root@siductionbox:/home/deka# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.11.10-towo.1-siduction-amd64 root=UUID=071347aa-89b4-4e9a-b1fe-a0892eafa410 ro acpi_osi=Linux
root@siductionbox:/home/deka# parted -l
Model: ATA ST9750420AS (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 8704MB 8703MB primary linux-swap(v1) boot
2 8705MB 30,2GB 21,5GB primary ext4
3 30,2GB 73,4GB 43,2GB primary ext4
4 73,4GB 750GB 677GB primary ext4
Model: ATA MTFDDAK256MAY-1A (scsi)
Disk /dev/sdb: 256GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 21,5GB 21,5GB primary ext4 boot
2 21,5GB 256GB 235GB primary ext4
Model: ATA TOSHIBA THNSNH12 (scsi)
Disk /dev/sdc: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 16,8GB 16,8GB primary ext4 boot
2 16,8GB 128GB 111GB primary ext4
root@siductionbox:/home/deka# blkid -c /dev/null -o list
device fs_type label mount point UUID
-------------------------------------------------------------------------------
/dev/sdb1 ext4 (not mounted) 9afeb28d-1d20-4b13-a934-c15d80dfc067
/dev/sdb2 ext4 (not mounted) bb7e2b35-1680-4512-81af-de119bf1bf6d
/dev/sdc1 ext4 / 071347aa-89b4-4e9a-b1fe-a0892eafa410
/dev/sdc2 ext4 /home /home 66aefc3a-400d-430c-9b87-bf601775de41
/dev/sda1 swap (not mounted) 02b2c773-71d0-4f18-9512-cd0967d1bda0
/dev/sda2 ext4 (not mounted) 256ff70a-fa2a-4dbc-a91c-edc8cb7127f4
/dev/sda3 ext4 (not mounted) 9bbfc8d5-7ee9-4af1-bc97-68a5a3ed406c
/dev/sda4 ext4 Daten /media/Daten c11504e8-e305-4f3a-91ba-d8fed1082bfe
Die Installation des Kernels läuft bis 61 bzw. 71% einwandfrei und dann dauert es gefühlt 5 Minuten bis die einzelnen Partitionen gefunden werden und dann weiter läuft.