Siduction Forum
Siduction Forum => Software - Support => Topic started by: sidemmc on 2017/04/19, 22:42:40
-
Hi there,
just one simple question for towo-kernel-experts:
Are device trees in Towo's kernels defined in a way to not only detect
one primary mmc0 device, but an additional available secondary mmc1 device, too, please ?
nur eine einfache Frage an towo-kernel-Experten:
Sind die device trees in Towo's kernels so definiert, dass nicht nur ein
erstes mmc0 device erkannt wird, sondern auch ein zusätzlich vorhandenes zweites
mmc1 device, bitte ?
Background: patience does not detect the SD-card slot of my acer-TMB-116M,
which has an embedded MMC (= mmc0 = mmcblk0..p1..) as "HDD"; patience only detects
the eMMC as mmc0. The SD slot should be detected as mmc1.
Hintergrund: patience erkennt nicht den SD-Karten slot meines acer-TMB-116M, das eine embedded
MMC (= mmc0 = mmcblk0..p1..) als "HDD" hat. Patience erkennt nur die eMMC als mmc0.
Der SD slot sollte als mmc1 erkannt werden.
(debian-sid detects both, checked with: cat /sys/kernel/debug/mmc0...or mmc1.../ios)
Grüße, sidemmc
-
:) :P Will der reader mal nicht lesen, nicht verzagen, towo fragen. Bald ist dann ein Kernel da, alles tut, HIpp-Hipp-Hurra !
Resolved, works fine with 4.12.2-towo2 ! Thanks a lot, towo !
Grüße von sidemmc