Siduction Forum

Siduction Forum => Installation - Support => Topic started by: NochEinNeuer on 2018/11/20, 18:48:18

Title: Probleme mit einloggen
Post by: NochEinNeuer on 2018/11/20, 18:48:18
Hallo,
das Problem mit grub2 ist gelöst und schon tut sich was neues auf.Installiert wurde von der DVD. Da diese ja schon etwas älter ist, so kamen über 1 GB an Updates zusammen.Also machte ich heute früh mein update und danach ein upgrade.Das ganze lief anscheinend auch sauber durch.
Nach dem ich vorhin von der Arbeit kam gab es einen Neustart.
Problem: Einloggen in gnome geht nicht. Ich probierte auch gnome-classic mit gleichem Ergebnis.Einloggen in der Konsole geht problemlos. Bei der grafischen Ansicht kommt auch bei falschem Passwort der Hinweis das die Anmeldedaten falsch wären.Mit richtigem Passwort klappt es allerdings nicht. Das ganze tut so als würde sich einloggen und ich kann die Maus bewegen aber nix auswählen. Der Anmeldebildschirm steht dann da mit meinem Benutzernamen und den schwarzen Punkten fürs Passwort und nix geht mehr :(
Hat vielleicht dazu noch jemand eine Idee?
Ich vermute mal, das es am Update von heut früh liegen könnte.
Ein erneutes update mit upgrade brachte auch keine Verbesserung :(
Viele GrüßeJürgen
Title: Re: Probleme mit einloggen
Post by: absolut on 2018/11/20, 21:46:49
upgrade oder dist-upgrade?
Title: Re: Probleme mit einloggen
Post by: NochEinNeuer on 2018/11/20, 22:09:43
Zuerst nur ein Update. Nach dem Problem mit einloggen auch ein d-u.


Probeweise lightdm probiert: Anneldefenster verschwand aber der Hintergrund von lightdm blieb.
Mit gdm3 ging überhaupt nix.
Also bin ich wieder beim ursprünglichen ssdm.


Selbst nach 15 Minuten hing das einloggen noch.


Evtl muss ich wirklich nur einige Tage abwarten und regelmäßig ein d-u machen damit es wieder funzt

Title: Re: Probleme mit einloggen
Post by: absolut on 2018/11/20, 22:21:43
sorry, ich steh auf dem schlauch... oder wie verwendest du die begriffe?

update  =  apt update ?

upgrade = apt upgrade ?

d-u = apt dist-upgrade ?

Title: Re: Probleme mit einloggen
Post by: NochEinNeuer on 2018/11/20, 22:34:40
Sorry.
Vor einem Upgrade bzw. dist-uprade machte ich immer ein apt update und dann ein apt upgrade.


Danach ging es nicht mehr mit einloggen im Grafikmodus. Auf der Konsole klappte es aber mit einloggen.


In der Hoffnung das Problem zu beheben machte ich noch ein apt update und dann ein apt dist-upgrade
Title: Re: Probleme mit einloggen
Post by: axt on 2018/11/21, 09:38:10
Sei nicht so umständlich, die Befehlsfolge heißt

Code: [Select]
apt update && apt full-upgrade

Quote from: NochEinNeuer
nicht mehr mit einloggen im Grafikmodus.


Es sind zwar auch wieder xorg-Pakete aktualisiert worden und gerade erst mesa-Pakete, aber grafische Loginmanager kommen schließlich. Geht nur nicht weiter.

Logge Dich in einer virtuellen Konsole ein, führe

Code: [Select]
rm .*authority

aus und reboote!

Title: Re: Probleme mit einloggen
Post by: axt on 2018/11/21, 09:54:49
Btw.,

Quote from: NochEinNeuer
Installiert wurde von der DVD. Da diese ja schon etwas älter ist, so kamen über 1 GB an Updates zusammen.


Daß das Probleme geradezu anzieht, sollte klar sein. Du hättest auf #siduction-de nach einem aktuellen Build fragen können. Einer des Teams mit Zugang hätte Dir (so nicht gerade eines vorliegend) brandaktuell eines des gewünschten Flavors erstellt.

Edit: Den unteren Abschnitt abgetrennt, um ihn (ausführlicher abgehandelt) unter Haeufigere Images (https://forum.siduction.org/index.php?topic=7470.new) separat zu diskutieren.
Title: Re: Probleme mit einloggen
Post by: melmarker on 2018/11/21, 11:09:52
Hurra, wir haben einen neuen Maintainer
Title: (gelöst) Re: Probleme mit einloggen
Post by: NochEinNeuer on 2018/11/22, 21:37:56
Jetzt will ich mich nochmal zu Wort melden.
Das d-u hatte da keine Verbesserung gebracht, aber mir kam dann die rettende Idee: Ich hatte gnome-control-center und gnome-shell auf hold gesetzt gehabt. Ein ändern auf unhold, installieren und voila....auch in der Grafik ging wieder das einloggen :)
Allerdings vermute ich einmal, das der große Berg an Updates auch zu dem Fehler beitrug.
Unter der alten Installation waren diese Pakete auch auf hold gesetzt und es gab keine Probleme mit einloggen.
Hauptsache es läuft wieder. In den letzten Tagen bekam ich auch etliche neue Erkenntnisse. Eine wäre z.B. das die Hilfe hier im Forum fantastisch ist.An dieser Stelle nochmals vielen, vielen Dank an alle!



Title: Re: Probleme mit einloggen
Post by: melmarker on 2018/11/22, 22:19:38
ja - holds können einem sehr schnell das Genick brechen und sollten nur im äußersten Notfall eingesetzt werden
Title: Re: Probleme mit einloggen
Post by: piper on 2018/11/22, 22:30:33
My budgie build (based on gnome3)

Code: [Select]
root@x2:/home/piper3# apt update; apt full-upgrade -dy
The following packages will be REMOVED:
  budgie-desktop colord gnome-control-center hplip libcupscgi1 libcupsmime1 libcupsppdc1 libsane1 libsane1:i386 printer-driver-postscript-hp sane
  sane-utils
The following NEW packages will be installed:
  freetype2-doc libpython3.7-minimal libpython3.7-stdlib python3.7 python3.7-minimal
The following packages will be upgraded:
  cups cups-client cups-core-drivers cups-daemon cups-ipp-utils hplip-data libcups2 libcups2:i386 libcupsimage2 libfreetype6 libfreetype6:i386
  libfreetype6-dev libhpmud0 libpython3-stdlib libsane-common libsane-hpaio printer-driver-hpcups printer-driver-hpijs python3 python3-minimal
20 upgraded, 5 newly installed, 12 to remove and 0 not upgraded.
Need to get 2,308 kB/18.8 MB of archives.
After this operation, 7,886 kB disk space will be freed.
Get:1 http://incoming.debian.org/debian-buildd buildd-unstable/main amd64 freetype2-doc all 2.9.1-3 [2,308 kB]
Fetched 2,308 kB in 1s (2,024 kB/s)       
Download complete and in download only mode
root@x2:/home/piper3#


I let it all go, then

Code: [Select]
apt install budgie-desktop
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  colord gnome-control-center libsane sane-utils
Suggested packages:
  colord-sensor-argyll gnome-software | gnome-packagekit libcanberra-gtk-module hplip unpaper
The following NEW packages will be installed:
  budgie-desktop colord gnome-control-center libsane sane-utils
0 upgraded, 5 newly installed, 0 to remove and 1 not upgraded.
Need to get 4,151 kB/4,425 kB of archives.
After this operation, 17.9 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian unstable/main amd64 libsane amd64 1.0.27-3.1 [2,186 kB]
Get:2 http://deb.debian.org/debian unstable/main amd64 gnome-control-center amd64 1:3.30.2-1 [1,770 kB]
Get:3 https://packages.siduction.org/fixes unstable/main amd64 colord amd64 1.4.3-3.1 [195 kB]
Fetched 4,151 kB in 2s (2,120 kB/s)                                         
Preconfiguring packages ...
Selecting previously unselected package libsane:amd64.
(Reading database ... 246240 files and directories currently installed.)
Preparing to unpack .../libsane_1.0.27-3.1_amd64.deb ...
Unpacking libsane:amd64 (1.0.27-3.1) ...
Selecting previously unselected package colord.
Preparing to unpack .../colord_1.4.3-3.1_amd64.deb ...
Unpacking colord (1.4.3-3.1) ...
Selecting previously unselected package gnome-control-center.
Preparing to unpack .../gnome-control-center_1%3a3.30.2-1_amd64.deb ...
Unpacking gnome-control-center (1:3.30.2-1) ...
Selecting previously unselected package budgie-desktop.
Preparing to unpack .../budgie-desktop_10.4+git20180830.02.f2dbc215fdb-2_all.deb ...
Unpacking budgie-desktop (10.4+git20180830.02.f2dbc215fdb-2) ...
Selecting previously unselected package sane-utils.
Preparing to unpack .../sane-utils_1.0.27-3.1_amd64.deb ...
Unpacking sane-utils (1.0.27-3.1) ...
Processing triggers for mime-support (3.61) ...
Processing triggers for desktop-file-utils (0.23-4) ...
Setting up libsane:amd64 (1.0.27-3.1) ...
Processing triggers for libglib2.0-0:i386 (2.58.1-2) ...
Processing triggers for libglib2.0-0:amd64 (2.58.1-2) ...
Processing triggers for siduction-dynamic-dms (2016.01.31) ...
Setting up colord (1.4.3-3.1) ...
colord.service is a disabled or a static unit, not starting it.
Processing triggers for libc-bin (2.27-8) ...
Processing triggers for udev (239-13) ...
Processing triggers for systemd (239-13) ...
Processing triggers for man-db (2.8.4-3) ...
Processing triggers for gnome-menus (3.13.3-11) ...
Processing triggers for dbus (1.12.10-1) ...
Setting up sane-utils (1.0.27-3.1) ...
update-inetd: warning: cannot add service, /etc/inetd.conf does not exist
Setting up gnome-control-center (1:3.30.2-1) ...
Setting up budgie-desktop (10.4+git20180830.02.f2dbc215fdb-2) ...
root@x2:/home/piper3#

All is good :P

gnome-control-center gnome-shell should never be on hold full stop ;)
Title: Re: Probleme mit einloggen
Post by: Xaver on 2018/11/24, 17:10:51
@ piper
I have about half  a year of experience with siduction only. So I am curious to learn. But you (as others here) just repeat unsubstantiated rules.
Quote
'full-upgrade' (use of hold) should not be used in the same sentence, it's just so wrong
Maybe I would agree, if you give me one single reason.
Title: Re: Probleme mit einloggen
Post by: piper on 2018/11/24, 17:30:39
@Xaver

My last reply to you on this

It will break your system, especially in a "rolling release",  although this is not a "true" rolling release, it is the closest thing to it (debian sid), but, you seem like a smart mate (insert sarcasm) , your on your own, it is your system after all, you can do as you wish/please/desire,  no-one is telling you what to do on your system.

Just don't ask for support.

Have a nice day, and Please, don't forget to smile :P :P
Title: Re: Probleme mit einloggen
Post by: dibl on 2018/11/24, 18:16:04
Quote from: Xaver
....you (as others here) just repeat unsubstantiated rules.

The problem here is, there are no rules for using sid, substantiated or otherwise.  It is not recommended for use by the official Debian project:

https://www.debian.org/releases/sid/

So, either you listen carefully to the advice of those who have been using and supporting it for many years, or you do what feels right to you and end up with a broken system.  It's that simple.

Title: Re: Probleme mit einloggen
Post by: melmarker on 2018/11/25, 01:27:53
@dibl and @piper - there are some unwritten rules and laws:

* don't be the first with every dist-upgrade, read the forum first
* use your brain if possible
* don't type: "Yes ..." if apt ask to remove essential packages
* read the apt output, before hitting <Y> (doubts? :P)
* if in doubt, hit <N>
* don't use apt dist-upgrade --assume-yes

and some others that i might have forgotten
Title: Re: Probleme mit einloggen
Post by: piper on 2018/11/25, 02:34:50
WTF, you expect me to ... gasp  ... read, are you serious? why?

I have unattended upgrades setup 3 times in case the first 2 fail, when I say "Yes" I mean Yes

apt full-upgrade --assume-yes x3  --enforce holds --overwrite --assume-yes if not --burn harddrive --assume-yes


This script.sh has never failed me, the hell with a cron job :P

just to make sure

dpkg-reconfigure -plow unattended-upgrades



Title: Re: Probleme mit einloggen
Post by: Xaver on 2018/11/25, 15:19:24
@ Piper
Sorry, if I have peeved you. That is not my intention.
I was hoping to get an idea, how short time 'hold' during a transition period could brake a system. To learn I need to know some coherences.
So I beg your pardon for having been so insistant.

@ Melmarker
Thank you for your list. I suggest to add:
If bugs are indicated check bugs.debian.org before you upgrade.
Title: Re: Probleme mit einloggen
Post by: piper on 2018/11/25, 15:25:35
@Xaver

You can never piss me off (12 grandchildren) , but it is better to be pissed off then pissed on ;)

It's all good mate :P
Title: Re: Probleme mit einloggen
Post by: horo on 2018/11/28, 12:13:00
...
and some others that i might have forgotten
These two following rules are so crystal clear to every enlighted siduction user, but it doesn't hurt to repeat:
* Do not use synaptic!
* Avoid aptitude.
And a last one for guys like H*n*sch:
* It is your system, do what you want - if it breaks you can keep the pieces.

Ciao, Martin