Welcome, Guest. Please login or register.
Did you miss your activation email?

Recent Posts

Pages: [1] 2 3 ... 10
1
Hardware Support (EN) / Re: External Monitor
« Last post by edlin on Yesterday at 10:29:05 »
Ich lese:
Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] driver: N/A
Welchen Treiber hast du installiert? Hast du den Bereich zu Nvidia im Handbuch gelesen und angewendet?
Die Hardware wird ja erkannt, aber wohl kein geeigneter Treiber gefunden.

edlin

Reading:
Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] driver: N/A.
Which driver do you have installed? Did you read and apply the Nvidia section in the manual?
The hardware is recognised, but no suitable driver is found.

edlin
2
Hardware Support (EN) / External Monitor
« Last post by finotti on Yesterday at 03:38:13 »
I can't use an external monitor with my laptop.  Here is some info about the system:

Code: [Select]
# inxi -v5
System:
  Host: ASUS Kernel: 5.18.0-rc6-siduction-amd64 arch: x86_64 bits: 64
    compiler: gcc v: 12.1.0 Desktop: KDE Plasma v: 5.24.5
    Distro: siduction 21.3.0 Wintersky - kde - (202112231751)
    base: Debian GNU/Linux bookworm/sid
Machine:
  Type: Laptop System: ASUSTeK product: ASUS TUF Gaming F15 FX507ZM_FX507ZM
    v: 1.0 serial: N1NRCX10D15304F
  Mobo: ASUSTeK model: FX507ZM v: 1.0 serial: N103NRCX00NB4EMB
    UEFI: American Megatrends LLC. v: FX507ZM.313 date: 04/11/2022
Battery:
  ID-1: BAT1 charge: 91.6 Wh (100.0%) condition: 91.6/90.2 Wh (101.6%)
    volts: 17.4 min: 15.9 model: ASUS A32-K55 status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331
    charge: 55% (should be ignored) status: discharging
Memory:
  RAM: total: 15.26 GiB used: 4.2 GiB (27.5%)
  Array-1: capacity: 64 GiB slots: 2 EC: None max-module-size: 32 GiB
    note: est.
  Device-1: Controller0-ChannelA-DIMM0 type: N/A size: 8 GiB
    speed: 4800 MT/s
  Device-2: Controller1-ChannelA-DIMM0 type: N/A size: 8 GiB
    speed: 4800 MT/s
CPU:
  Info: 14-core (6-mt/8-st) model: 12th Gen Intel Core i7-12700H bits: 64
    type: MST AMCP arch: Alder Lake rev: 3 cache: L1: 1.2 MiB L2: 11.5 MiB
    L3: 24 MiB
  Speed (MHz): avg: 728 high: 1012 min/max: 400/4679:4700:3500 cores:
    1: 469 2: 688 3: 785 4: 716 5: 805 6: 636 7: 890 8: 712 9: 757 10: 923
    11: 441 12: 807 13: 725 14: 677 15: 670 16: 722 17: 1012 18: 707 19: 707
    20: 720 bogomips: 107520
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel Alder Lake-P Integrated Graphics vendor: ASUSTeK
    driver: i915 v: kernel bus-ID: 0000:00:02.0
  Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: ASUSTeK
    driver: N/A arch: Ampere bus-ID: 0000:01:00.0
  Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
    bus-ID: 3-7:3
  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
  OpenGL: renderer: llvmpipe (LLVM 14.0.3 256 bits) v: 4.5 Mesa 22.0.3
    direct render: Yes
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel bus-ID: 0000:00:1f.3
  Device-2: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel
    bus-ID: 0000:01:00.1
  Device-3: ASUSTek C-Media Audio type: USB
    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-9:4
  Sound Server-1: ALSA v: k5.18.0-rc6-siduction-amd64 running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.51 running: yes
Network:
  Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 0000:00:14.3
  IF: wlan0 state: up mac: a0:e7:0b:c6:3d:0b
  Device-2: Intel Ethernet I219-LM vendor: ASUSTeK driver: e1000e v: kernel
    port: N/A bus-ID: 0000:00:1f.6
  IF: eno2 state: down mac: 50:eb:f6:c1:ac:1d
Bluetooth:
  Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
    bus-ID: 3-10:5
  Report: hciconfig ID: hci0 rfk-id: 1 state: down
    bt-service: enabled,running rfk-block: hardware: no software: no
    address: 00:00:00:00:00:00
RAID:
  Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd
    v: 0.6 bus-ID: 0000:00:0e.0
Drives:
  Local Storage: total: 1.05 TiB used: 87.7 GiB (8.2%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLQ1T0HBLB-00B00
    size: 953.87 GiB temp: 45.9 C
  ID-2: /dev/sda type: USB vendor: Samsung model: Flash Drive FIT
    size: 119.51 GiB
  Message: No optical or floppy data found.
Partition:
  ID-1: / size: 410.43 GiB used: 87.7 GiB (21.4%) fs: ext4
    dev: /dev/nvme0n1p8 label: N/A uuid: b42995c5-eb7e-44c5-95cc-5b2b11987739
  ID-2: /boot/efi size: 798.4 MiB used: 284 KiB (0.0%) fs: vfat
    dev: /dev/nvme0n1p7 label: N/A uuid: 6885-83E4
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 57.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 2700
Info:
  Processes: 408 Uptime: 4m Init: systemd runlevel: 5 Compilers: gcc: 11.3.0
  Packages: 3710 Shell: Bash v: 5.1.16 inxi: 3.3.16

Here is the graphics info only:

Code: [Select]
# inxi -G
Graphics:
  Device-1: Intel Alder Lake-P Integrated Graphics driver: i915 v: kernel
  Device-2: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] driver: N/A
  Device-3: Sonix USB2.0 HD UVC WebCam type: USB driver: uvcvideo
  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
  OpenGL: renderer: llvmpipe (LLVM 14.0.3 256 bits) v: 4.5 Mesa 22.0.3

The second monitor is connected with and HDMI cable, but it is not detected:

Code: [Select]
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080     60.00*+  59.97    59.96    59.93 
   1680x1050     59.95    59.88 
   1600x1024     60.17 
   1400x1050     59.98 
   1600x900      59.99    59.94    59.95    59.82 
   1280x1024     60.02 
   1440x900      59.89 
   1400x900      59.96    59.88 
   1280x960      60.00 
   1440x810      60.00    59.97 
   1368x768      59.88    59.85 
   1360x768      59.80    59.96 
   1280x800      59.99    59.97    59.81    59.91 
   1152x864      60.00 
   1280x720      60.00    59.99    59.86    59.74 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   1024x576      59.95    59.96    59.90    59.82 
   960x600       59.93    60.00 
   960x540       59.96    59.99    59.63    59.82 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   864x486       59.92    59.57 
   800x512       60.17 
   700x525       59.98 
   800x450       59.95    59.82 
   640x512       60.02 
   720x450       59.89 
   700x450       59.96    59.88 
   640x480       60.00    59.94 
   720x405       59.51    58.99 
   684x384       59.88    59.85 
   680x384       59.80    59.96 
   640x400       59.88    59.98 
   576x432       60.06 
   640x360       59.86    59.83    59.84    59.32 
   512x384       60.00 
   512x288       60.00    59.92 
   480x270       59.63    59.82 
   400x300       60.32    56.34 
   432x243       59.92    59.57 
   320x240       60.05 
   360x202       59.51    59.13 
   320x180       59.84    59.32 
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)

KDE's systemsettings also does not show it.

It does work (same cable and all) when I run Windows, so I assume it is not a hardware problem.

Any suggestions?
3
Software-Support (DE) / Re: Flackerdesktop
« Last post by fab161 on 2022/05/26, 15:34:21 »
@towo also i915.enable_psr=0 als Bootparameter hat das Problem leider nicht behoben. Edit: Aber vorgestern hattest du mir im IRC ja intel_iommu=intgpu_off empfohlen; den habe ich anscheinend falsch eingetragen, jetzt hat das doch funktioniert.  :-[ Danke also für die Hilfe! Ich hoffe, dass das ganze jetzt endgültig gelöst ist, aber den Fehler zu reproduzieren ist wirklich nicht einfach. Leider ist er bisher immer zufällig aufgetreten. Bis jetzt sieht es aber ganz gut aus.
4
Software-Support (DE) / Re: Flackerdesktop
« Last post by fab161 on 2022/05/26, 15:20:48 »
Danke für die Antworten.

Hier die Ausgabe von inxi -Fz:

System:
  Kernel: 5.17.11-1-siduction-amd64 arch: x86_64 bits: 64 Desktop: Xfce
    v: 4.16.0 Distro: siduction 21.3.0 Wintersky - xfce - (202204081822)
Machine:
  Type: Laptop System: HP product: HP EliteBook 820 G3 v: N/A
    serial: <superuser required>
  Mobo: HP model: 807C v: KBC Version 85.61 serial: <superuser required>
    UEFI: HP v: N75 Ver. 01.05 date: 03/22/2016
Battery:
  ID-1: BAT0 charge: 0% condition: 41.0/41.0 Wh (100.0%) volts: 4.6 min: 11.4
CPU:
  Info: dual core model: Intel Core i7-6500U bits: 64 type: MT MCP cache:
    L2: 512 KiB
  Speed (MHz): avg: 690 min/max: 400/3100 cores: 1: 663 2: 700 3: 700
    4: 700
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] driver: i915 v: kernel
  Device-2: Cheng Uei Precision Industry (Foxlink) HP HD Camera type: USB
    driver: uvcvideo
  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
  OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 22.0.4
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
  Sound Server-1: ALSA v: k5.17.11-1-siduction-amd64 running: yes
  Sound Server-2: PipeWire v: 0.3.51 running: yes
Network:
  Device-1: Intel Ethernet I219-V driver: e1000e
  IF: enp0s31f6 state: down mac: <filter>
  Device-2: Intel Wireless 8260 driver: iwlwifi
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb
  Report: hciconfig ID: hci0 state: up address: <filter> bt-v: 2.1
Drives:
  Local Storage: total: 238.47 GiB used: 7.91 GiB (3.3%)
  ID-1: /dev/sda vendor: LITE-ON model: L8H-256V2G-HP size: 238.47 GiB
Partition:
  ID-1: / size: 231.26 GiB used: 7.91 GiB (3.4%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 510 MiB used: 280 KiB (0.1%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 1.95 GiB used: 0 KiB (0.0%)
    dev: /dev/sda3
Sensors:
  System Temperatures: cpu: 43.0 C pch: 42.0 C mobo: 0.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 207 Uptime: 2m Memory: 7.66 GiB used: 1.47 GiB (19.2%)
  Shell: Bash inxi: 3.3.16
5
Software-Support (DE) / Re: Flackerdesktop
« Last post by towo on 2022/05/25, 11:54:30 »
Probiere bitte mal i915.enable_psr=0 als Kernelparameter.
6
Software-Support (DE) / Re: Flackerdesktop
« Last post by dibl on 2022/05/25, 03:37:17 »
Or

Code: [Select]
inxi -Fz
We don't need to see your MAC address.
7
Software-Support (DE) / Re: Flackerdesktop
« Last post by vinzv on 2022/05/24, 21:14:31 »
Wenn du uns mal Details zu deiner Hardware verrätst, hilft das vielleicht bei der Eingrenzung der Ursache. Am besten:
Code: [Select]
inxi -F
8
Software-Support (DE) / Flackerdesktop
« Last post by fab161 on 2022/05/24, 16:50:34 »
Hallo zusammen,

nach einer frischen Siduction-Installation und anschließendem full-upgrade habe ich ein Problem: Mein Desktop flackert; nicht permanent aber von Zeit zu Zeit. Sollte das Flackern auftreten, kann ich es immer sofort abstellen, wenn ich die Maus bewege, aber irgendwie komisch ist das schon.
Mit anderen, auch sehr aktuellen Distros ist mir das nicht passiert; nicht bei Arch und nicht bei einem regulären Debian Sid. Mit dem Kernel hat es scheinbar auch nichts zu tun, es flackert unter 5.15 genauso wie unter 5.17. Übrigens ist es auch egal, ob ich Xfce oder KDE benutze: Vor ein paar Wochen war das auch schon so, nur jetzt wollte ich das Problem mal angehen.  ;)

Hier mal ein entsprechendes Video (riseup pastebin): https://share.riseup.net/#Y1NFV0rk_QAXlzI874_LxA

Notfalls könnte ich auch einfach auf Updates warten, immerhin müssten kritische Pakete ja früher oder später so oder so rausfliegen.
Weiß jemand von euch weiter?
9
@whistler_mb,
du hast das Problem gelöst.
Allerbesten Dank.
10
Software-Support (DE) / Re: LO Calc Kopf- und Fußzeilenproblem
« Last post by whistler_mb on 2022/05/23, 18:06:51 »
Wie es aussieht, ist es wohl ein Problem mit libreoffice-gtk3.

Ich habe libreoffice-qt5 und libreoffice-kf5 deinstalliert und libreoffice-gtk3 installiert. Dann kann ich den linken Bereich nicht bearbeiten.
Wenn ich das wieder rückgängig mache, dann funktioniert wieder alles.
Pages: [1] 2 3 ... 10