Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: [DE] Nach Sidu-Installation funktioniert Ethernet-Karte nicht.  (Read 7423 times)

DeKa

  • Guest
[DE] Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #15 on: 2013/10/26, 12:17:00 »
Habe nach mehrmaligen Fehlversuchen es hin bekommen mit dem Paste-Service.
Terminal musste ich beenden und nur neustarten dann klappte das auf einmal.
Hier meine neue Xorg.0.log nachdem ich versucht hatte diese auf "intel" umzustellen, was natürlich nicht klappte.
Um wieder die ausgangssituation herzustellen habe ich nur die xorg.conf von der Installation in xorg.conf.bak geändert und nach dem Neustart habe ich jetzt den Intel-Treiber am laufen, siehe hier:
http://paste.siduction.org/20131026100838
Ob das jetzt mit dem Abmelden, Neustarten, Herunterfahren und Strg+Alt+F1 klappt muss ich noch testen. Mache erst einmal ein Image.

Offline ayla

  • User
  • Posts: 1.744
Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #16 on: 2013/10/26, 12:39:26 »
Du hast immer noch "nomodeset" in der kernel command line, da kann das nicht klappen.
Nimms mal waehrend des bootens raus oder entferns in der /etc/default/grub und probier dann nochmal zu booten.

Xorg.conf bzw ...xorg.conf.d/...conf darf auch keine aktiv sein.

So wie ich das lese haette dein System zwar gerne den intel-Treiber genommen, kann aber nicht wegen "nomodeset".

Gruss
Ayla

DeKa

  • Guest
Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #17 on: 2013/10/26, 13:47:15 »
Hallo ayla,

Danke für den Tipp. Hier jetzt "OHNE" zusätzliche Einträge in Grub:
http://paste.siduction.org/20131026114515

DeKa

  • Guest
Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #18 on: 2013/10/26, 13:56:16 »
Das Problem mit der Ethernetkarte besteht weiterhin!
Wie kann ich diese Karte aktivieren?

DeKa

  • Guest
Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #19 on: 2013/10/26, 14:44:08 »
Die gepostete Dateien sind alle noch mit vesa, ich habe leider in dem durcheinander ein update-grub vergessen.

Auch hat der Eintrag von
Code: [Select]

Hab jetzt mal folgenden Befehl in die /etc/rc.local eingetragen:

Code: echo 1 > /sys/bus/pci/devices/0000:01:00.0/remove


und zudem folgendes in /etc/modprobe.d/blacklist.conf eingetragen:

Code: blacklist nouveau
hat nichts geholfen. Komme jetzt nur bis zum Anmelde-Bildschirm und nur durch nomodeset komme ich an das System.

DeKa

  • Guest
Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #20 on: 2013/10/26, 15:25:33 »
hwinfo:
Code: [Select]
root@deka-sidu:/home/deka# hwinfo | grep Driver
process 17869: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
  <6>[    3.542903] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
  Driver Info #0:
    Driver Status: thermal,fan are active
    Driver Activation Cmd: "modprobe thermal; modprobe fan"
  Driver: "pcieport"
  Driver Info #0:
    Driver Status: i915 is active
    Driver Activation Cmd: "modprobe i915"
  Driver: "xhci_hcd"
  Driver Modules: "xhci_hcd"
  Driver Info #0:
    Driver Status: xhci_hcd is active
    Driver Activation Cmd: "modprobe xhci_hcd"
  Driver: "mei_me"
  Driver Modules: "mei_me"
  Driver Info #0:
    Driver Status: mei_me is active
    Driver Activation Cmd: "modprobe mei_me"
  Driver: "ehci-pci"
  Driver Modules: "ehci_pci"
  Driver Info #0:
    Driver Status: ehci-hcd is active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Driver Info #1:
    Driver Status: ehci_pci is active
    Driver Activation Cmd: "modprobe ehci_pci"
  Driver: "snd_hda_intel"
  Driver Modules: "snd_hda_intel"
  Driver Info #0:
    Driver Status: snd_hda_intel is active
    Driver Activation Cmd: "modprobe snd_hda_intel"
  Driver: "pcieport"
  Driver: "pcieport"
  Driver: "pcieport"
  Driver: "pcieport"
  Driver: "ehci-pci"
  Driver Modules: "ehci_pci"
  Driver Info #0:
    Driver Status: ehci-hcd is active
    Driver Activation Cmd: "modprobe ehci-hcd"
  Driver Info #1:
    Driver Status: ehci_pci is active
    Driver Activation Cmd: "modprobe ehci_pci"
  Driver: "lpc_ich"
  Driver Modules: "lpc_ich"
  Driver Info #0:
    Driver Status: lpc_ich is active
    Driver Activation Cmd: "modprobe lpc_ich"
  Driver: "ahci"
  Driver Modules: "ahci"
  Driver Info #0:
    Driver Status: ahci is active
    Driver Activation Cmd: "modprobe ahci"
  Driver Info #0:
    Driver Status: i2c_i801 is active
    Driver Activation Cmd: "modprobe i2c_i801"
  Driver: "alx"
  Driver Modules: "alx"
  Driver Info #0:
    Driver Status: alx is active
    Driver Activation Cmd: "modprobe alx"
  Driver: "rtsx_pci"
  Driver Modules: "rtsx_pci"
  Driver Info #0:
    Driver Status: rtsx_pci is active
    Driver Activation Cmd: "modprobe rtsx_pci"
  Driver: "sdhci-pci"
  Driver Modules: "sdhci_pci"
  Driver Info #0:
    Driver Status: sdhci_pci is active
    Driver Activation Cmd: "modprobe sdhci_pci"
  Driver: "iwlwifi"
  Driver Modules: "iwlwifi"
  Driver Info #0:
    Driver Status: iwlwifi is active
    Driver Activation Cmd: "modprobe iwlwifi"
  Driver: "ahci", "sd"
  Driver Modules: "ahci"
  Driver: "ahci", "sd"
  Driver Modules: "ahci"
  Driver: "ahci", "sr"
  Driver Modules: "ahci"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver: "btusb"
  Driver Modules: "btusb"
  Driver Info #0:
    Driver Status: btusb is active
    Driver Activation Cmd: "modprobe btusb"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver: "hub"
  Driver Modules: "usbcore"
  Driver Info #0:
    Driver Status: usbcore is active
    Driver Activation Cmd: "modprobe usbcore"
  Driver Info #0:
  Driver Info #0:
  Driver: "iwlwifi"
  Driver Modules: "iwlwifi"
  Driver: "alx"
  Driver Modules: "alx"

DeKa

  • Guest
Re: Nach Sidu-Installation funktioniert Ethernet-Karte nicht.
« Reply #21 on: 2013/10/29, 17:54:18 »
Da die Intel-Graka nur vor der Anmeldung funktioniert und nach der Anmeldung ein Grafikproblem auftritt das die Benutzung des Notebooks unmöglich macht habe ich einen Widerruf beantragt und das Gerät zurück geschickt.

Das Problem muss hier an dem UEFI-Modus "Legacy" und der nicht abwählbaren Grafikkarte im BIOS liegen. Habe zwar die Anleitung befolgt und die Nvidia-Graka-Treiber deaktiviert, was keine Besserung brachte.
Werde mir also ein Notebook aus einem Linux-Shop kaufen.

Danken möchte ich hier noch allen sagen, die es mit mir so lange ausgehalten haben.