Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic:  boot stop/stalls usb mouse  (Read 10433 times)

anon_proxy

  • Guest
boot stop/stalls usb mouse
« on: 2013/11/24, 12:52:17 »
Hi all,

Since kernel-3.11.x series and beyond if my usb mouse is actually plugged in the boot just stops/stalls.  I experimented yesterday and found that if the usb mouse is not plugged into the small 4 port usb  hub then the boot is just fine.   Siduction is fine with the usb hub on startup, and once up and running the mouse is just recognised and working straight away when plugged into the hub.

Code: [Select]
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 761/M761 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:08.0 IDE interface: Silicon Integrated Systems [SiS] Device 0183 (rev 01)
00:0a.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
00:18.0 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: AMD/ATI [Advanced Micro Devices, Inc.] Turks PRO [Radeon HD 6570]
01:00.1 Audio device: AMD/ATI [Advanced Micro Devices, Inc.] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]

Dmesg when mouse connected

Code: [Select]
[ 6070.060814] usb 4-2.4: USB disconnect, device number 3
[ 6108.958826] usb 4-2.4: new low-speed USB device number 4 using ohci-pci
[ 6109.054821] usb 4-2.4: New USB device found, idVendor=04f3, idProduct=0234
[ 6109.054833] usb 4-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 6109.054839] usb 4-2.4: Product: OM
[ 6109.066630] input: OM as /devices/pci0000:00/0000:00:03.2/usb4/4-2/4-2.4/4-2.4:1.0/input/input5
[ 6109.067490] hid-generic 0003:04F3:0234.0002: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:03.2-2.4/input0

Its not a big thing as it can be got around as described, but this does not happen on other systems.

All the best....

Offline dibl

  • siduction community member
  • Global Moderator
  • User
  • *****
  • Posts: 2.345
    • Land of the Buckeye
Re: boot stop/stalls usb mouse
« Reply #1 on: 2013/11/24, 16:36:28 »
Question:  does the mouse interrupt boot when it is plugged directly into the USB port on the PC?
System76 Oryx Pro, Intel Core i7-11800H, SSD 970 EVO Plus;  Asus ROG STRIX X299-E, Core i7-7740X, Nvidia GTX-1060, dual monitors, SSD 860 EVO

anon_proxy

  • Guest
Re: boot stop/stalls usb mouse
« Reply #2 on: 2013/11/24, 17:49:57 »
Actually I did some more experimentation.  But that was curtailed as an another problem resurfaced.

Code: [Select]
ata4: SATA linkdown (SStatus 0 SControl 300)
Its at this point that I reinstalled grub into sda - lilo from slackware was replaced.

The problem has gone.  But why?  All other distros are fine with lilo (apart from pclinuxos) and that is nolonger installed.

Why does booting siduction with lilo cause problems for sid?

All the best...

Offline dibl

  • siduction community member
  • Global Moderator
  • User
  • *****
  • Posts: 2.345
    • Land of the Buckeye
Re: boot stop/stalls usb mouse
« Reply #3 on: 2013/11/24, 20:58:27 »
I don't think the siduction user community has a lot of LILO users ....


I have, at some point in the past, observed the type of "boot hangs on the USB interface" that you saw.  Google "lilo hangs on usb bus" and you will see quite a lot.  None of them suggest the issues are limited to Debian sid.   :)
System76 Oryx Pro, Intel Core i7-11800H, SSD 970 EVO Plus;  Asus ROG STRIX X299-E, Core i7-7740X, Nvidia GTX-1060, dual monitors, SSD 860 EVO

anon_proxy

  • Guest
Re: boot stop/stalls usb mouse
« Reply #4 on: 2013/11/25, 12:23:12 »
Hi

Doesnt do it for debian though either - that is does not hang/stop/freeze.

Cant find any info on the web no matter what search I do.

Trouble is I cant stand grub 2 anymore.

cheers

PS Why the captcha?  is not signing in using a username and password not enough anymore.  TMI my friend.  TMQ's.

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.838
Re: boot stop/stalls usb mouse
« Reply #5 on: 2013/11/25, 14:01:29 »
To be elabotrate on dibls post further up: does the mouse work, when it is plugged into the back ports  for USB? I have had problems booting with different usb-devices with a USB-switch and with the front usb-ports on the enclosure. This only happens, if 'Boot from USB' is enabled in the BIOS.


Besides that, for me, GRUB 2 just works for me. I only take notice of its existence when it upgrades.


greetz
devil

Offline melmarker

  • User
  • Posts: 2.799
    • g-com.eu
Re: boot stop/stalls usb mouse
« Reply #6 on: 2013/11/25, 17:47:26 »
PS Why the captcha?  is not signing in using a username and password not enough anymore.  TMI my friend.  TMQ's.

This is intentional - and only for the first 5 Posts. After these posts there are no more capchas.
Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. (Benjamin Franklin, November 11, 1755)
Never attribute to malice that which can be adequately explained by stupidity. (Hanlons razor)