Siduction Forum
Siduction Forum => Siduction News => Topic started by: towo on 2012/09/12, 22:33:01
-
For the users, with no fear for experiments i have uploaded kernel 3.6-rc5 to our experimental repo.
There are no metapackages, installing per packagename only, like
apt-get install linux-image-3.6-rc5.towo.1-siduction-amd64 linux-headers-3.6-rc5.towo.1-siduction-amd64
given, you have our experimntal-repo in your sources.
-
Here is a netbook example where it seems to be functioning good (for 10 minutes):
System: Host: tosh205 Kernel: 3.6-rc5.towo.1-siduction-686-pae i686 (32 bit, gcc: 4.7.1)
Desktop: LXDE (Openbox 3.5.0) Distro: siduction 12.1 Desperado - lxde - (201205212227)
Machine: System: TOSHIBA product: TOSHIBA NB205 version: PLL20U-00201D
Mobo: TOSHIBA model: KAVAA version: 1.00 Bios: TOSHIBA version: V1.90 date: 01/15/2010
CPU: Single core Intel Atom CPU N280 (-HT-) cache: 512 KB flags: (nx sse sse2 sse3 ssse3) bmips: 3324.96
Clock Speeds: 1: 1333.00 MHz 2: 1333.00 MHz
Graphics: Card: Intel Mobile 945GSE Express Integrated Graphics Controller bus-ID: 00:02.0
X.Org: 1.12.3.902 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x600@60.0hz
GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 GLX Version: 1.4 Mesa 8.0.4 Direct Rendering: Yes
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k bus-ID: 03:00.0
IF: wlan0 state: up mac: 00:23:08:96:77:a1
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: 2000 bus-ID: 04:00.0
IF: eth0 state: down mac: 00:23:5a:fa:a0:32
Drives: HDD Total Size: 40.0GB (0.9% used) 1: model: OCZ
Info: Processes: 135 Uptime: 10 min Memory: 410.4/2012.4MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
-
Bis jetzt keine Probleme ;)
System: Host: laptop1 Kernel: 3.6-rc5.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: aptosid 2010-02 Κῆρες - kde-lite - (201009132215)
Machine: System: Hewlett-Packard product: HP 625
Mobo: Hewlett-Packard model: 1475 version: KBC Version 72.12
Bios: Hewlett-Packard version: 68DVA Ver. F.20 date: 09/15/2011
CPU: Dual core AMD Athlon II P320 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 8378.9
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series] bus-ID: 01:05.0
X.Org: 1.12.3.902 driver: radeon Resolution: 1366x768@59.6hz
GLX Renderer: Gallium 0.4 on AMD RS880 GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Network: Card-1: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: 3000 bus-ID: 02:00.0
IF: eth0 state: down mac: 1c:c1:de:b8:30:ec
Card-2: Broadcom BCM4313 802.11b/g/n Wireless LAN Controller driver: bcma-pci-bridge bus-ID: 06:00.0
IF: wlan0 state: up mac: 70:f3:95:b9:75:6c
Drives: HDD Total Size: 320.1GB (78.3% used) 1: model: Hitachi_HTS54503
Info: Processes: 145 Uptime: 6 min Memory: 680.0/5718.4MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
-
Here is another testing machine:
System: Host: delle6500 Kernel: 3.6-rc5.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1-RC1 Desperado - kde - (201205152133)
Machine: System: Dell product: Latitude E6500
Mobo: Dell model: 0PP476 Bios: Dell version: A14 date: 07/31/2009
CPU: Dual core Intel Core2 Duo CPU P8600 (-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 9576.08
Clock Speeds: 1: 2401.00 MHz 2: 2401.00 MHz
Graphics: Card: NVIDIA G98M [Quadro NVS 160M] bus-ID: 01:00.0 X.Org: 1.12.3.902 driver: nvidia Resolution: 1920x1200@60.0hz
GLX Renderer: Quadro NVS 160M/PCIe/SSE2 GLX Version: 3.3.0 NVIDIA 304.48 Direct Rendering: Yes
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge bus-ID: 0c:00.0
IF: wlan0 state: up mac: 00:23:4e:ab:86:7a
Card-2: Intel 82567LM Gigabit Network Connection driver: e1000e ver: 2.0.0-k port: efe0 bus-ID: 00:19.0
IF: eth1 state: down mac: 00:21:70:d4:d3:04
Drives: HDD Total Size: 120.0GB (35.8% used) 1: model: OCZ_VERTEX
Info: Processes: 191 Uptime: 51 min Memory: 1077.2/1997.1MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
This one has a Win XP VM, and VMware Player 5.0. It was a happy surprise to see the VMware kernel modules build with no problems. :)
-
Here's my last guinea pig -- I built this one about 6 or 7 years ago:
System: Host: emsputer Kernel: 3.6-rc5.towo.1-siduction-686 i686 (32 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1.1 Desperado Reloaded - kde - (201206241910)
Machine: Mobo: Intel model: D975XBX version: AAD27094-305
Bios: Intel version: BX97510J.86A.1487.2007.0902.1724 date: 09/02/2007
CPU: Dual core Intel Pentium D CPU (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 vmx) bmips: 14280.4
Clock Speeds: 1: 3400.00 MHz 2: 3400.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI R430 [Radeon X800 (PCIE)] bus-ID: 02:00.0
X.Org: 1.12.3.902 drivers: fbdev,vesa Resolution: 1280x1024@0.0hz
GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 0x209) GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Network: Card-1: Intel 82573L Gigabit Ethernet Controller driver: e1000e ver: 2.0.0-k port: 2000 bus-ID: 05:00.0
IF: eth0 state: down mac: 00:16:76:b1:66:ea
Card-2: Atheros TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] driver: ath9k_htc usb-ID: 0cf3:7015
IF: wlan3 state: up mac: 90:f6:52:0a:c0:16
Drives: HDD Total Size: 1000.2GB (2.8% used) 1: model: WDC_WD1001FALS
Info: Processes: 162 Uptime: 5:33 Memory: 298.4/3293.7MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
It seems fine -- up for over 5 hours now, playing music and videos, etc. The Dell E6500 is also still up -- about 24 hours now.
-
System: Host: nescaya Kernel: 3.6-rc5.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1.1 Desperado Reloaded - kde - (201206241901)
Machine: Mobo: ASUSTeK model: P8Z68-V LE version: Rev X.0x serial: MT7017K06803175
Bios: American Megatrends version: 3808 date: 05/10/2012
CPU: Quad core Intel Core i7-2600K CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27200.5
Clock Speeds: 1: 1600.00 MHz 2: 1600.00 MHz 3: 1600.00 MHz 4: 1600.00 MHz 5: 1600.00 MHz 6: 1600.00 MHz 7: 3401.00 MHz 8: 1600.00 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0
X.org: 1.12.3.902 drivers: intel (unloaded: fbdev,vesa) tty size: 122x65 Advanced Data: N/A for root
Network: Card: Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) driver: ath9k bus-ID: 03:00.0
IF: wlan0 state: up mac: 1c:7e:e5:2a:84:eb
Drives: HDD Total Size: 2120.5GB (3.0% used) 1: model: ST31000526SV
2: model: OCZ 3: model: SAMSUNG_HD103UJ 4: model: OCZ
RAID: Device: 1: /dev/md0
Info: Processes: 235 Uptime: 32 min Memory: 620.1/15513.1MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
Ev'rything's fine here, also.
greets
ayla
....and notebook is up and running:
System: Host: tendara Kernel: 3.6-rc5.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1.1 Desperado Reloaded - kde - (201206241901)
Machine: Mobo: ASUSTeK model: P53E version: 1.0 Bios: American Megatrends version: P53E.209 date: 03/15/2012
CPU: Dual core Intel Core i5-2430M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9578.22
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 2401.00 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0
X.Org: 1.12.3.902 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 8.0.4 Direct Rendering: Yes
Network: Card-1: Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k bus-ID: 02:00.0
IF: wlan0 state: up mac: 74:2f:68:d0:ce:d3
Card-2: Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c ver: 1.0.1.0-NAPI port: b000 bus-ID: 03:00.0
IF: eth0 state: down mac: 54:04:a6:27:30:1e
Drives: HDD Total Size: 60.0GB (1.1% used) 1: model: OCZ
Info: Processes: 154 Uptime: 8 min Memory: 315.5/3871.4MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
-
im Gegensatz zum neusten siduction 3.5 Kernel sind wohl keine lirc-serial module dabei?
werden zumindest nicht geladen, und meine Fernbedienung will nicht.
-
Try 3.6-rc6
-
(sorry for bad english)
thanks towo,
it seems that everything here is fine with rc6:
my dvb_s-tv-card (saa7146 -> stv0299, budget_ci, budget_core) is now working in kaffeine (was not recognized with rc5)
System: Host: tux Kernel: 3.6-rc6.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 11.1 One Step Beyond - kde - (201112302141)
Machine: Mobo: Gigabyte model: GA-890GPA-UD3H version: x.x Bios: Award version: FGf date: 07/27/2011
CPU: Quad core AMD Phenom II X4 945 (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4a svm) bmips: 24105.6
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz 3: 800.00 MHz 4: 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI Juniper [Radeon HD 5700 Series] bus-ID: 01:00.0
X.Org: 1.12.3.902 driver: radeon Resolution: 1280x1024@60.0hz
GLX Renderer: Gallium 0.4 on AMD JUNIPER GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Network: Card: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: ce00 bus-ID: 04:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 1c:6f:65:31:6d:b6
Drives: HDD Total Size: 4500.9GB (17.9% used) 1: model: SAMSUNG_HD501LJ
2: model: Hitachi_HDS72302 3: model: Hitachi_HDS72101 4: model: Hitachi_HDS72101
RAID: Devices: 1: /dev/md1 2: /dev/md0
Info: Processes: 207 Uptime: 24 min Memory: 738.8/7989.9MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
tuxman
-
My remotecontrol needs up to now lirc-serial. I can't find this.
with "locate lirc|grep ko|grep 3.6-rc6"
I get :
/lib/modules/3.6-rc6.towo.1-siduction-amd64/kernel/drivers/media/rc/ir-lirc-codec.ko
/lib/modules/3.6-rc6.towo.1-siduction-amd64/kernel/drivers/media/rc/lirc_dev.ko
/lib/modules/3.6-rc6.towo.1-siduction-amd64/kernel/drivers/media/rc/keymaps/rc-lirc.ko
should this replace lirc_serial ? If yes, did you have a link where is explained to change hardware.conf and lirc.conf?
-
Please test the new packages, i had forget to activate lirc in the last build.
-
Thank you towo, everything is ok now. Remotcontrol is working. I dont have any issues with this kernel now.
3.6-rc6.towo.2-siduction-amd64
-
I got up my courage to try rc6 on my main productivity system -- 1.5 days up and no problems.
System: Host: imerabox Kernel: 3.6-rc6.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1)
Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: aptosid 2011-02 Ἡμέρα - kde-lite - (201107131633)
Machine: Mobo: ASUSTeK model: P6X58D-E version: Rev 1.xx Bios: American Megatrends version: 0602 date: 03/24/2011
CPU: Quad core Intel Core i7 CPU 950 (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 33737.6
Clock Speeds: 1: 4217.202 MHz 2: 4217.202 MHz 3: 4217.202 MHz 4: 4217.202 MHz 5: 4217.202 MHz 6: 4217.202 MHz 7: 4217.202 MHz 8: 4217.202 MHz
Graphics: Card: NVIDIA GF100 [GeForce GTX 480] bus-ID: 05:00.0
X.Org: 1.12.3.902 driver: nvidia Resolution: 1920x1200@59.9hz
GLX Renderer: GeForce GTX 480/PCIe/SSE2 GLX Version: 4.2.0 NVIDIA 304.48 Direct Rendering: Yes
Network: Card: Marvell 88E8056 PCI-E Gigabit Ethernet Controller driver: sky2 ver: 1.30 port: d800 bus-ID: 06:00.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 20:cf:30:5c:41:1d
Drives: HDD Total Size: 2136.5GB (3.2% used) 1: model: OCZ
2: model: OCZ 3: model: KINGSTON_SS100S2 4: model: WDC_WD1002FAEX 5: model: WDC_WD1002FAEX
Info: Processes: 325 Uptime: 1 day Memory: 1753.4/5966.2MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.15
-
Sep 21 17:44:25 siductionbox kernel: [ 0.000000] tsc: Fast TSC calibration failed
Sep 21 17:44:25 siductionbox kernel: [ 0.000000] tsc: PIT calibration matches HPET. 1 loops
Sep 21 17:44:25 siductionbox kernel: [ 0.000000] tsc: Detected 2000.071 MHz processor
Sep 21 17:44:25 siductionbox kernel: [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.14 BogoMIPS (lpj=2000071)
Sep 21 17:44:25 siductionbox kernel: [ 0.002008] pid_max: default: 32768 minimum: 301
Sep 21 17:44:25 siductionbox kernel: [ 0.002036] Security Framework initialized
Sep 21 17:44:25 siductionbox kernel: [ 0.002041] SELinux: Disabled at boot.
rc6 : extract form kern.log. What does that mean?
Bequimão
-
@towo, here is a minor issue with the 3.6 kernels -- no support for my old Logitech webcam.
With the last 3.5 kernel:
don@imerabox:/dev$ lsusb | grep Logitech
Bus 010 Device 002: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
don@imerabox:/dev$ uname -a
Linux imerabox 3.5-4.towo-siduction-amd64 #1 SMP PREEMPT Sat Sep 15 16:05:46 UTC 2012 x86_64 GNU/Linux
don@imerabox:/dev$ lsusb | grep Logitech
Bus 010 Device 002: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
don@imerabox:/dev$ lsmod | grep gspca
gspca_zc3xx 34906 0
gspca_main 17004 1 gspca_zc3xx
videodev 81181 2 gspca_main,gspca_zc3xx
usbcore 121584 10 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,gspca_main,usbhid,gspca_zc3xx,xhci_hcd
But, with the 3.6 rc kernels:
don@imerabox:~$ uname -a
Linux imerabox 3.6-rc6.towo.1-siduction-amd64 #1 SMP PREEMPT Tue Sep 18 16:29:39 UTC 2012 x86_64 GNU/Linux
don@imerabox:~$ lsusb | grep Logitech
Bus 010 Device 002: ID 046d:08d7 Logitech, Inc. QuickCam Communicate STX
don@imerabox:~$ lsmod | grep gspca
don@imerabox:~$
And there is no video device in /dev.
The microphone works great, btw.
Greetz, dibl
-
Thaks for the replay, i will fix this in the next upload.
-
Linux-3.6-rc7 is aviable, i have reenabled the gspca-modules, please try it.
-
This one looks fine on both the Asus desktop and also the Toshiba netbook.
When I installed the new kernel on the Asus, I saw these messages at the end -- I did not see them on the Toshiba (maybe I wasn't looking ...). I don't know if it is significant:
Setting up linux-headers-3.6-rc7.towo.1-siduction-amd64 (3.6.0-0.3) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.6-rc7.towo.1-siduction-amd64
Error! Bad return status for module build on kernel: 3.6-rc7.towo.1-siduction-amd64 (x86_64)
Consult /var/lib/dkms/v4l2loopback/0.6.1/build/make.log for more information.
That log says this:
DKMS make.log for v4l2loopback-0.6.1 for kernel 3.6-rc7.towo.1-siduction-amd64 (x86_64)
Mon Sep 24 08:08:50 EDT 2012
make: Entering directory `/usr/src/linux-headers-3.6-rc7.towo.1-siduction-amd64'
LD /var/lib/dkms/v4l2loopback/0.6.1/build/built-in.o
CC [M] /var/lib/dkms/v4l2loopback/0.6.1/build/v4l2loopback.o
/var/lib/dkms/v4l2loopback/0.6.1/build/v4l2loopback.c: In function ‘init_buffers’:
/var/lib/dkms/v4l2loopback/0.6.1/build/v4l2loopback.c:2027:6: error: ‘struct v4l2_buffer’ has no member named ‘input’
make[1]: *** [/var/lib/dkms/v4l2loopback/0.6.1/build/v4l2loopback.o] Error 1
make: *** [_module_/var/lib/dkms/v4l2loopback/0.6.1/build] Error 2
make: Leaving directory `/usr/src/linux-headers-3.6-rc7.towo.1-siduction-amd64'
However, the webcam is working well in skype for 15 minutes now.
-
I think, v4l2loopback is not ready for kernel 3.6.
-
@towo, runs perfectly well for me on mac-mini using proprietary wl.ko.
But that exactly I am whining now:
- On my Gentoo a self compiled linux-3.6-rc7 is segfaulting when starting wpa_supplicant - and using wl.ko
- Before "modprobe wl" does pass through though...
I have compiled using your .config and this segfaulting goes on. I don't get it. But I remember there is a special Debian kernel preparation:
cleaning out all proprietary firmware
Might be a new linux-3.6 firmware file is interfering my attempts on Gentoo with proprietary broadcom wl?
-
@towo, runs perfectly well for me on mac-mini using proprietary wl.ko.
But that exactly I am whining now:
- On my Gentoo a self compiled linux-3.6-rc7 is segfaulting when starting wpa_supplicant - and using wl.ko
- Before "modprobe wl" does pass through though...
I have compiled using your .config and this segfaulting goes on. I don't get it. But I remember there is a special Debian kernel preparation:
cleaning out all proprietary firmware
Might be a new linux-3.6 firmware file is interfering my attempts on Gentoo with proprietary broadcom wl?
ralul,
Can you give you the version of `wpa_supplicant -v` & broadcom-sta/-dkms driver version where it works (the mac-mini)?
I had the same with latest broadcom-dkms-6.20.55.19 (came pre-installed on new dell laptops that shipped with ubuntu oneiric).
I'm using LMDE. wpasupplicant 1.0-2
Tried with:
3.6-rc7.towo.1-siduction-amd64
and,
3.6-0.slh.1-aptosid-amd64 (http://ftp://ftp.spline.de/pub/aptosid/debian/pool/main/l/linux-aptosid/) (built on stable 3.6 release yesterday)
When I was getting kernel bug with 3.6-rc7, I compared to config of 3.5-liquorix, and there wasn't any relevant changes worth mentioning.
If wl is built with WEXT, boots okay, but wpa_supplicant fails to associate with AP (w/ wpa encryption), though it works in 3.5.x and prior.
If wl is built with nl/cfg80211 (as it should), Kernel BUG.
A few days ago I posted full details to debian bugtracker (to update to the new broadcom dkms driver) and linux-wireless, against 3.6-rc7:
http://marc.info/?l=linux-wireless&m=134875589522742&w=2
Edit: reported again against 3.6 stable -> http://marc.info/?l=linux-wireless&m=134908356432162&w=2
-
Congratulations @towo!
don@imerabox:~$ uname -a
Linux imerabox 3.6-0.towo-siduction-amd64 #1 SMP PREEMPT Mon Oct 1 11:10:12 UTC 2012 x86_64 GNU/Linux :D
-
Now i close this thread since linux-3.6 is released.