Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic:  Calamares stuck at 93%  (Read 8718 times)

Offline bernhard

  • User
  • Posts: 17
Re: Calamares stuck at 93%
« Reply #15 on: 2018/03/08, 19:36:34 »
start das Ding einfach mal aus dem Terminal mit
Code: [Select]
sudo calamares -dd

ist mit
Code: [Select]
-dd so viel mehr zu sehen als mit
Code: [Select]
sudo calamares -d den hab' ich doch schon beigelegt.

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
Re: Calamares stuck at 93%
« Reply #16 on: 2018/03/08, 23:03:56 »
Wenn logs, dann wenigstens vollständig - mit den 2 und noch dazu unvollständigen 2 Zeilen kann wirklich kein Mensch was anfangen

upps dateianhänge übersehen
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
Re: Calamares stuck at 93%
« Reply #17 on: 2018/03/08, 23:26:05 »
Aua - was ist jetzt das: 21:33:26 [1]: Standard paths ("/mnt/endless/home/bernhard", "/usr/bin", "/usr/share/locale")

oder genauer: WzT ist /mnt/endless ?
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)

Offline bernhard

  • User
  • Posts: 17
Re: Calamares stuck at 93%
« Reply #18 on: 2018/03/09, 09:35:08 »
oder genauer: WzT ist /mnt/endless ?
ich habe unter /mnt/endless die eingebaute SSD bzw. von dort die Partition /dev/sda3 gemountet. Ich hatte keine Lust schon wieder nach der unfertigen Installation die Logdatei zu vergessen, also habe ich sie dort abgespeichert.

steht übrigens ein paar Zeilen darüber:
21:26:08 [1]: "/dev/sda3 /mnt/endless ext4 rw,relatime,data=ordered 0 0"

wenn das den Installer durcheinanderbringt, so dass er Grub nicht mehr installieren kann, weil es in diesem Filesystem auch die Pfade "/usr/bin", "/usr/share/locale" gibt, dann ist er ein wenig verbesserungswürdig.
« Last Edit: 2018/03/11, 12:49:30 by bernhard »

Offline bernhard

  • User
  • Posts: 17
Re: Calamares stuck at 93%
« Reply #19 on: 2018/03/13, 09:43:08 »
in the meantime I succeeded in making the stick bootable by installing refind (http://www.rodsbooks.com/refind/), which is also available in the siduction repos. I installed it on a different (legacy BIOS) siduction installation, but I guess that it should be possible to install refind from the repo when booted from the Installation medium (or ram). It finds (among other stuff) the siduction installation and is able to boot it via grub2, which is apparently correctly configured.

I am still wondering, what else is not completely configured since I terminated the installer at 94%.

Edit: As far as I can see (comparing my log and melmakers log) the only differences are efi bootloader and efi fallback firmware ...
« Last Edit: 2018/03/13, 14:22:10 by bernhard »