Siduction Forum
Siduction Forum => Scripting & Kernelhacking => Topic started by: piper on 2012/08/08, 19:07:13
-
I hope I posted this in the correct section, if not, please move ;)
It has been years since I burned a iso (my build, which is not very different to stock) to dvd.
I built from pyfll today and burnt it to dvd and upon boot it gives me an error.
Loading bootlogo ...
Error Setting up gfxboot
Then gives me an option of booting
Siduction_amd64
Boot_from_Hard_Disk
I had this problem before when building sidux, I can't for the life of me remember what I did to make the dvd boot.
This build works perfect when booting fromiso.
Any thoughts ?
I can post my "KDE desktop environment" if needed
thanks
-
You are not alone :) Mostly i need between 3-6 build if i change the pyfll settings for a releae. The question is: which sources for pyfll do you use? Do you have the needed packages in it? Most errors are made in this section:
166 FLL_WALLPAPER = "/usr/share/wallpapers/siduction-desperado-reloaded"
167 FLL_GFXBOOT_THEME = "12.1.1-desperado-reloaded"
174 FLL_DISTRO_VERSION = 12.1.1
These entries should match - if not, pyfll has no chance to get the needed datas for gfxboot in the buildchroot.
-
Thanks agaida, I will check when I get home frm work as I am about 300 miles away
-
Thanks agaida, that was the problem
FLL_WALLPAPER = "/usr/share/wallpapers/siduction-desperado"
FLL_GFXBOOT_THEME ="12.1-desperado"
FLL_DISTRO_VERSION = 12.1
My fault really as I use the same code for awhile, usually use as fromiso using toram so I don't notice the gfxboot error and me being too lazy to fix/upgrade it
danke