Siduction Forum
Siduction Forum => Software - Support => Topic started by: unklarer on 2021/02/14, 10:21:38
-
das ist das System, was wegen Norbert Preining's Plasma aufgesetzt war, es wurde in der Vergangenheit täglich aktualisiert:
inxi -Sxr
System: Host: sidukde Kernel: 5.10.15-towo.1-siduction-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 Console: tty 1
Distro: siduction 18.3.0 Patience - kde - (202005041058) base: Debian GNU/Linux bullseye/sid
Repos: Packages: 2400
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/dbgsym.list
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ unstable main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/extra.list
1: deb http://packages.siduction.org/extra unstable main
Active apt repos in: /etc/apt/sources.list.d/fixes.list
1: deb https://packages.siduction.org/fixes unstable main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/obs-npreining-kde.list
1: deb https://download.opensuse.org/repositories/home:/npreining:/debian-kde:/apps2012/Debian_Unstable/ ./
Seit der Installation hatte ich beim Start des System Fehlermeldungen dieser Art, die sich auf das Installationsmedium
bezogen:Failed to start confirm this is a live system.
Diese hatte ich immer ignoriert, weil der eigentliche Start danach einsetzte und immer fehlerfrei verlief.
Vergangene Woche am 10. ist mir diese Fehlermeldung beim DU aufgefallen:
fll-live-initscripts (4.4.17) wird eingerichtet ...
A dependency job for fll-adduser.service failed. See 'journalctl -xe' for
details.
A dependency job for fll-fstab.service failed. See 'journalctl -xe' for details.
A dependency job for fll-cmdline.service failed. See 'journalctl -xe' for
details.
Job for fll-live.service failed.
See "systemctl status fll-live.service" and "journalctl -xe" for details.
A dependency job for fll-locales.service failed. See 'journalctl -xe' for
details.
A dependency job for fll-xdm.service failed. See 'journalctl -xe' for details.
Also nachgesehen
N: Es gibt 1 zusätzlichen Eintrag. Bitte verwenden Sie die Option »-a«, um ihn anzuzeigen.
root@sidukde:~# apt show fll-live-initscripts -a
Package: fll-live-initscripts
Version: 4.4.21
Priority: optional
Section: misc
Maintainer: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Installed-Size: 199 kB
Depends: adduser, console-setup, cpufrequtils, distro-defaults, eject, fll-live-utils, procps, keyboard-configuration, lsb-base, systemd-sysv (>= 217-2~)
Recommends: tzdata
Download-Size: 69,0 kB
APT-Sources: http://packages.siduction.org/extra unstable/main amd64 Packages
Description: fll live media sysv initscripts
A set of initscripts suitable for managing the SysV-Init boot sequence of the
live media generated by code from the F.U.L.L.S.T.O.R.Y project.
.
This is a FULLSTORY live-only package and must not be installed to an
ordinary system.
Package: fll-live-initscripts
Version: 4.4.13.6
Priority: optional
Section: misc
Maintainer: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Installed-Size: 198 kB
Depends: adduser, console-setup, cpufrequtils, distro-defaults, eject, fll-live-utils, procps, keyboard-configuration, lsb-base, systemd-sysv (>= 217-2~)
Recommends: tzdata
Download-Size: 68,7 kB
APT-Sources: http://packages.siduction.org/fixes unstable/main amd64 Packages
Description: fll live media sysv initscripts
A set of initscripts suitable for managing the SysV-Init boot sequence of the
live media generated by code from the F.U.L.L.S.T.O.R.Y project.
.
This is a FULLSTORY live-only package and must not be installed to an
ordinary system.
zu deutsch:
Beschreibung: fll live media sysv initscripts
Ein Satz von Initskripten, die für die Verwaltung der SysV-Init-Boot-Sequenz der Live-Medien, die durch Code aus dem F.U.L.L.S.T.O.R.Y-Projekt erzeugt werden.
.
Dies ist ein reines FULLSTORY-Live-Paket und darf nicht auf einem
normalen System installiert werden.
Der Text sagt alles und ich habe das Paket gepurgt. Die Meldungen am Anfang sind weg ;D doch seither bleibt das System bei
"started SDDM" stehen.
Wechsle ich auf tty2 etc. und update, rauscht eine Menge Meldungen vorbei nach dem Muster:
".../var/lib/apt/lists... Das Dateisystem ist nur lesbar" :(
Chroote ich in das System, kann ich normal das DU machen, den sddm gegen den lightdm wechseln, grub erneut in den PBR
installieren etc. pp.
Nur, starten läßt sich das nicht.
Ein Beinbruch ist es nicht, da @devil eh ein neues siduction angekündigt hat.
Jedoch würde ich schon gern wissen, ob sich das reparieren läßt, nur gehen mir die Ideen aus... ;)
-
cat /etc/sddm.conf
cat /etc/sddm.conf.d/kde_settings.conf
Sagt das bei dir irgendwas?
Die Frage ist auch, wie hast du fll-live-initscripts auf dein System bekommen, vor allem in so einer Version vom 10. Februar.
-
cat /etc/sddm.conf
sagt nichts, ist leer
/# cat /etc/sddm.conf.d/kde_settings.conf
[Autologin]
Relogin=false
Session=
User=
[General]
HaltCommand=/home/unklarer/systemctl poweroff -i
RebootCommand=/home/unklarer/systemctl reboot -i
[Theme]
Current=back-to-black
[Users]
MaximumUid=60000
MinimumUid=1000
Die Frage ist auch, wie hast du fll-live-initscripts auf dein System bekommen, vor allem in so einer Version vom 10. Februar.
Keine Ahnung.
Ich gehe davon aus, dass das Paket nach der Installation auf dem System verblieben ist. Calamares hatte zu der Zeit noch einen Fehler und ich mußte die Installation mit dem cli-installer machen.
Hypothese ist, dass das jetzt mit dem Paket procps "aktiviert" wurde. 8)
-
Also an der sddm config kann es eher nicht liegen, dass sddm nicht startet.
"Das Dateisystem ist nur lesbar"
Diese Meldung macht mir eher sorgen.
-
^Ja.
Diese Meldung passiert auf alle Kommandos auf tty.
Im chroot kann ich arbeiten. :D
-
Irgendein Dateissystem voll? Zeig mal bitte Ausgaben von
df -h]
sowie von mount]
In letzter Zeit irgendeine Partition die UUID geändert, passen 'cat /etc/fstab' und 'lsblk -fD' zueinander?
Noch weitere fll-* Reste vorhanden ( dpkg -l | grep fll )? Und die aktiven Repositories, inxi -r bitte ;)
-
/# df -h
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
/dev/sdb7 25G 9,1G 15G 39% /
tmpfs 796M 1,1M 795M 1% /run
udev 3,9G 0 3,9G 0% /dev
----------------------------------------------------------------------------
/# mount
/dev/sdb7 on / type ext4 (rw,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=814800k,mode=755)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,noexec,relatime,size=4056560k,nr_inodes=1014140,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
---------------------------------------------------------------------------
/# dpkg -l | grep fll*
ii flameshot 0.8.5-2 amd64 Powerful yet simple-to-use screenshot software
ii libcurl3-gnutls:amd64 7.74.0-1.1 amd64 easy-to-use client-side URL transfer library (GnuTLS flavour)
ii libcurl4:amd64 7.74.0-1.1 amd64 easy-to-use client-side URL transfer library (OpenSSL flavour)
ii libdeflate0:amd64 1.7-1 amd64 fast, whole-buffer DEFLATE-based compression and decompression
ii libdouble-conversion3:amd64 3.1.5-6.1 amd64 routines to convert IEEE floats to and from strings
ii libflac++6v5:amd64 1.3.3-2 amd64 Free Lossless Audio Codec - C++ runtime library
ii libflac8:amd64 1.3.3-2 amd64 Free Lossless Audio Codec - runtime C library
ii libflite1:amd64 2.2-2 amd64 Small run-time speech synthesis engine - shared libraries
ii libfluidsynth2:amd64 2.1.7-1 amd64 Real-time MIDI software synthesizer (runtime library)
ii libmpc3:amd64 1.2.0-1 amd64 multiple precision complex floating-point library
ii libmpdec3:amd64 2.5.1-1 amd64 library for decimal floating point arithmetic (runtime library)
ii libmpfr6:amd64 4.1.0-3 amd64 multiple precision floating-point computation
ii libsrt1.4-gnutls:amd64 1.4.2-1.3 amd64 Secure Reliable Transport UDP streaming library (GnuTLS flavour)
ii libssh-4:amd64 0.9.5-1 amd64 tiny C SSH library (OpenSSL flavor)
ii libssh-gcrypt-4:amd64 0.9.5-1 amd64 tiny C SSH library (gcrypt flavor)
ii libtag1v5-vanilla:amd64 1.11.1+dfsg.1-3 amd64 audio meta-data library - vanilla flavour
rc pkg-config 0.29.2-1 amd64 manage compile and link flags for libraries
ii usb-modeswitch 2.6.1-1 amd64 mode switching tool for controlling "flip flop" USB devices
---------------------------------------------------------------------------------
/# cat /etc/fstab
/dev/sda1 /disks/disk1part1 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sda6 /disks/disk1part6 vfat noauto,users,rw,quiet,umask=000 0 0
/dev/sda7 /disks/disk1part7 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sda8 /disks/disk1part8 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sda9 /disks/disk1part9 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sdb1 /disks/disk2part1 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sdb5 /disks/disk2part5 ext4 noauto,users,rw,exec,relatime 0 0
/dev/sdb6 /disks/disk2part6 vfat noauto,users,rw,quiet,umask=000 0 0
/dev/sdb7 /disks/disk2part7 ext4 noauto,users,rw,exec,relatime 0 0
--------------------------------------------------------------------------------
@der_bud
DANKE! Die fstab hatte ich bisher nicht kontrolliert. Nachdem ich sie "gerichtet" habe, ist alles wieder ok. ;D
-
Die Frage ist auch, wie hast du fll-live-initscripts auf dein System bekommen, vor allem in so einer Version vom 10. Februar.
Keine Ahnung.
Ich gehe davon aus, dass das Paket nach der Installation auf dem System verblieben ist. Calamares hatte zu der Zeit noch einen Fehler und ich mußte die Installation mit dem cli-installer machen.
Hypothese ist, dass das jetzt mit dem Paket procps "aktiviert" wurde. 8)
Ich habe jetzt die log's usw. befragt, laut patience-kde-amd64-latest.manifest(08.06.20) war das Paket auf der ISOfll-live-initscripts 4.4.13.6
und es gab updates ab hier:
Start-Date: 2021-02-06 17:08:18
Commandline: apt dist-upgrade....fll-live-initscripts:amd64 (4.4.13.6, 4.4.15)
Start-Date: 2021-02-10 17:25:07
Commandline: apt dist-upgrade....fll-live-initscripts:amd64 (4.4.15, 4.4.17)
Start-Date: 2021-02-11 15:47:14
Commandline: apt dist-upgrade....fll-live-initscripts:amd64 (4.4.17, 4.4.21)
Start-Date: 2021-02-11 15:53:24
Commandline: apt purge fll-live-initscripts
Purge: fll-live-initscripts:amd64 (4.4.21)
End-Date: 2021-02-11 15:53:29
Also, "Tragik der deutschen Abwehr" ;D ;D