Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic:  Warning: Careful with Dist-Upgrades! / Vorsicht bei Dist-Upgrades!  (Read 6784 times)

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.838

As most of you will have heard by now, Debian 9 »Stretch« was released on the weekend. That means, Sid could be more active over the next few weeks and broken packages or harmful situations could occur. Please be careful with dist-upgrades and read carefuly what apt puts out during the upgrade.



Wie ihr bestimmt mittlerweile alle mitbekommen habt, wurde am Wochenende Debian 9 »Stretch« veröffentlicht. Das bedeutet, dass Sid aktiver werden könnte und potenziell kaputte Pakete und gefährliche Situationen enthalten kann. Bitte achtet in eurem eigenen Interesse darauf, was apt während des Upgrades ausgibt.
« Last Edit: 2017/06/19, 12:17:57 by devil »

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
harmful situations s/could/will occur

My 2¢
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)

mylo

  • Guest
Hi,

thanks for the explicite warning. I took care and d-u'ed (roundabout > 100+ packs) and here everything ran fine through (sorry lost the list).

Offline ReinerS

  • User
  • Posts: 1.061
Today mostly Libreoffice was to be removed. Lokks like a transition going on.

Heute sollten die meisten Libreoffice-Pakete entfernt werden. Scheint ein Uopdate/Transition im Gange zus ein.

Grüße

Reiner
slackware => SuSE => kanotix => sidux => aptosid  => siduction

Offline kokurya

  • User
  • Posts: 68
Dist-upgraded today including Libreoffice. No problems so far
Linux is highly user friendly, it is just highly selective who it is friends with.

Offline ReinerS

  • User
  • Posts: 1.061
Yes, its obviously done. Only old libreoffice-gtk gets removed.

Regards

Greiner
slackware => SuSE => kanotix => sidux => aptosid  => siduction

Schultze

  • Guest
Hallo,

gestern habe ich 17.1 installiert und anschließend ein dist-upgrade durchgeführt.
Nach dem Upgrade ist keine graphische Oberfläche mehr vorhanden. Ist das Problem bekannt?


Hi,

yesterday i installed the 17.1 and than i start a dist-upgrade. After this upgrade, there is no graphical desktop.
Is this a known bug?


Thanks,
Schultze

Schultze

  • Guest
Beim Versuch, die Oberfläche von der Konsole aus per startx zu starten werden folgende Zeilen ausgegeben:

If I try to start the GUI via startx from console, I get the following lines:

Code: [Select]
X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
Current Operating System: Linux talisker 4.13.0-towo.1-siduction-amd64 #1 SMP PREEMPT siduction 4.13-1 (2017-09-04) x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-towo.1-siduction-amd64 root=UUID=daf8389c-4635-4eda-ae55-eb1c9c468e1e ro quiet resume=UUID=11c6547e-73a3-4bfc-905d-dc03ba17758c systemd.show_status=1
Build Date: 07 July 2017  06:22:09AM
xorg-server 2:1.19.3-2 (https://www.debian.org/support)
Current version of pixman: 0.34.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/ms/.local/share/xorg/Xorg.1.log", Time: Wed Sep  6 16:41:27 2017
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
xinit: connection to X server lost
 
waiting for X server to shut down .(II) Server terminated successfully (0). Closing log file.

Offline bluelupo

  • User
  • Posts: 2.068
    • BluelupoMe
Hallo Schultze,

du musst uns schon ein wenig Info zu deiner verwendeten HW hier posten (Kommando inxi).

BTW. Du solltest dafür einen eigenen Thread aufmachen, da dies nichts oder sehr wenig mit Problemen bei einem d-u zu tun hat.

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
@bluelupo - nö, die Hardware ist so wichtig nich - von Interesse wäre die Ausgabe von apt gewesen. Mehr dazu im eigenen Fred.
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)

Schultze

  • Guest
@bluelupo - nö, die Hardware ist so wichtig nich - von Interesse wäre die Ausgabe von apt gewesen. Mehr dazu im eigenen Fred.

Neuer 'Fred' auf diesem Board, oder wo?

Sorry, bin ganz neu hier.

Schultze

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
https://forum.siduction.org/index.php?topic=6835.0 - ist alles unwichtig, ausser Füsse stillhalten. Wer die Füsse nicht stillgehalten hat, für den gibt es die folgenden Chancen: a) aussitzen b) snapshots.debian.org von gestern.
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)

Schultze

  • Guest
https://forum.siduction.org/index.php?topic=6835.0 - ist alles unwichtig, ausser Füsse stillhalten. Wer die Füsse nicht stillgehalten hat, für den gibt es die folgenden Chancen: a) aussitzen b) snapshots.debian.org von gestern.

Danke für den Hinweis. Dann werde ich das wohl aussitzen.

Schultze

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.838
Schultze,


du musst bei einem dist-upgrade schon drauf achten ob apt etwas entfernen will, denn das kommt schon häufiger vor. Dann wartet man einfach bis zum nächsten Tag oder nutzt erstmal apt update um zu aktualisieren was ohne Entfernung von Paketen geht.

Da bei dir jetzt unklar ist, was entfernt wurde, rate ich zur Neuinstallation. Is ja eh alles noch ganz frisch.


Schultze

  • Guest
Schultze,
...
Da bei dir jetzt unklar ist, was entfernt wurde, rate ich zur Neuinstallation. Is ja eh alles noch ganz frisch.

Da liegt eben das Problem. Das System ließ sich erst nicht installieren, bis es nach vielen Versuchen dann, ohne für mich erkennbaren unterschied, doch funktionierte. https://forum.siduction.org/index.php?topic=6832.0

Ich habe es schon mehrfach wieder versucht, bisher ohne Erfolg.

Schultze