I am trying to add a second monitor to my system. I already have a Fujitsu P23T-6 1920x1080 and now I try to add a Philips Brilliande 200p LCD 1600x1200.
The system boots and use both displays, but the highest resolution available for the Philips monitor is 1024x768. I've tried to boot with only the Philips monitor attaches, but it still use only 1024x768.
/home/effo> xrandr
Screen 0: minimum 320 x 200, current 2944 x 1080, maximum 16384 x 16384
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.00*
800x600 60.32 56.25
848x480 60.00
640x480 59.94
DVI-0 connected primary 1920x1080+1024+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1680x1050 59.88
1280x1024 75.02 60.02
1440x900 59.90
1024x768 75.08 60.00
800x600 75.00 60.32
640x480 75.00 60.00
720x400 70.08
/home/effo> lspci | grep -i vga
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660D]
/home/effo>
I believe the radeon driver is in use, as I see this in Xorg.0.log
[ 4.697] (II) RADEON(0): Printing probed modes for output VGA-0
[ 4.697] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.697] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.697] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.697] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 4.697] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
Any ideas?