (II) NOUVEAU(0): 1280x1024@75Hz
[    50.584] (II) NOUVEAU(0): Manufacturer's mask: 0
[    50.584] (II) NOUVEAU(0): Supported standard timings:
[    50.584] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    50.584] (II) NOUVEAU(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    50.584] (II) NOUVEAU(0): #2: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    50.584] (II) NOUVEAU(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    50.584] (II) NOUVEAU(0): Supported detailed timing:
[    50.584] (II) NOUVEAU(0): clock: 154.0 MHz   Image Size:  519 x 324 mm
[    50.584] (II) NOUVEAU(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    50.584] (II) NOUVEAU(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[    50.584] (II) NOUVEAU(0): Serial No: UY54574C0Y6S
[    50.584] (II) NOUVEAU(0): Monitor name: DELL 2407WFP
[    50.584] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    50.584] (II) NOUVEAU(0): EDID (in hex):
[    50.584] (II) NOUVEAU(0): 00ffffffffffff0010ac17a053365930
[    50.584] (II) NOUVEAU(0): 0f11010380342178eeee91a3544c9926
[    50.584] (II) NOUVEAU(0): 0f5054a54b008180a940714fb3000101
[    50.584] (II) NOUVEAU(0): 010101010101283c80a070b023403020
[    50.584] (II) NOUVEAU(0): 360007442100001a000000ff00555935
[    50.584] (II) NOUVEAU(0): 34353734433059365320000000fc0044
[    50.584] (II) NOUVEAU(0): 454c4c20323430375746500a000000fd
[    50.584] (II) NOUVEAU(0): 00384c1e5311000a202020202020008d
[    50.584] (II) NOUVEAU(0): Printing probed modes for output DP-1
[    50.584] (II) NOUVEAU(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    50.584] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    50.694] (II) NOUVEAU(0): EDID for output DP-2
[    50.694] (II) NOUVEAU(0): Manufacturer: DEL  Model: a019  Serial#: 809779532
[    50.694] (II) NOUVEAU(0): Year: 2006  Week: 49
[    50.694] (II) NOUVEAU(0): EDID Version: 1.3
[    50.694] (II) NOUVEAU(0): Digital Display Input
[    50.694] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43  vert.: 27
[    50.694] (II) NOUVEAU(0): Gamma: 2.20
[    50.694] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[    50.694] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    50.694] (II) NOUVEAU(0): Default color space is primary color space
[    50.694] (II) NOUVEAU(0): First detailed timing is preferred mode
[    50.694] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    50.694] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    50.694] (II) NOUVEAU(0): Supported established timings:
[    50.694] (II) NOUVEAU(0): 720x400@70Hz
[    50.695] (II) NOUVEAU(0): 640x480@60Hz
[    50.695] (II) NOUVEAU(0): 640x480@75Hz
[    50.695] (II) NOUVEAU(0): 800x600@60Hz
[    50.695] (II) NOUVEAU(0): 800x600@75Hz
[    50.695] (II) NOUVEAU(0): 1024x768@60Hz
[    50.695] (II) NOUVEAU(0): 1024x768@75Hz
[    50.695] (II) NOUVEAU(0): 1280x1024@75Hz
[    50.695] (II) NOUVEAU(0): Manufacturer's mask: 0
[    50.695] (II) NOUVEAU(0): Supported standard timings:
[    50.695] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    50.695] (II) NOUVEAU(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    50.695] (II) NOUVEAU(0): Supported detailed timing:
[    50.695] (II) NOUVEAU(0): clock: 119.0 MHz   Image Size:  434 x 270 mm
[    50.695] (II) NOUVEAU(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    50.695] (II) NOUVEAU(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[    50.695] (II) NOUVEAU(0): Serial No: HM0646C70DAL
[    50.695] (II) NOUVEAU(0): Monitor name: DELL 2007WFP
[    50.695] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[    50.695] (II) NOUVEAU(0): EDID (in hex):
[    50.695] (II) NOUVEAU(0): 00ffffffffffff0010ac19a04c414430
[    50.695] (II) NOUVEAU(0): 31100103802b1b78eeee91a3544c9926
[    50.695] (II) NOUVEAU(0): 0f5054a54b008180714f010101010101
[    50.695] (II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
[    50.695] (II) NOUVEAU(0): 3600b20e1100001a000000ff00484d30
[    50.695] (II) NOUVEAU(0): 36343643373044414c0a000000fc0044
[    50.695] (II) NOUVEAU(0): 454c4c20323030375746500a000000fd
[    50.695] (II) NOUVEAU(0): 00384c1e530e000a202020202020005b
[    50.695] (II) NOUVEAU(0): Printing probed modes for output DP-2
[    50.695] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    50.695] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    50.695] (II) NOUVEAU(0): Output LVDS-1 disconnected
[    50.695] (II) NOUVEAU(0): Output VGA-1 disconnected
[    50.695] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    50.695] (II) NOUVEAU(0): Output DP-1 connected
[    50.695] (II) NOUVEAU(0): Output DP-2 connected
[    50.695] (II) NOUVEAU(0): Using user preference for initial modes
[    50.695] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1200
[    50.695] (II) NOUVEAU(0): Output DP-2 using initial mode 1680x1050
[    50.695] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    50.695] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0)
[    50.695] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    50.695] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    50.695] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    50.695] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    50.695] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    50.695] (**) NOUVEAU(0): Display dimensions: (340, 190) mm
[    50.695] (**) NOUVEAU(0): DPI set to (143, 160)
[    50.695] (II) Loading sub module "fb"
[    50.695] (II) LoadModule: "fb"
[    50.695] (II) Loading /usr/lib/xorg/modules/libfb.so
[    50.825] (II) Module fb: vendor="X.Org Foundation"
[    50.825] compiled for 1.11.2.902, module version = 1.0.0
[    50.825] ABI class: X.Org ANSI C Emulation, version 0.4
[    50.825] (II) Loading sub module "exa"
[    50.825] (II) LoadModule: "exa"
[    50.825] (II) Loading /usr/lib/xorg/modules/libexa.so
[    50.829] (II) Module exa: vendor="X.Org Foundation"
[    50.829] compiled for 1.11.2.902, module version = 2.5.0
[    50.829] ABI class: X.Org Video Driver, version 11.0
[    50.829] (II) Loading sub module "shadowfb"
[    50.829] (II) LoadModule: "shadowfb"
[    50.829] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    50.856] (II) Module shadowfb: vendor="X.Org Foundation"
[    50.856] compiled for 1.11.2.902, module version = 1.0.0
[    50.856] ABI class: X.Org ANSI C Emulation, version 0.4
[    50.856] (II) UnloadModule: "vesa"
[    50.856] (II) Unloading vesa
[    50.856] (II) UnloadModule: "fbdev"
[    50.856] (II) Unloading fbdev
[    50.856] (II) UnloadModule: "fbdevhw"
[    50.856] (II) Unloading fbdevhw
[    50.856] (--) Depth 24 pixmap format is 32 bpp
[    50.856] (EE) NOUVEAU(0): Error creating GPU channel: -19
[    50.856] (EE) NOUVEAU(0): Error initialising acceleration.  Falling back to NoAccel
[    50.884] (==) NOUVEAU(0): Backing store disabled
[    50.884] (==) NOUVEAU(0): Silken mouse enabled
[    50.884] (==) NOUVEAU(0): DPMS enabled
[    50.884] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    50.885] (WW) NOUVEAU(0): Option "ImageSize" is not used
[    50.885] (WW) NOUVEAU(0): Option "TwinView" is not used
[    50.885] (WW) NOUVEAU(0): Option "TwinViewXineramaInfoOrder" is not used
[    50.885] (WW) NOUVEAU(0): Option "metamodes" is not used
[    50.885] (WW) NOUVEAU(0): Option "CustomEDID" is not used
[    50.885] (WW) NOUVEAU(0): Option "ModeValidation" is not used
[    50.885] (--) RandR disabled
[    50.885] (II) Initializing built-in extension Generic Event Extension
[    50.885] (II) Initializing built-in extension SHAPE
[    50.885] (II) Initializing built-in extension MIT-SHM
[    50.885] (II) Initializing built-in extension XInputExtension
[    50.885] (II) Initializing built-in extension XTEST
[    50.885] (II) Initializing built-in extension BIG-REQUESTS
[    50.885] (II) Initializing built-in extension SYNC
[    50.885] (II) Initializing built-in extension XKEYBOARD
[    50.885] (II) Initializing built-in extension XC-MISC
[    50.885] (II) Initializing built-in extension SECURITY
[    50.885] (II) Initializing built-in extension XINERAMA
[    50.885] (II) Initializing built-in extension XFIXES
[    50.885] (II) Initializing built-in extension RENDER
[    50.885] (II) Initializing built-in extension RANDR
[    50.885] (II) Initializing built-in extension COMPOSITE
[    50.885] (II) Initializing built-in extension DAMAGE
[    50.885] (II) SELinux: Disabled on system
[    50.891] (II) AIGLX: Screen 0 is not DRI2 capable
[    50.891] (II) AIGLX: Screen 0 is not DRI capable
[    51.112] (II) AIGLX: Loaded and initialized swrast
[    51.112] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    51.116] (II) NOUVEAU(0): NVEnterVT is called.
[    51.116] (II) NOUVEAU(0): Setting screen physical size to 508 x 317
[    51.116] resize called 1920 1200
[    51.834] (II) Using input driver 'evdev' for 'MX1000'
[    51.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    51.834] (**) Option "CorePointer"
[    51.834] (**) MX1000: always reports core events

...



Gruß

Kris

[ralul]

Twinview ist wohl nur ein Keyword eines proprietären Treibers.
Mit nouveau kannst du das tool xrandr benutzen um zwei Bildschirme einzurichten.

[kris99]

Twinview ist wohl nur ein Keyword eines proprietären Treibers.
Mit nouveau kannst du das tool xrandr benutzen um zwei Bildschirme einzurichten.

:oops:

Das macht's klarer! Danke! Nun weiß ich wenigstens schonmal wonach ich suchen muß.

[devil]

http://manual.aptosid.com/de/hw-dev-mon-de.htm