[DE] nvidia-Karte lässt sich nicht betreiben

[manilg]

Hi,

ich habe 2 Grafikkarten im Laptop:

Card-1: Intel Haswell-ULT Integrated Graphics Controller
           bus-ID: 00:02.0
           Card-2: NVIDIA GM108M [GeForce 840M] bus-ID: 0a:00.0

allerdings wird nur eine "gesehen"

lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)

Wenn ich den nvidia-Treiber installiere und  reboote startet X nicht

cat /etc/X11/xorg.conf.d/20-nvidia.conf
#
Section "Device"
         Identifier      "Device0"
                  Driver          "nvidia"
                  BusID          "PCI:a:0:0"
                  EndSection

was tun?

manilg

[bluelupo]

Hi manilg,

welche NVIDIA Pakete hast du installiert? Sind Fehler in der Xorg.0.log zu sehen?

[manilg]

Es ist der 340... Treiber, lt. Herstellerseite passt das für die Karte

hier die Ausgabe von xorg.log

Code: [Select]

[    29.083]
X.Org X Server 1.17.3
Release Date: 2015-10-26
[    29.083] X Protocol Version 11, Revision 0
[    29.083] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    29.083] Current Operating System: Linux yoda 4.2.5-towo.1-siduction-amd64 #1 SMP PREEMPT siduction 4.2-8 (2015-10-27) x86_64
[    29.083] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.5-towo.1-siduction-amd64 root=UUID=372bf357-a2e2-45e6-8c89-487b1ced573a ro quiet
[    29.083] Build Date: 27 October 2015  11:41:02PM
[    29.083] xorg-server 2:1.17.3-2 (http://www.debian.org/support)
[    29.083] Current version of pixman: 0.33.2
[    29.083]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    29.083] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.083] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov  7 13:42:21 2015
[    29.374] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    29.374] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    29.463] (==) No Layout section.  Using the first Screen section.
[    29.463] (==) No screen section available. Using defaults.
[    29.463] (**) |-->Screen "Default Screen Section" (0)
[    29.463] (**) |   |-->Monitor "<default monitor>"
[    29.477] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    29.477] (**) |   |-->Device "Device0"
[    29.477] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    29.477] (==) Automatically adding devices
[    29.477] (==) Automatically enabling devices
[    29.477] (==) Automatically adding GPU devices
[    29.506] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    29.506]     Entry deleted from font path.
[    29.507] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    29.507]     Entry deleted from font path.
[    29.507] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    29.507]     Entry deleted from font path.
[    29.507] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    29.507]     Entry deleted from font path.
[    29.507] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/100dpi,
    built-ins
[    29.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[    29.507] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.507] (II) Loader magic: 0x55d3fd934de0
[    29.507] (II) Module ABI versions:
[    29.507]     X.Org ANSI C Emulation: 0.4
[    29.507]     X.Org Video Driver: 19.0
[    29.507]     X.Org XInput driver : 21.0
[    29.507]     X.Org Server Extension : 9.0
[    29.509] (EE) systemd-logind: failed to get session: PID 1204 does not belong to any known session
[    29.509] (II) xfree86: Adding drm device (/dev/dri/card1)
[    29.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[    29.512] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2281 rev 11, Mem @ 0xb5000000/4194304, 0xc0000000/268435456, I/O @ 0x00007000/64
[    29.512] (--) PCI: (0:10:0:0) 10de:1341:103c:2281 rev 162, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128
[    29.519] (II) LoadModule: "glx"
[    29.831] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    31.194] (II) Module glx: vendor="NVIDIA Corporation"
[    31.194]     compiled for 4.0.2, module version = 1.0.0
[    31.194]     Module class: X.Org Server Extension
[    31.225] (II) NVIDIA GLX Module  340.93  Wed Aug 19 16:23:51 PDT 2015
[    31.248] (II) LoadModule: "nvidia"
[    31.275] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    31.509] (II) Module nvidia: vendor="NVIDIA Corporation"
[    31.509]     compiled for 4.0.2, module version = 1.0.0
[    31.509]     Module class: X.Org Video Driver
[    31.536] (II) NVIDIA dlloader X Driver  340.93  Wed Aug 19 16:01:53 PDT 2015
[    31.536] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    31.559] (++) using VT number 7

[    31.564] (EE) No devices detected.
[    31.564] (EE)
Fatal server error:
[    31.564] (EE) no screens found(EE)
[    31.564] (EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
 for help.
[    31.564] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    31.564] (EE)
 
Es sieht so aus als würde die Karte nicht gefunden??
Und wie kann ich, wenn ich Code eingeben will, den Tag beenden?

EDIT: Codetags gesetzt zwecks besserer Lesbarkeit gesetzt (Moderator bluelupo)

manilg

[bluelupo]

@manilg: Bitte den Output von dpkg -l | grep -i nvidia und inxi -G.

[unklarer]

Wie ich das hier lese, wird die nvidia nicht verwendet, weil sie im Bios nicht ausgewählt ist.   

[towo]

Das ist ein Optimus System!
Da kann man nicht einfach die Nvidia-Treiber installieren.

Code: [Select]

lspci | egrep -i "3D|vga|video"

sollte beide Devices auflisten.

[manilg]

Code: [Select]

ii  glx-alternative-nvidia                         0.6.93                              amd64        allows the selection of NVIDIA as GLX provider
ii  libegl1-nvidia:amd64                           340.93-6                            amd64        NVIDIA binary EGL libraries
ii  libgl1-nvidia-glx:amd64                        340.93-6                            amd64        NVIDIA binary OpenGL libraries
ii  libnvidia-eglcore:amd64                        340.93-6                            amd64        NVIDIA binary EGL core libraries
ii  libnvidia-ml1:amd64                            340.93-6                            amd64        NVIDIA Management Library (NVML) runtime library
ii  nvidia-alternative                             340.93-6                            amd64        allows the selection of NVIDIA as GLX provider
ii  nvidia-driver                                  340.93-6                            amd64        NVIDIA metapackage
ii  nvidia-driver-bin                              340.93-6                            amd64        NVIDIA driver support binaries
ii  nvidia-installer-cleanup                       20151021+1                          amd64        cleanup after driver installation with the nvidia-installer
ii  nvidia-kernel-common                           20151021+1                          amd64        NVIDIA binary kernel module support files
ii  nvidia-kernel-dkms                             340.93-6                            amd64        NVIDIA binary kernel module DKMS source
ii  nvidia-kernel-support                          340.93-6                            amd64        NVIDIA binary kernel module support files
ii  nvidia-modprobe                                349.16-1                            amd64        utility to load NVIDIA kernel modules and create device nodes
ii  nvidia-support                                 20151021+1                          amd64        NVIDIA binary graphics driver support files
ii  nvidia-vdpau-driver:amd64                      340.93-6                            amd64        Video Decode and Presentation API for Unix - NVIDIA driver
ii  xserver-xorg-video-nvidia                      340.93-6                            amd64        NVIDIA binary Xorg driver



[manilg]

@ unklarer

im bios lässt sich nichts auswählen


lspci | egrep -i "3D|vga|video"
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
0a:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)

"Das ist ein Optimus System!
Da kann man nicht einfach die Nvidia-Treiber installieren."

Was mache ich dann?

manilg

[towo]

Was mache ich dann?

Ganz ehrlich? Das Ding zurückgeben.
Du kannst DIch auch über Bumblebee informieren, aber das ist mehr eine Krücke als eine Lösung.

[whistler_mb]

Die Krücke krückt eigentlich ganz gut, nur rutscht man gern zwischendurch mal aus. Ist mir vor kurzem auch wieder mal passiert. Im aktuellen Stadium ist es nur eine Krücke.

Code: [Select]

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev ff)
Ich habe die aktuellen Treiber aus experimental installiert. Weiterhin brauchst du noch bumblebee und primusrun und primusrun-libs. Falls du 32bit Programme nutzen willst brauchst du noch primusrun-libs:i386

Für Spiele sind dann noch ein Schwung 32bit libs für 3D nötig. So kann ich auch Skyrim spielen. Leider muss mir seit der gcc5 Transition eine lib fehlen, denn bestimmte Texturen werden nicht mehr korrekt dargestellt.