Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: 3.3-6.towo.1 ACPI Warning -- lm-sensors issue?  (Read 2144 times)

Offline dibl

  • siduction community member
  • Global Moderator
  • User
  • *****
  • Posts: 2.145
    • Land of the Buckeye
3.3-6.towo.1 ACPI Warning -- lm-sensors issue?
« on: 2012/05/13, 12:56:48 »
I upgraded to the 3.3-6 towo kernel, and rebooted.  I saw a red warning fly by too fast to read during boot, so I reviewed /var/log/syslog.  In there I found this:

Code: [Select]
May 13 06:37:46 imerabox kernel: [   12.755051] w83627ehf: Found W83667HG chip at 0x290
May 13 06:37:46 imerabox kernel: [   12.755061] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120111/utaddress-251)
May 13 06:37:46 imerabox kernel: [   12.755066] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver


A google search indicates this was seen on kernel 3.2 but was allegedly fixed for 3.3.

My system is running great, and all the temps and sensors seem to be working, so this is just a curiosity, but I wanted to report it.  It is very possible this warning also existed with 3.3-5 -- I did not check the syslog for that one.

Code: [Select]
don@imerabox:~$ inxi -v3
System:    Host: imerabox Kernel: 3.3-6.towo.1-siduction-amd64 x86_64 (64 bit, gcc: 4.6.3)
           Desktop: KDE 4.7.4 (Qt 4.8.1) Distro: aptosid 2011-02 Ἡμέρα - kde-lite - (201107131633)
Machine:   Mobo: ASUSTeK model: P6X58D-E version: Rev 1.xx Bios: American Megatrends version: 0602 date: 03/24/2011
CPU:       Quad core Intel Core i7 CPU 950 (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 33734.1
           Clock Speeds: 1: 4216.767 MHz 2: 4216.767 MHz 3: 4216.767 MHz 4: 4216.767 MHz 5: 4216.767 MHz 6: 4216.767 MHz 7: 4216.767 MHz 8: 4216.767 MHz
Graphics:  Card: NVIDIA GF100 [GeForce GTX 480] bus-ID: 05:00.0 X.Org: 1.12.1 driver: nvidia Resolution: 1920x1200@50.0hz
           GLX Renderer: GeForce GTX 480/PCIe/SSE2 GLX Version: 4.2.0 NVIDIA 295.49 Direct Rendering: Yes
Network:   Card: Marvell 88E8056 PCI-E Gigabit Ethernet Controller driver: sky2 ver: 1.30 port: d800 bus-ID: 06:00.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 20:cf:30:5c:41:1d
Drives:    HDD Total Size: 2136.5GB (3.9% used) 1: model: OCZ
           2: model: OCZ 3: model: KINGSTON_SS100S2 4: model: WDC_WD1002FAEX 5: model: WDC_WD1002FAEX
Info:      Processes: 289 Uptime: 17 min Memory: 1358.0/5966.5MB Runlevel: 5 Gcc sys: 4.7.0 Client: Shell inxi: 1.7.36
Asus ROG STRIX X299-E, Core i7-7740X, Nvidia GTX-1060, dual monitors, SSD 860 EVO, 2@WD2003FZEX in BTRFS