Siduction Forum
Siduction Forum => Upgrade Warnings => Topic started by: ruckus1 on 2023/02/27, 22:32:54
-
Hello Folks, 20 year Linux user, and I can't for the life of me get firewalld to work:
sudo systemctl status firewalld
[sudo] password for me:
○ firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/lib/systemd/system/firewalld.service; enabled; preset: en>
Active: inactive (dead) since Mon 2023-02-27 14:14:23 MST; 1min 43s ago
Duration: 327ms
Docs: man:firewalld(1)
Process: 66527 ExecStart=/usr/sbin/firewalld --nofork --nopid (code=exited,>
Main PID: 66527 (code=exited, status=0/SUCCESS)
CPU: 326ms
Feb 27 14:14:23 me-82b5 systemd[1]: Started firewalld.service - firewalld - dyn>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: 'python-nftables' failed: inte>
JSON blob:
{"nftables": [{"metainfo": {"json_sch>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: Failed to load user configurat>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: 'python-nftables' failed: inte>
JSON blob:
{"nftables": [{"metainfo": {"json_sch>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: COMMAND_FAILED: 'python-nftabl>
I've spent a good number of hours trying to make it run, but no joy....
Current settings:
systemctl status ufw firewalld
○ ufw.service - Uncomplicated firewall
Loaded: loaded (/lib/systemd/system/ufw.service; enabled; preset: enabled)
Active: inactive (dead) since Mon 2023-02-27 14:31:10 MST; 5s ago
Duration: 35min 3.003s
Docs: man:ufw(8)
Process: 111566 ExecStop=/lib/ufw/ufw-init stop (code=exited, status=0/SUCC>
Main PID: 998 (code=exited, status=0/SUCCESS)
CPU: 1ms
Warning: some journal files were not opened due to insufficient permissions.
○ firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/lib/systemd/system/firewalld.service; enabled; preset: en>
Active: inactive (dead) since Mon 2023-02-27 14:14:23 MST; 16min ago
Duration: 327ms
Docs: man:firewalld(1)
Main PID: 66527 (code=exited, status=0/SUCCESS)
CPU: 326ms
lines 1-18/18 (END)
-
Your running both UFW and Firewalld?
Try
ufw enable
It will likely fail but might tell you why. I can't help much with firewalld. Never used it.
-
UFW works ok and starts, but I want firewalld, I've just grown a custom to it over the years.
I was hoping that someone had some insight on this. This is the the only Debian system firewalld chokes on.
Thank You eriefisher for the assist
-
It might be good to get more of the error lines, like
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: Failed to load user configurat>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: 'python-nftables' failed: inte>
It could give a better idea what might be going wrong.
-
python-nftables
does not exist in debian unstable
-
python3-nftables
I assume?
-
python-nftables
does not exist in debian unstable
Good to know, I'll have to find a testing solution if possible.
[code]apt depends python3-nftables
python3-nftables
Depends: libnftables1 (= 1.0.6-2)
Depends: python3-jsonschema
Depends: <python3:any>
python3
[/code]
apt depends python-nftables
E: No packages found
-
It might be good to get more of the error lines, like
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: Failed to load user configurat>
Feb 27 14:14:23 me-82b5 firewalld[66527]: ERROR: 'python-nftables' failed: inte>
It could give a better idea what might be going wrong.
I've saved enough hopefully to help in a .txt
Thanks guys!
-
I also found shorewall is a no go, This is the strangest problem I've faced on Debian system....
What is the default firewall on Siduction? "I assume its iptables"
-
If I switch to a testing model:
systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/lib/systemd/system/firewalld.service; enabled; preset: en>
Active: active (running) since Thu 2023-03-02 06:41:10 MST; 46min ago
Docs: man:firewalld(1)
Main PID: 1038 (firewalld)
Tasks: 2 (limit: 9254)
Memory: 35.5M
CPU: 412ms
CGroup: /system.slice/firewalld.service
└─1038 /usr/bin/python3 /usr/sbin/firewalld --nofork --nopid
and
apt policy firewalld
firewalld:
Installed: 1.3.0-1
Candidate: 1.3.0-1
Version table:
*** 1.3.0-1 990
990 http://deb.debian.org/debian testing/main amd64 Packages
500 https://deb.kaisenlinux.org kaisen-rolling/main amd64 Packages
100 /var/lib/dpkg/status
1.3.0-1~bpo11+1 100
100 http://deb.debian.org/debian bullseye-backports/main amd64 Packages
deps
apt depends firewalld
firewalld
Depends: dbus
Depends: gir1.2-glib-2.0
Depends: gir1.2-nm-1.0
|Depends: polkitd
Depends: policykit-1
Depends: python3-dbus
Depends: python3-gi
Depends: python3-nftables (>= 0.9.3-2~)
Depends: python3-firewall (= 1.3.0-1)
Depends: <python3:any>
python3
Recommends: ipset
Recommends: iptables
Recommends: python3-cap-ng
I'll take it as firewalls are not so important here.
It's a pitty, I had such motivation for this OS's
Thanks for the efforts though.
-
Perhaps this would be relevant for you?
https://wiki.debian.org/nftables
-
Perhaps this would be relevant for you?
https://wiki.debian.org/nftables
Thanks Pip, I should have mentioned I spent a day or two on that link before posting here.
I'm going to do something that will make everyone cringe, as a last effort.
I'll report any relevant findings.
-
This has to do with this Distro IE:
systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/lib/systemd/system/firewalld.service; enabled; preset: en>
Active: active (running) since Fri 2023-03-03 07:40:23 MST; 44s ago
Docs: man:firewalld(1)
Main PID: 62899 (firewalld)
Tasks: 2 (limit: 9330)
Memory: 25.6M
CPU: 260ms
CGroup: /system.slice/firewalld.service
└─62899 /usr/bin/python3 /usr/sbin/firewalld --nofork --nopid
Mar 03 07:40:22 debian-unstable systemd[1]: Starting firewalld.service - firewa>
Mar 03 07:40:23 debian-unstable systemd[1]: Started firewalld.service - firewal>