I can't use an external monitor with my laptop. Here is some info about the system:
# inxi -v5
System:
Host: ASUS Kernel: 5.18.0-rc6-siduction-amd64 arch: x86_64 bits: 64
compiler: gcc v: 12.1.0 Desktop: KDE Plasma v: 5.24.5
Distro: siduction 21.3.0 Wintersky - kde - (202112231751)
base: Debian GNU/Linux bookworm/sid
Machine:
Type: Laptop System: ASUSTeK product: ASUS TUF Gaming F15 FX507ZM_FX507ZM
v: 1.0 serial: N1NRCX10D15304F
Mobo: ASUSTeK model: FX507ZM v: 1.0 serial: N103NRCX00NB4EMB
UEFI: American Megatrends LLC. v: FX507ZM.313 date: 04/11/2022
Battery:
ID-1: BAT1 charge: 91.6 Wh (100.0%) condition: 91.6/90.2 Wh (101.6%)
volts: 17.4 min: 15.9 model: ASUS A32-K55 status: full
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331
charge: 55% (should be ignored) status: discharging
Memory:
RAM: total: 15.26 GiB used: 4.2 GiB (27.5%)
Array-1: capacity: 64 GiB slots: 2 EC: None max-module-size: 32 GiB
note: est.
Device-1: Controller0-ChannelA-DIMM0 type: N/A size: 8 GiB
speed: 4800 MT/s
Device-2: Controller1-ChannelA-DIMM0 type: N/A size: 8 GiB
speed: 4800 MT/s
CPU:
Info: 14-core (6-mt/8-st) model: 12th Gen Intel Core i7-12700H bits: 64
type: MST AMCP arch: Alder Lake rev: 3 cache: L1: 1.2 MiB L2: 11.5 MiB
L3: 24 MiB
Speed (MHz): avg: 728 high: 1012 min/max: 400/4679:4700:3500 cores:
1: 469 2: 688 3: 785 4: 716 5: 805 6: 636 7: 890 8: 712 9: 757 10: 923
11: 441 12: 807 13: 725 14: 677 15: 670 16: 722 17: 1012 18: 707 19: 707
20: 720 bogomips: 107520
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel Alder Lake-P Integrated Graphics vendor: ASUSTeK
driver: i915 v: kernel bus-ID: 0000:00:02.0
Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: ASUSTeK
driver: N/A arch: Ampere bus-ID: 0000:01:00.0
Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
bus-ID: 3-7:3
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 14.0.3 256 bits) v: 4.5 Mesa 22.0.3
direct render: Yes
Audio:
Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 0000:00:1f.3
Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 0000:01:00.1
Device-3: ASUSTek C-Media Audio type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-9:4
Sound Server-1: ALSA v: k5.18.0-rc6-siduction-amd64 running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.51 running: yes
Network:
Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3
IF: wlan0 state: up mac: a0:e7:0b:c6:3d:0b
Device-2: Intel Ethernet I219-LM vendor: ASUSTeK driver: e1000e v: kernel
port: N/A bus-ID: 0000:00:1f.6
IF: eno2 state: down mac: 50:eb:f6:c1:ac:1d
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 3-10:5
Report: hciconfig ID: hci0 rfk-id: 1 state: down
bt-service: enabled,running rfk-block: hardware: no software: no
address: 00:00:00:00:00:00
RAID:
Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
v: 0.6 bus-ID: 0000:00:0e.0
Drives:
Local Storage: total: 1.05 TiB used: 87.7 GiB (8.2%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLQ1T0HBLB-00B00
size: 953.87 GiB temp: 45.9 C
ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT
size: 119.51 GiB
Message: No optical or floppy data found.
Partition:
ID-1: / size: 410.43 GiB used: 87.7 GiB (21.4%) fs: ext4
dev: /dev/nvme0n1p8 label: N/A uuid: b42995c5-eb7e-44c5-95cc-5b2b11987739
ID-2: /boot/efi size: 798.4 MiB used: 284 KiB (0.0%) fs: vfat
dev: /dev/nvme0n1p7 label: N/A uuid: 6885-83E4
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 57.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2700
Info:
Processes: 408 Uptime: 4m Init: systemd runlevel: 5 Compilers: gcc: 11.3.0
Packages: 3710 Shell: Bash v: 5.1.16 inxi: 3.3.16
Here is the graphics info only:
# inxi -G
Graphics:
Device-1: Intel Alder Lake-P Integrated Graphics driver: i915 v: kernel
Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] driver: N/A
Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
OpenGL: renderer: llvmpipe (LLVM 14.0.3 256 bits) v: 4.5 Mesa 22.0.3
The second monitor is connected with and HDMI cable, but it is not detected:
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 60.00*+ 59.97 59.96 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
KDE's systemsettings also does not show it.
It does work (same cable and all) when I run Windows, so I assume it is not a hardware problem.
Any suggestions?