Siduction Forum > Installation - Support

[DE] Installer defekt?

(1/5) > >>

sidlooser:
Hallo,
versuche gerade, auf diese Maschine
--- Code: ---System:
  Host: siduction Kernel: 4.16.8-towo.1-siduction-amd64 x86_64 bits: 64
  compiler: gcc v: 7.3.0 Desktop: Cinnamon 3.6.7
  Distro: Debian GNU/Linux buster/sid
Machine:
  Type: Desktop Mobo: ASUSTeK model: P8Z77-M v: Rev 1.xx serial: <filter>
  UEFI: American Megatrends v: 2203 date: 12/18/2015
CPU:
  Topology: Quad Core model: Intel Core i5-3570 bits: 64 type: MCP
  arch: Ivy Bridge rev: 9 L2 cache: 6144 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 27281
  Speed: 1605 MHz min/max: 1600/3800 MHz Core speeds (MHz): 1: 1605 2: 1605
  3: 1605 4: 1606
Graphics:
  Card-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics driver: i915
  v: kernel bus ID: 00:02.0
  Display: x11 server: X.Org 1.19.6 driver: modesetting unloaded: fbdev,vesa
  resolution: 1920x1200~60Hz
  OpenGL: renderer: Mesa DRI Intel Ivybridge Desktop v: 4.2 Mesa 18.0.3
  direct render: Yes
Audio:
  Card-1: Intel 7 Series/C216 Family High Definition Audio
  driver: snd_hda_intel v: kernel bus ID: 00:1b.0
  Card-2: Logitech Webcam C270 type: USB driver: uvcvideo,snd-usb-audio
  bus ID: 2:3
  Card-3: Focusrite-Novation type: USB driver: snd-usb-audio bus ID: 2:6
  Sound Server: ALSA v: k4.16.8-towo.1-siduction-amd64
Network:
  Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  driver: r8169 v: 2.3LK-NAPI port: e000 bus ID: 03:00.0
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  HDD Total Size: 1.82 TiB used: 1.01 TiB (55.4%)
  ID-1: /dev/sda vendor: Western Digital model: WD20EZRZ-00Z5HB0
  size: 1.82 TiB temp: 42 C
  ID-2: /dev/sdb type: USB vendor: Intenso model: Rainbow size: 3.77 GiB
  ID-3: /dev/sdc type: USB vendor: Intenso model: Rainbow size: 1.88 GiB
Partition:
  ID-1: / size: 13.93 GiB used: 37.5 MiB (0.3%) fs: overlay dev: ERR-102
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C
  Fan Speeds (RPM): cpu: 0
Info:
  Processes: 208 Uptime: 1h 08m Memory: 15.48 GiB used: 1.49 GiB (9.6%)
  Init: systemd runlevel: 5 Compilers: gcc: 7.3.0 Shell: bash v: 4.4.19
  inxi: 3.0.09
--- End code ---

mittels siduction-18.3.0-patience-cinnamon-amd64-201805132102.iso vom USB-Stick ein System aufzuspielen.Installer hängt sich bei 36% "Remove some fll leftovers - that's what the fll-Installer would do" auf, hab nach 'ner Stunde abgebrochen.

Wie kann ich den zum Weiterarbeiten überreden?

piper:
Please visit us on Irc, either agaida, devil, or myself will build you a new iso, that one is kinda old ;)

devil:
We have kind of an autobuild system in place as of lately. Visit https://isobuilds.siduction.org/ and pick your poison.

sidlooser:
@devil: thanks - I'll try that.
@piper: btw: my HW is even way older  ;) .

sidlooser:
der neue Installer ist nicht besser, hab nach 'ner halben Stunde bei 36% aufgegeben.
same thing with this new installer, I stopped this after waiting for half an hour at 36%
In case someone is wondering what the HDD looks like (parted -l):
--- Code: ---Model: ATA WDC WD20EZRZ-00Z (scsi)
Disk /dev/sda: 2000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system     Name                  Flags
 1      1049kB  211MB   210MB   fat32           EFI System Partition  boot, esp
 2      211MB   70,0GB  69,8GB  ext4
 3      70,0GB  95,8GB  25,8GB  linux-swap(v1)
 4      95,8GB  2000GB  1905GB  ext4

--- End code ---

which looks ok for me in this UEFI environment.

Sidenote: why are codeblocks not closed here in this forum?

Navigation

[0] Message Index

[#] Next page