Siduction Forum
Siduction Forum => Hardware - Support => Topic started by: Beni on 2010/09/18, 00:15:11
-
Hallo
mein CD-Rom ist seit heute nicht mehr ansprechbar :( Dieses Problem ist im Sidux-Forum unter
http://sidux.com/index.php?name=PNphpBB2&file=viewtopic&t=21213&highlight=cdrom
angesprochen worden, wie es aber aussieht ohne Ergebnis.
Bei mir tritt dieses Verhalten seit dem Update auf aptosid auf. Allerdings bleibt bei mir ein manuelles mounten als root auch erfolglos. Das Laufwerk habe ich gewechselt, ohne Erfolg.
mount /dev/sr0
gibt mount: can't find /dev/sr0 in /etc/fstab or /etc/mtab
aus.
In der fstab ist das Laufwerk eingetragen, dies hilft aber nichts. Ein löschen des Eintrages bewirkt ebenfalls nichts.
In der mtab steht überhaubt kein CD-Rom drinnen. Stimmt das so? Oder sollte dort was stehen?
Hat vielleicht schon jemand eine Lösung gefunden?
Danke und Gruss
Beni
-
willst du einfach mal deine fstab hier hinschreiben? Würde einiges erleichtern und auch einen auszug aus dmesg, nach dem einlegen einer cd...
-
Evtl. wäre auch die Ausgabe von "ls /dev" hilfreich. VLt. existiert das CD-LW ja unter einem anderen Namen (Bei mir ist das so, aber ich habe auch keine Standard-Sidux/Aptosid-Installation).
-
Hallo
besten Dank für Eure Rückmeldung. Folgendes wird ausgegeben:
In der fstab sind folgende Einträge:# <filesystem> <mount point> <fstype> <mount options> <dump> <pass>
/dev/disk/by-uuid/88D0C048D0C03E66 /media/WinXP ntfs auto,users,ro,dmask=0022,fmask=0133,nls=utf8 0 0
UUID=8628afb3-cd8e-4af6-bc8c-fc9c2395698d / ext4 defaults,errors=remount-ro,noatime,barrier=0 0 1
UUID=ded9f25d-eb70-493c-ba03-26868b8d21d5 /home ext4 defaults,noatime 0 2
/dev/disk/by-uuid/73EA-CD99 /media/Transfer vfat auto,users,rw,quiet,umask=000,shortname=lower 0 0
UUID=88920519-c1c0-47c0-ad48-1d002db9ecbe /media/homedata ext4 auto,users,rw,exec,noatime 0 2
/dev/cdrom /media/cdrom udf,iso9660 noauto,ro,users 0 0
/dev/disk/by-label/Backup /media/Backup ext4 auto,users,rw,exec,noatime 0 2
dmesg mit eingelegter CD gibt aus:
[ 0.261875] ACPI: Dynamic OEM Table Load:
[ 0.261877] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.262040] ACPI: SSDT 00000000bfee8680 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.262190] ACPI: Dynamic OEM Table Load:
[ 0.262192] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.262226] ACPI: Interpreter enabled
[ 0.262228] ACPI: (supports S0 S3 S4 S5)
[ 0.262243] ACPI: Using IOAPIC for interrupt routing
[ 0.270106] ACPI: No dock devices found.
[ 0.270109] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.271050] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.271052] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.271054] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.271056] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.271058] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 0.271108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271111] pci 0000:00:01.0: PME# disabled
[ 0.271163] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f]
[ 0.271213] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f]
[ 0.271262] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f]
[ 0.271320] pci 0000:00:1a.7: reg 10: [mem 0xea104000-0xea1043ff]
[ 0.271381] pci 0000:00:1b.0: reg 10: [mem 0xea100000-0xea103fff 64bit]
[ 0.271412] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271415] pci 0000:00:1b.0: PME# disabled
[ 0.271464] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271467] pci 0000:00:1c.0: PME# disabled
[ 0.271517] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.271520] pci 0000:00:1c.3: PME# disabled
[ 0.271570] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.271573] pci 0000:00:1c.4: PME# disabled
[ 0.271613] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.271663] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.271713] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.271754] pci 0000:00:1d.7: reg 10: [mem 0xea105000-0xea1053ff]
[ 0.271875] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.271878] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.271881] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.271883] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.271921] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.271925] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.271929] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.271933] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.271937] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.271941] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f]
[ 0.271974] pci 0000:00:1f.3: reg 10: [mem 0xea106000-0xea1060ff 64bit]
[ 0.271984] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.272018] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707]
[ 0.272022] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803]
[ 0.272026] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907]
[ 0.272030] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03]
[ 0.272034] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f]
[ 0.272038] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.272090] pci 0000:01:00.0: reg 10: [mem 0xe6000000-0xe6ffffff]
[ 0.272097] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.272103] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe5ffffff 64bit]
[ 0.272107] pci 0000:01:00.0: reg 24: [io 0xb000-0xb07f]
[ 0.272111] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272145] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.272147] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.272149] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.272152] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.272182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.272185] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.272188] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272192] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272290] pci 0000:03:00.0: reg 24: [mem 0xea000000-0xea001fff]
[ 0.272336] pci 0000:03:00.0: PME# supported from D3hot
[ 0.272341] pci 0000:03:00.0: PME# disabled
[ 0.272380] pci 0000:03:00.1: reg 10: [io 0xc000-0xc007]
[ 0.272388] pci 0000:03:00.1: reg 14: [io 0xc100-0xc103]
[ 0.272395] pci 0000:03:00.1: reg 18: [io 0xc200-0xc207]
[ 0.272402] pci 0000:03:00.1: reg 1c: [io 0xc300-0xc303]
[ 0.272409] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.272462] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272473] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.272476] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.272479] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff]
[ 0.272483] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272542] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.272561] pci 0000:04:00.0: reg 18: [mem 0xe9000000-0xe9000fff 64bit]
[ 0.272579] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272620] pci 0000:04:00.0: supports D1 D2
[ 0.272621] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.272625] pci 0000:04:00.0: PME# disabled
[ 0.272645] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272653] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.272656] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.272659] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.272663] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272711] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.272714] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.272717] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272721] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272723] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.272725] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.272727] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.272728] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.272730] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 0.272747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.272867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.272910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.272946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.286058] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.286126] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.286193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.286259] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.286326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.286393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.286459] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.286526] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.286564] HEST: Table is not found!
[ 0.287009] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.287012] vgaarb: loaded
[ 0.287038] PCI: Using ACPI for IRQ routing
[ 0.287038] PCI: pci_cache_line_size set to 64 bytes
[ 0.287073] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.287075] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
[ 0.287089] NetLabel: Initializing
[ 0.287089] NetLabel: domain hash size = 128
[ 0.287089] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.287089] NetLabel: unlabeled traffic allowed by default
[ 0.287089] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.287089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.287089] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.291011] Switching to clocksource tsc
[ 0.291030] pnp: PnP ACPI init
[ 0.291031] ACPI: bus type pnp registered
[ 0.293683] pnp: PnP ACPI: found 14 devices
[ 0.293684] ACPI: ACPI bus type pnp unregistered
[ 0.293690] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.293693] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.293694] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.293697] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.293698] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.293703] system 00:0a: [io 0x0400-0x04bf] could not be reserved
[ 0.293709] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.293713] system 00:0c: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.293715] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.293717] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.293720] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.293722] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved
[ 0.293724] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.293726] system 00:0c: [mem 0x00100000-0xbfedffff] could not be reserved
[ 0.293728] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.293730] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.293732] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.293734] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.293735] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.293737] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.293739] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.303623] pci 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
[ 0.303626] pci 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303628] pci 0000:00:1c.3: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303631] pci 0000:00:1c.4: BAR 15: assigned [mem 0xea800000-0xea9fffff pref]
[ 0.303633] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe701ffff pref]
[ 0.303635] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.303637] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.303640] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.303642] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.303645] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.303647] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.303651] pci 0000:00:1c.0: bridge window [mem 0xea200000-0xea3fffff]
[ 0.303654] pci 0000:00:1c.0: bridge window [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303658] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.303660] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.303664] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff]
[ 0.303667] pci 0000:00:1c.3: bridge window [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303671] pci 0000:04:00.0: BAR 6: assigned [mem 0xea800000-0xea81ffff pref]
[ 0.303673] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.303675] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.303679] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.303681] pci 0000:00:1c.4: bridge window [mem 0xea800000-0xea9fffff pref]
[ 0.303686] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.303688] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.303691] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.303694] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.303701] alloc irq_desc for 16 on node -1
[ 0.303703] alloc kstat_irqs on node -1
[ 0.303707] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303709] pci 0000:00:01.0: setting latency timer to 64
[ 0.303715] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303718] pci 0000:00:1c.0: setting latency timer to 64
[ 0.303723] alloc irq_desc for 19 on node -1
[ 0.303724] alloc kstat_irqs on node -1
[ 0.303726] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.303729] pci 0000:00:1c.3: setting latency timer to 64
[ 0.303735] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303738] pci 0000:00:1c.4: setting latency timer to 64
[ 0.303742] pci 0000:00:1e.0: setting latency timer to 64
[ 0.303745] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.303746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.303748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.303749] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.303751] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.303752] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.303754] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff]
[ 0.303755] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.303757] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.303759] pci_bus 0000:02: resource 1 [mem 0xea200000-0xea3fffff]
[ 0.303760] pci_bus 0000:02: resource 2 [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303762] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.303763] pci_bus 0000:03: resource 1 [mem 0xea000000-0xea0fffff]
[ 0.303765] pci_bus 0000:03: resource 2 [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303767] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.303768] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.303770] pci_bus 0000:04: resource 2 [mem 0xea800000-0xea9fffff pref]
[ 0.303771] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.303773] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.303774] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.303776] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.303777] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.303779] pci_bus 0000:05: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.303797] NET: Registered protocol family 2
[ 0.303898] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304593] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.307156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.307582] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.307584] TCP reno registered
[ 0.307592] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.307626] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.307743] NET: Registered protocol family 1
[ 0.307923] pci 0000:01:00.0: Boot video device
[ 0.307932] PCI: CLS 32 bytes, default 64
[ 0.307974] Unpacking initramfs...
[ 0.503368] Freeing initrd memory: 11464k freed
[ 0.506559] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.506563] Placing 64MB software IO TLB between ffff880001e79000 - ffff880005e79000
[ 0.506565] software IO TLB at phys 0x1e79000 - 0x5e79000
[ 0.508871] audit: initializing netlink socket (disabled)
[ 0.508884] type=2000 audit(1284821690.507:1): initialized
[ 0.509197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.513277] VFS: Disk quotas dquot_6.5.2
[ 0.513370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.513486] msgmni has been set to 7933
[ 0.513878] alg: No test for stdrng (krng)
[ 0.514083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.514086] io scheduler noop registered
[ 0.514088] io scheduler deadline registered
[ 0.514163] io scheduler cfq registered (default)
[ 0.514276] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.514292] alloc irq_desc for 40 on node -1
[ 0.514294] alloc kstat_irqs on node -1
[ 0.514301] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.514448] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.514470] alloc irq_desc for 41 on node -1
[ 0.514472] alloc kstat_irqs on node -1
[ 0.514476] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.514697] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.514719] alloc irq_desc for 42 on node -1
[ 0.514720] alloc kstat_irqs on node -1
[ 0.514725] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.514944] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.514967] alloc irq_desc for 43 on node -1
[ 0.514968] alloc kstat_irqs on node -1
[ 0.514973] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.515702] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005100000, using 1536k, total 1536k
[ 0.515704] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 0.515706] vesafb: scrolling: redraw
[ 0.515707] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.525678] Console: switching to colour frame buffer device 128x48
[ 0.534779] fb0: VESA VGA frame buffer device
[ 0.534965] ERST: Table is not found!
[ 0.535284] Linux agpgart interface v0.103
[ 0.535286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.535421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.535980] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.536363] Fixed MDIO Bus: probed
[ 0.536506] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.536507] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.536666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.536868] mice: PS/2 mouse device common for all mice
[ 0.536936] cpuidle: using governor ladder
[ 0.536937] cpuidle: using governor menu
[ 0.537113] TCP cubic registered
[ 0.537405] NET: Registered protocol family 10
[ 0.537721] lo: Disabled Privacy Extensions
[ 0.538126] registered taskstats version 1
[ 0.538416] Freeing unused kernel memory: 664k freed
[ 0.553771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.591488] udev: starting version 161
[ 0.632035] usbcore: registered new interface driver usbfs
[ 0.632059] usbcore: registered new interface driver hub
[ 0.635000] usbcore: registered new device driver usb
[ 0.647758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.647791] alloc irq_desc for 18 on node -1
[ 0.647792] alloc kstat_irqs on node -1
[ 0.647799] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.647831] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.647833] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.647849] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.647894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.647916] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.647969] r8169 0000:04:00.0: setting latency timer to 64
[ 0.648032] alloc irq_desc for 44 on node -1
[ 0.648034] alloc kstat_irqs on node -1
[ 0.648047] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 0.648381] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000066a000, 00:1a:4d:56:53:78, XID 18000000 IRQ 44
[ 0.650563] SCSI subsystem initialized
[ 0.654043] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.654059] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea104000
[ 0.663943] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.663959] libata version 3.00 loaded.
[ 0.663965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.663967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.663969] usb usb1: Product: EHCI Host Controller
[ 0.663970] usb usb1: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[ 0.663972] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.664060] hub 1-0:1.0: USB hub found
[ 0.664064] hub 1-0:1.0: 6 ports detected
[ 0.664135] alloc irq_desc for 23 on node -1
[ 0.664137] alloc kstat_irqs on node -1
[ 0.664141] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.664164] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.664167] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.664174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.668065] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.668079] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea105000
[ 0.677857] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.677874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.677877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.677879] usb usb2: Product: EHCI Host Controller
[ 0.677881] usb usb2: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[ 0.677883] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.677958] hub 2-0:1.0: USB hub found
[ 0.677962] hub 2-0:1.0: 6 ports detected
[ 0.678048] ata_piix 0000:00:1f.2: version 2.13
[ 0.678072] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.678076] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.678111] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.678154] scsi0 : ata_piix
[ 0.678213] scsi1 : ata_piix
[ 0.678749] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.678753] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.678791] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.678795] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.678821] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.680075] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.680080] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.680101] scsi2 : ata_piix
[ 0.680116] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.680187] scsi3 : ata_piix
[ 0.680189] scsi4 : pata_jmicron
[ 0.680283] scsi5 : pata_jmicron
[ 0.680465] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.681585] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 0.681588] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 0.681611] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.681617] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.681619] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.681625] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.681647] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 0.681671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.681673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681674] usb usb3: Product: UHCI Host Controller
[ 0.681676] usb usb3: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.681677] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.681740] hub 3-0:1.0: USB hub found
[ 0.681743] hub 3-0:1.0: 2 ports detected
[ 0.681833] alloc irq_desc for 21 on node -1
[ 0.681834] alloc kstat_irqs on node -1
[ 0.681837] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.681843] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.681845] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.681851] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.681876] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 0.681899] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.681901] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681902] usb usb4: Product: UHCI Host Controller
[ 0.681904] usb usb4: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.681905] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.682002] hub 4-0:1.0: USB hub found
[ 0.682005] hub 4-0:1.0: 2 ports detected
[ 0.682017] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[ 0.682020] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[ 0.682079] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.682083] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.682085] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.682090] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.682109] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 0.682133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682137] usb usb5: Product: UHCI Host Controller
[ 0.682138] usb usb5: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682139] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.682192] hub 5-0:1.0: USB hub found
[ 0.682195] hub 5-0:1.0: 2 ports detected
[ 0.682251] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.682255] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.682257] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.682262] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.682281] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.682303] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682304] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682306] usb usb6: Product: UHCI Host Controller
[ 0.682307] usb usb6: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682308] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.682360] hub 6-0:1.0: USB hub found
[ 0.682363] hub 6-0:1.0: 2 ports detected
[ 0.682414] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.682418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.682420] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.682429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.682448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.682470] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682471] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682473] usb usb7: Product: UHCI Host Controller
[ 0.682474] usb usb7: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682476] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.682528] hub 7-0:1.0: USB hub found
[ 0.682530] hub 7-0:1.0: 2 ports detected
[ 0.682580] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.682584] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.682587] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.682591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.682609] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.682631] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682633] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682634] usb usb8: Product: UHCI Host Controller
[ 0.682636] usb usb8: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682637] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.682688] hub 8-0:1.0: USB hub found
[ 0.682691] hub 8-0:1.0: 2 ports detected
[ 0.978184] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 0.995770] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.006371] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.098015] usb 2-4: New USB device found, idVendor=058f, idProduct=6362
[ 1.098018] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.098020] usb 2-4: Product: Mass Storage Device
[ 1.098022] usb 2-4: Manufacturer: Generic
[ 1.098024] usb 2-4: SerialNumber: 058F312D81B1
[ 1.102517] Initializing USB Mass Storage driver...
[ 1.102605] scsi6 : usb-storage 2-4:1.0
[ 1.102683] usbcore: registered new interface driver usb-storage
[ 1.102684] USB Mass Storage support registered.
[ 1.200008] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.314397] usb 2-5: New USB device found, idVendor=0424, idProduct=2504
[ 1.314400] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.314564] hub 2-5:1.0: USB hub found
[ 1.314649] hub 2-5:1.0: 4 ports detected
[ 1.442056] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.442068] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.443055] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.443068] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.448198] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.448203] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 1.448206] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.448615] ata1.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.448618] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.452202] ata1.00: configured for UDMA/133
[ 1.458509] ata1.01: configured for UDMA/133
[ 1.458613] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.458713] scsi 0:0:1:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.460337] ata2.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
[ 1.460340] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.460363] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[ 1.466539] ata2.00: configured for UDMA/133
[ 1.473136] ata2.01: configured for UDMA/100
[ 1.473517] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
[ 1.474167] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5
[ 1.640269] ahci 0000:03:00.0: version 3.0
[ 1.640285] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.648314] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.648346] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.648352] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.648370] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.648373] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.648386] sd 1:0:0:0: [sdc] Write Protect is off
[ 1.648388] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.648394] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648405] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648408] sd 0:0:0:0: [sda] Write Protect is off
[ 1.648410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.648425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648549] sdb:
[ 1.648623] sdc:
[ 1.652030] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.652032] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.652037] ahci 0000:03:00.0: setting latency timer to 64
[ 1.652165] scsi7 : ahci
[ 1.652230] scsi8 : ahci
[ 1.652311] ata7: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000100 irq 19
[ 1.652315] ata8: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000180 irq 19
[ 1.654437] sdc1
[ 1.659056] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.659058] Uniform CD-ROM driver Revision: 3.20
[ 1.659134] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 1.659144] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.660758] sdb1
[ 1.660808] sda: sda1 sda2 sda3 sda4
[ 1.661133] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.661154] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 1.661283] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.831656] usb 8-2: New USB device found, idVendor=046d, idProduct=c51a
[ 1.831659] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.831662] usb 8-2: Product: USB Receiver
[ 1.831664] usb 8-2: Manufacturer: Logitech
[ 1.847308] usbcore: registered new interface driver hiddev
[ 1.848873] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input1
[ 1.848912] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 1.853742] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input2
[ 1.853814] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 1.853871] usbcore: registered new interface driver usbhid
[ 1.853873] usbhid: USB HID core driver
[ 1.957024] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.957053] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.971328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.971356] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.971379] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.971399] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 2.103796] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.104433] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.105055] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.105690] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.106196] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.106453] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 2.106593] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 2.106737] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 2.110890] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 2.111725] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2.112286] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 2.112913] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 2.182190] device-mapper: uevent: version 1.0.3
-
Hallo
Sorry für das chaotische obere Post. In der Vorschau sieht es gut aus, nach absenden kommt dann aber der obere Schrott. Ich muss nun leider Weg, ich werde mich danach um eine bessere Darstellung bemühen.
Gruss
Beni
-
habs mal repariert.
greetz
devil
-
"mount /dev/sr0" kann ja gar nicht funktionieren, weil es kein /dev/sr0 in der fstab gibt, wie die Fehlermeldung ja auch korrekt lautet. Laut fstab müsste
mount /dev/cdrom funkionieren, allerdings auch nur, wenn es dieses Gerät im Ordner /dev auch tatsächlich gibt.
Ansonsten mal
mount /dev/sr0 /media/cdrom
probieren (als Root natürlich) und falls das funktioniert /dev/cdrom in der fstab durch /dev/sr0 ersetzen.
-
Hallo
@devil Danke für die Reparatur. So sieht das ganze schon viel besser aus.
@gerd
mount /dev/sr0 /media/cdrom
unter root ausgeführt hängt das Laufwerk ein. Allerdings dauert das sehr lange, so ca. 3min.
Ich habe wie von Dir vorgeschlagen den Eintrag in der fstab angepasst. Allerdings führt das zu keinem Automatischen mount. Ich habe danach einen Neustart gemacht, dies bringt aber keine Verbesserung.
Nur das mounten unter root mit dem oben genannten Befehl funktioniert.
Ach ja, ls /dev gibt autofs log sda2 tty tty32 tty57 usbdev8.2
block loop0 sda3 tty0 tty33 tty58 vboxdrv
bsg lp0 sda4 tty1 tty34 tty59 vboxnetctl
btrfs-control MAKEDEV sdb tty10 tty35 tty6 vcs
bus mapper sdb1 tty11 tty36 tty60 vcs1
cdrom1 mcelog sdc tty12 tty37 tty61 vcs2
cdrw1 mem sdc1 tty13 tty38 tty62 vcs3
char net sdd tty14 tty39 tty63 vcs4
console network_latency sde tty15 tty4 tty7 vcs5
core network_throughput sdf tty16 tty40 tty8 vcs6
cpu null sdg tty17 tty41 tty9 vcs7
cpu_dma_latency nvidia0 sg0 tty18 tty42 ttyS0 vcsa
disk nvidiactl sg1 tty19 tty43 ttyS1 vcsa1
dvd1 parport0 sg2 tty2 tty44 ttyS2 vcsa2
dvdrw1 port sg3 tty20 tty45 ttyS3 vcsa3
fb0 ppp sg4 tty21 tty46 urandom vcsa4
fd psaux sg5 tty22 tty47 usb vcsa5
full ptmx sg6 tty23 tty48 usbdev1.1 vcsa6
fuse pts sg7 tty24 tty49 usbdev2.1 vcsa7
gpmctl random shm tty25 tty5 usbdev3.1 vga_arbiter
hidraw0 rfkill snapshot tty26 tty50 usbdev4.1 xconsole
hidraw1 root snd tty27 tty51 usbdev5.1 zero
hpet rtc sndstat tty28 tty52 usbdev5.2
initctl rtc0 sr0 tty29 tty53 usbdev5.3
input scd0 stderr tty3 tty54 usbdev6.1
kmsg sda stdin tty30 tty55 usbdev7.1
kvm sda1 stdout tty31 tty56 usbdev8.1
aus.
Besten Dank für Deine Bemühungen.
Gruss
Beni
-
Das Problem wird übrigens auch hier (auf englisch besprochen, aber bisher ohne Lösung). http://aptosid.com/index.php?name=PNphpBB2&file=viewtopic&t=75
Wichtig wäre in der fstab das noauto durch ein auto zu ersetzen bzw. den Eintrag ganz zu entfernen (bzw. auszukommentieren) (wie im englisch-sprachigem Faden diskutiert). Allerdings dürfte das Problem damit nicht behoben sein.
-
Hallo gerd
besten Dank noch für den Link. Diesen habe ich noch nicht gesehen gehabt. Ich werde das ganze in dem Fall beobachten, ich hoffe das ändert in nächster Zeit.
Gruss
Beni
-
Das hab ich nicht erst seit dem Wechsel zu aptosid. Wenn ich es bei einem Rechner hab, hab das mit allen aktuellen Distributionen, nur mit älteren nicht. Ist von Rechner zu Rechner unterschiedlich. Wenn es einen Rechner betrifft, betrifft es alle eingebauten DVD-Laufwerke, egal ob SATA oder PATA. Bei mir besteht das Problem allerdings nur mit CDRs.
-
clubex schreibt im englischsprachigen Forum:
Es ist ein Fehler in KDE Gerät Anmelder https://bugs.kde.org/show_bug.cgi?id=245822 Schön zu wissen das mein System und mein CD / DVD-Laufwerk OK ist. Nun, es ist ein KDE Anmelder / Automounter Problem. Ich habe den gnome-volume-Management-und GNOME-Dateimanager Nautilus instaliert und dort nach dem Einlegen einer Daten CD / DVD öffnet Nautilus und zeigt den Inhalt der CD, platziert ein Symbol / Label in Nautilus Orte und erstellt einen Ordner in / media. So wie es unter KDE auch sein sollte.
Also müssen wir für ein Update warten. :roll:
Orginal msg:
There is a bug in kde device notifier
https://bugs.kde.org/show_bug.cgi?id=245822
Nice to know my system and my cd/dvd drive are OK.
By way of proving it's a KDE notifier/automounter problem I installed gnome-volume-management and gnome's filemanager nautilus. Inserting a data cd/dvd opened nautilus showing the contents of the cd, placed an icon/Label in nautilus's Places and created a folder in /media. all just as KDE should.
So we have to wait for a fix.