Siduction Forum > Upgrade Warnings
nach DU nur Fluxbox
bevo:
Nach dem letzten DU vor zwei Tagen Start nur in Fluxbox möglich, über Exit und Startx kann ich zu KDE wechseln.
Was noch merkwürdig ist, dass Neustart und Herunterfahren nicht mehr verfügbar ist sondern nur Abmelden.
Wie kann ich das wieder korrigieren?
bevo
devil:
kannst du mal genauer beschreiben was beim booten passiert?
greetz
devil
bevo:
ok, Grub2 screen, dann die üblichen Zeilen. Ziemlich am Schluß startet KDM (soweit sieht alles wie gehabt aus), umschalten mit kurzzeitig blackscreen und dann fluxbox statt KDE. Unter "Fenstermanager" steht nur fb zur Verfügung.
Über Exit komme ich dann raus und starte X.
bevo
Bringt mich evtl. die Anleitung > Fenstermanager im Handbuch weiter?
devil:
ich würde mal testhalber .kde verschieben und schaun obs dann startet.
wenn nicht, kann auch ein testuser weitere klarheit bringen
auch die ausgabe von df -h ist interessant
greetz
devil
bevo:
.kde verschieben = negative
--- Code: ---bevo@bevoaptosid1:~$ df -h
Dateisystem Size Used Avail Use% Eingehängt auf
/dev/sda5 22G 7,3G 13G 36% /
tmpfs 1,9G 8,0K 1,9G 1% /lib/init/rw
udev 1,8G 180K 1,8G 1% /dev
tmpfs 1,9G 4,0K 1,9G 1% /dev/shm
/dev/sda6 65G 34G 29G 55% /home
/dev/sda1 19G 4,6G 15G 25% /media/disk1part1
/dev/sda7 97G 71G 22G 77% /media/disk1part7
/dev/sda8 27G 21G 5,3G 80% /media/disk1part8
--- End code ---
vielleicht ist das ein Hinweis, Auszug aus kdm.log:
--- Code: ---X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux bevoaptosid1 2.6.37-0.slh.23-aptosid-amd64 #1 SMP PREEMPT Sat Feb 12 13:08:54 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-0.slh.23-aptosid-amd64 root=UUID=01956b4d-6611-47cd-947e-b5d35c38e32d ro vga=795 quiet
Build Date: 05 February 2011 12:02:52PM
xorg-server 2:1.9.4-1 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.21.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 16 15:28:44 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
6 XSELINUXs still allocated at reset
SCREEN: 0 objects of 232 bytes = 0 total bytes 0 private allocs
DEVICE: 0 objects of 32 bytes = 0 total bytes 0 private allocs
CLIENT: 0 objects of 200 bytes = 0 total bytes 0 private allocs
WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
PIXMAP: 2 objects of 136 bytes = 272 total bytes 0 private allocs
GC: 0 objects of 72 bytes = 0 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
CURSOR_BITS: 1 objects of 8 bytes = 8 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 4 objects, 288 bytes, 0 allocs
2 SELECTIONs still allocated at reset
WINDOW: 0 objects of 64 bytes = 0 total bytes 0 private allocs
PIXMAP: 2 objects of 136 bytes = 272 total bytes 0 private allocs
GC: 0 objects of 72 bytes = 0 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
CURSOR_BITS: 1 objects of 8 bytes = 8 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 4 objects, 288 bytes, 0 allocs
2 PIXMAPs still allocated at reset
PIXMAP: 2 objects of 136 bytes = 272 total bytes 0 private allocs
GC: 0 objects of 72 bytes = 0 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
CURSOR_BITS: 1 objects of 8 bytes = 8 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 4 objects, 288 bytes, 0 allocs
1 CURSORs still allocated at reset
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
CURSOR_BITS: 1 objects of 8 bytes = 8 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 2 objects, 16 bytes, 0 allocs
1 CURSOR_BITSs still allocated at reset
CURSOR_BITS: 1 objects of 8 bytes = 8 total bytes 0 private allocs
DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 PICTUREs still allocated at reset
TOTAL: 0 objects, 0 bytes, 0 allocs
Unable to retrieve master
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
--- End code ---
bevo
Navigation
[0] Message Index
[#] Next page
Go to full version