Author Topic: [DE] Probleme beim booten (Read 6178 times)

ayla · « **on:** 2012/08/21, 11:00:43 »

Hallo,

seit einiger Zeit, ich kann es leider nicht mehr an irgend einem d-u festmachen, bekomme ich beim booten folgende Meldung und der Rechner bleibt dann gelegentlich hängen. Reset erforderlich, manchmal mehrfach.
Ich bin leider auch nicht sicher ob diese Meldungen tatsächlich im Zusammenhang mit dem hängen bleiben stehen, da sie auch im log auftauchen wenn ich normal booten kann.

Quote

ACPI warning 0x...0500-0x...057f SystemIO conflicts with region \GPIO 1 (20120320/utadress-251)
ACPI warning 0x...0500-0x...057f SystemIO conflicts with region \_GPE.GPIO 1 (20120320/utadress-251)
.
.
.
ACPI warning 0x...f040-0x...f05f SystemIO conflicts with region \_SB_.PCIO.SBOS.SMBI 1 (20120320/utadress-251)

Gestern hatte ich ein BIOS-update gemacht, keine Änderung.

Hier die entsprechende Stelle aus /var/log/messages wenn das System trotz dieser Meldungen bootet. Muß ich resetten habe ich leider auch kein log.

Code: [Select]

Aug 21 08:19:31 nescaya kernel: [    5.200814] wmi: Mapper loaded
Aug 21 08:19:31 nescaya kernel: [    5.201580] ACPI: Requesting acpi_cpufreq
Aug 21 08:19:31 nescaya kernel: [    5.205551] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
Aug 21 08:19:31 nescaya kernel: [    5.205606] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Aug 21 08:19:31 nescaya kernel: [    5.206902] agpgart-intel 0000:00:00.0: detected 524288K stolen memory
Aug 21 08:19:31 nescaya kernel: [    5.206981] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Aug 21 08:19:31 nescaya kernel: [    5.208699] [drm] Initialized drm 1.1.0 20060810
Aug 21 08:19:31 nescaya kernel: [    5.209839] mei 0000:00:16.0: wd: failed to find the client
Aug 21 08:19:31 nescaya kernel: [    5.216837] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
Aug 21 08:19:31 nescaya kernel: [    5.216842] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 21 08:19:31 nescaya kernel: [    5.217942] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Aug 21 08:19:31 nescaya kernel: [    5.229107] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.233728] cfg80211: Calling CRDA to update world regulatory domain
Aug 21 08:19:31 nescaya kernel: [    5.242880] input: PC Speaker as /devices/platform/pcspkr/input/input3
Aug 21 08:19:31 nescaya kernel: [    5.250425] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 21 08:19:31 nescaya kernel: [    5.261644] asus_wmi: ASUS WMI generic driver loadedasus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9asus_wmi: SFUN value: 0x0<6>[    5.262533] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input4
Aug 21 08:19:31 nescaya kernel: [    5.263137] asus_wmi: Backlight controlled by ACPI video driver
Aug 21 08:19:31 nescaya kernel: [    5.271249] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5:1.0/input/input5
Aug 21 08:19:31 nescaya kernel: [    5.271306] hid-generic 0003:046D:C50E.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
Aug 21 08:19:31 nescaya kernel: [    5.271421] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.0/input/input6
Aug 21 08:19:31 nescaya kernel: [    5.271488] hid-generic 0003:046D:C505.0006: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input0
Aug 21 08:19:31 nescaya kernel: [    5.271700] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.1/input/input7
Aug 21 08:19:31 nescaya kernel: [    5.271793] hid-generic 0003:046D:C505.0007: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input1
Aug 21 08:19:31 nescaya kernel: [    5.427339] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.429881] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.431190] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.432238] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.433226] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.434300] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.435630] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x26
Aug 21 08:19:31 nescaya kernel: [    5.436675] microcode: Microcode Update Driver: v2.00 <tigran>, Peter Oruba
Aug 21 08:19:31 nescaya kernel: [    5.653531] cfg80211: World regulatory domain updated:
Aug 21 08:19:31 nescaya kernel: [    5.653532] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 21 08:19:31 nescaya kernel: [    5.653533] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.653534] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.653535] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.653536] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.653537] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.818679] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90006320000, irq=19
Aug 21 08:19:31 nescaya kernel: [    5.818836] cfg80211: Calling CRDA for country: AM
Aug 21 08:19:31 nescaya kernel: [    5.821098] cfg80211: Regulatory domain changed to country: AM
Aug 21 08:19:31 nescaya kernel: [    5.821099] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 21 08:19:31 nescaya kernel: [    5.821100] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.821100] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
Aug 21 08:19:31 nescaya kernel: [    5.821101] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
Aug 21 08:19:31 nescaya kernel: [    6.336149] Console: switching to colour dummy device 80x25
Aug 21 08:19:31 nescaya kernel: [    6.355630] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Aug 21 08:19:31 nescaya kernel: [    6.355634] [drm] Driver supports precise vblank timestamp query.
Aug 21 08:19:31 nescaya kernel: [    6.355669] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 21 08:19:31 nescaya kernel: [    6.481597] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Aug 21 08:19:31 nescaya kernel: [    6.764868] fbcon: inteldrmfb (fb0) is primary device
Aug 21 08:19:31 nescaya kernel: [    7.187057] Console: switching to colour frame buffer device 240x67
Aug 21 08:19:31 nescaya kernel: [    7.195633] fb0: inteldrmfb frame buffer device
Aug 21 08:19:31 nescaya kernel: [    7.195653] drm: registered panic notifier
Aug 21 08:19:31 nescaya kernel: [    7.196367] acpi device:3e: registered as cooling_device13
Aug 21 08:19:31 nescaya kernel: [    7.196637] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Aug 21 08:19:31 nescaya kernel: [    7.196767] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
Aug 21 08:19:31 nescaya kernel: [    7.196940] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug 21 08:19:31 nescaya kernel: [    7.197080] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
Aug 21 08:19:31 nescaya kernel: [    7.197191] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 21 08:19:31 nescaya kernel: [    7.197244] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
Aug 21 08:19:31 nescaya kernel: [    7.197278] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
Aug 21 08:19:31 nescaya kernel: [    7.197356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 21 08:19:31 nescaya kernel: [    7.197431] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
Aug 21 08:19:31 nescaya kernel: [    7.197501] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_GPE.GPIO 2 (20120320/utaddress-251)
Aug 21 08:19:31 nescaya kernel: [    7.197574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Aug 21 08:19:31 nescaya kernel: [    7.197633] lpc_ich: Resource conflict(s) found affecting gpio_ich
Aug 21 08:19:31 nescaya kernel: [    7.743014] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Aug 21 08:19:31 nescaya kernel: [    7.743258] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Aug 21 08:19:31 nescaya kernel: [    7.743492] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Aug 21 08:19:31 nescaya kernel: [    7.743691] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Aug 21 08:19:31 nescaya kernel: [    7.743893] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Aug 21 08:19:31 nescaya kernel: [    7.744099] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Aug 21 08:19:31 nescaya kernel: [    7.744302] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Aug 21 08:19:31 nescaya kernel: [    7.744523] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
Aug 21 08:19:31 nescaya kernel: [    7.744731] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
Aug 21 08:19:31 nescaya kernel: [    7.744937] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
A

Code: [Select]

System:    Host: nescaya Kernel: 3.5-2.towo-siduction-amd64 x86_64 (64 bit, gcc: 4.7.1) 
           Desktop: KDE 4.8.4 (Qt 4.8.2) Distro: siduction 12.1.1 Desperado Reloaded - kde - (201206241901)
Machine:   Mobo: ASUSTeK model: P8Z68-V LE version: Rev X.0x Bios: American Megatrends version: 3808 date: 05/10/2012
CPU:       Quad core Intel Core i7-2600K CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 27289 
           Clock Speeds: 1: 1600.00 MHz 2: 3401.00 MHz 3: 1600.00 MHz 4: 1600.00 MHz 5: 1600.00 MHz 6: 1600.00 MHz 7: 1600.00 MHz 8: 1600.00 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0 
           X.Org: 1.12.3 drivers: intel (unloaded: fbdev,vesa) Resolution: 1920x1080@60.0hz, 1920x1080@59.9hz

Hat jemand einen Tipp was da schief läuft, wie ich den Fehler eingrenzen könnte?

Gruß
ayla

Geier0815 · « **Reply #1 on:** 2012/08/21, 11:11:41 »

ACPI im Bios mal deaktiviert? Mal geguckt ob Du da etwas einstellen kannst?

devil · « **Reply #2 on:** 2012/08/21, 11:14:21 »

Hast du noch ältere Kernel (3.0 - 3.3)? Falls ja, teste mal bitte und checke die Logs.
siehe auch: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683167

Interessant wäre auch ein:

Code: [Select]

cat /proc/ioports | grep -i it87

greetz
devil

ayla · « **Reply #3 on:** 2012/08/21, 13:11:49 »

Hallo,

@geier0815: Hab bis jetzt noch keine Einstellungen im BIOS entdeckt die das ändern. acpi=off/force usw. wollte ich erst nach der Rückfrage hier -falls ergebnislos- testen weil ich mir über die Auswirkungen nicht auch nur annähernd klar bin.

@devil: yupp, hab noch ein paar 3.1er in einem alten Rettungssystem entdeckt und den

Code: [Select]

3.1-2.towo.2-siduction-amd64 #1 SMP PREEMPT Tue Nov 22 11:27:17 UTC 2011 x86_64 GNU/Linux per dpkg und apt-get -f install installiert. Mehrere reboots (>10) problemlos.

Code: [Select]

cat /proc/ioports | grep -i it87 bringt weder beim alten noch beim neuen System ein Ergebnis.

Messages zeigt die verdächtigen Warnungen mit dem 3.1-2 nicht mehr.
Der entsprechende Bereich:

Code: [Select]

Aug 21 11:36:05 nescaya kernel: [    3.427607] usbcore: registered new interface driver usbhid
Aug 21 11:36:05 nescaya kernel: [    3.427608] usbhid: USB HID core driver
Aug 21 11:36:05 nescaya kernel: [    3.919947] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 21 11:36:05 nescaya kernel: [    3.920145] scsi 4:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
Aug 21 11:36:05 nescaya kernel: [    3.920890] scsi 4:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
Aug 21 11:36:05 nescaya kernel: [    3.921420] sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 21 11:36:05 nescaya kernel: [    3.921453] sr 0:0:1:0: Attached scsi generic sg1 type 5
Aug 21 11:36:05 nescaya kernel: [    3.921485] sd 1:0:0:0: Attached scsi generic sg2 type 0
Aug 21 11:36:05 nescaya kernel: [    3.921520] sd 1:0:1:0: Attached scsi generic sg3 type 0
Aug 21 11:36:05 nescaya kernel: [    3.921552] sd 2:0:0:0: Attached scsi generic sg4 type 0
Aug 21 11:36:05 nescaya kernel: [    3.921643] scsi 4:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
Aug 21 11:36:05 nescaya kernel: [    3.922391] scsi 4:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9602 PQ: 0 ANSI: 0
Aug 21 11:36:05 nescaya kernel: [    3.922424] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922461] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922494] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922526] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922559] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922592] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922623] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922655] scsi: killing requests for dead queue
Aug 21 11:36:05 nescaya kernel: [    3.922768] sd 4:0:0:0: Attached scsi generic sg5 type 0
Aug 21 11:36:05 nescaya kernel: [    3.922903] sd 4:0:0:1: Attached scsi generic sg6 type 0
Aug 21 11:36:05 nescaya kernel: [    3.923038] sd 4:0:0:2: Attached scsi generic sg7 type 0
Aug 21 11:36:05 nescaya kernel: [    3.923434] sd 4:0:0:3: Attached scsi generic sg8 type 0
Aug 21 11:36:05 nescaya kernel: [    3.925885] sd 4:0:0:0: [sde] Attached SCSI removable disk
Aug 21 11:36:05 nescaya kernel: [    3.926504] sd 4:0:0:1: [sdf] Attached SCSI removable disk
Aug 21 11:36:05 nescaya kernel: [    3.938625] sd 4:0:0:2: [sdg] Attached SCSI removable disk
Aug 21 11:36:05 nescaya kernel: [    3.940522] sd 4:0:0:3: [sdh] Attached SCSI removable disk
Aug 21 11:36:05 nescaya kernel: [    4.815116] Refined TSC clocksource calibration: 3411.127 MHz.
Aug 21 11:36:05 nescaya kernel: [    4.830717] Switching to clocksource tsc
Aug 21 11:36:05 nescaya kernel: [    5.473326] md: raid1 personality registered for level 1
Aug 21 11:36:05 nescaya kernel: [    5.532770] md: md0 stopped.
Aug 21 11:36:05 nescaya kernel: [    5.545562] md: bind<sdd4>
Aug 21 11:36:05 nescaya kernel: [    5.557272] md: bind<sdc7>
Aug 21 11:36:05 nescaya kernel: [    5.568904] bio: create slab <bio> at 1
Aug 21 11:36:05 nescaya kernel: [    5.579320] md/raid1:md0: active with 2 out of 2 mirrors
Aug 21 11:36:05 nescaya kernel: [    5.589560] md0: detected capacity change from 0 to 552690638848
Aug 21 11:36:05 nescaya kernel: [    5.600087]  md0: unknown partition table
Aug 21 11:36:05 nescaya kernel: [    5.838827] device-mapper: uevent: version 1.0.3
Aug 21 11:36:05 nescaya kernel: [    5.848514] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
Aug 21 11:36:05 nescaya kernel: [    5.906611] Btrfs loaded
Aug 21 11:36:05 nescaya kernel: [    6.202356] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Aug 21 11:36:05 nescaya kernel: [    6.551262] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
Aug 21 11:36:05 nescaya kernel: [    6.551348] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Aug 21 11:36:05 nescaya kernel: [    6.552842] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
Aug 21 11:36:05 nescaya kernel: [    6.552849] ACPI: Power Button [PWRB]
Aug 21 11:36:05 nescaya kernel: [    6.552885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
Aug 21 11:36:05 nescaya kernel: [    6.552887] ACPI: Power Button [PWRF]
Aug 21 11:36:05 nescaya kernel: [    6.552959] agpgart-intel 0000:00:00.0: detected 524288K stolen memory
Aug 21 11:36:05 nescaya kernel: [    6.553095] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Aug 21 11:36:05 nescaya kernel: [    6.553220] wmi: Mapper loaded
Aug 21 11:36:05 nescaya kernel: [    6.555520] [drm] Initialized drm 1.1.0 20060810
Aug 21 11:36:05 nescaya kernel: [    6.557041] mei: module is from the staging directory, the quality is unknown, you have been warned.
Aug 21 11:36:05 nescaya kernel: [    6.557730] mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Aug 21 11:36:05 nescaya kernel: [    6.593610] iTCO_vendor_support: vendor-support=0
Aug 21 11:36:05 nescaya kernel: [    6.594276] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Aug 21 11:36:05 nescaya kernel: [    6.595247] cfg80211: Calling CRDA to update world regulatory domain
Aug 21 11:36:05 nescaya kernel: [    6.602357] input: PC Speaker as /devices/platform/pcspkr/input/input7
Aug 21 11:36:05 nescaya kernel: [    6.694437] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 21 11:36:05 nescaya kernel: [    6.697611] asus_wmi: ASUS WMI generic driver loaded
Aug 21 11:36:05 nescaya kernel: [    6.699081] asus_wmi: Initialization: 0x0
Aug 21 11:36:05 nescaya kernel: [    6.699104] asus_wmi: BIOS WMI version: 0.9
Aug 21 11:36:05 nescaya kernel: [    6.699145] asus_wmi: SFUN value: 0x0
Aug 21 11:36:05 nescaya kernel: [    6.699385] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
Aug 21 11:36:05 nescaya kernel: [    6.700031] asus_wmi: Backlight controlled by ACPI video driver
Aug 21 11:36:05 nescaya kernel: [    6.700829] ath9k 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Aug 21 11:36:05 nescaya kernel: [    6.713220] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
Aug 21 11:36:05 nescaya kernel: [    6.713279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Aug 21 11:36:05 nescaya kernel: [    6.715663] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 21 11:36:05 nescaya kernel: [    6.735013] cfg80211: World regulatory domain updated:
Aug 21 11:36:05 nescaya kernel: [    6.735015] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 21 11:36:05 nescaya kernel: [    6.735017] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.735019] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.735020] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.735022] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.735023] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.846968] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc900060a0000, irq=19
Aug 21 11:36:05 nescaya kernel: [    6.847084] cfg80211: Calling CRDA for country: AM
Aug 21 11:36:05 nescaya kernel: [    6.850320] cfg80211: Regulatory domain changed to country: AM
Aug 21 11:36:05 nescaya kernel: [    6.850322] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 21 11:36:05 nescaya kernel: [    6.850324] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.850326] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
Aug 21 11:36:05 nescaya kernel: [    6.850328] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
Aug 21 11:36:05 nescaya kernel: [    7.248999] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Aug 21 11:36:05 nescaya kernel: [    7.249795] [drm] Driver supports precise vblank timestamp query.
Aug 21 11:36:05 nescaya kernel: [    7.250593] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 21 11:36:05 nescaya kernel: [    7.831089] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Aug 21 11:36:05 nescaya kernel: [    7.831907] Console: switching to colour dummy device 80x25
Aug 21 11:36:05 nescaya kernel: [    7.832215] fbcon: inteldrmfb (fb0) is primary device
Aug 21 11:36:05 nescaya kernel: [    8.253749] Console: switching to colour frame buffer device 240x67
Aug 21 11:36:05 nescaya kernel: [    8.258277] fb0: inteldrmfb frame buffer device
Aug 21 11:36:05 nescaya kernel: [    8.258296] drm: registered panic notifier
Aug 21 11:36:05 nescaya kernel: [    8.271367] acpi device:3e: registered as cooling_device13
Aug 21 11:36:05 nescaya kernel: [    8.271521] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
Aug 21 11:36:05 nescaya kernel: [    8.271658] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
Aug 21 11:36:05 nescaya kernel: [    8.271734] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug 21 11:36:05 nescaya kernel: [    8.271838] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Aug 21 11:36:05 nescaya kernel: [    8.271928] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Aug 21 11:36:05 nescaya kernel: [    8.791488] hda_codec: ALC892: BIOS auto-probing.
Aug 21 11:36:05 nescaya kernel: [    8.795856] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Aug 21 11:36:05 nescaya kernel: [    8.796336] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
Aug 21 11:36:05 nescaya kernel: [    8.799852] HDMI: detected monitor  at connection type HDMI
Aug 21 11:36:05 nescaya kernel: [    8.799875] HDMI: available speakers: FL/FR
Aug 21 11:36:05 nescaya kernel: [    8.799893] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
Aug 21 11:36:05 nescaya kernel: [   10.805548] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
Aug 21 11:36:05 nescaya kernel: [   10.805623] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
Aug 21 11:36:05 nescaya kernel: [   10.805866] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Aug 21 11:36:05 nescaya kernel: [   10.805945] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Aug 21 11:36:05 nescaya kernel: [   10.806017] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Aug 21 11:36:05 nescaya kernel: [   10.809161] HDMI: detected monitor  at connection type HDMI
Aug 21 11:36:05 nescaya kernel: [   10.809185] HDMI: available speakers: FL/FR
Aug 21 11:36:05 nescaya kernel: [   10.809203] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
Aug 21 11:36:05 nescaya kernel: [   10.809270] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
Aug 21 11:36:05 nescaya kernel: [   10.809328] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
Aug 21 11:36:05 nescaya kernel: [   10.812845] HDMI: detected monitor  at connection type HDMI
Aug 21 11:36:05 nescaya kernel: [   10.812868] HDMI: available speakers: FL/FR
Aug 21 11:36:05 nescaya kernel: [   10.812885] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16
Aug 21 11:36:05 nescaya kernel: [   12.580426] Adding 2097140k swap on /dev/sda4.  Priority:-1 extents:1 across:2097140k SS
Aug 21 11:36:05 nescaya kernel: [   12.589087] EXT4-fs (sda1): re-mounted. Opts: (null)
Aug 21 11:36:05 nescaya kernel: [   12.785297] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro

Ich _glaube_ ja nicht dass, wie in dem bugreport erwähnt, das Xorg.0.log hier von Interesse sein könnte, das steigt ja erst viel später im Prozess ein, kanns aber natürlich gerne nachliefern, falls erforderlich. Aber in dem Report auf den in dem von Dir verlinkten verwiesen wird:
https://bugs.freedesktop.org/show_bug.cgi?id=53222

Quote

Chris Wilson 2012-08-12 13:18:20 UTC

Aha! Indeed libdrm is out-of-date, you need libdrm 2.4.34 (or a backport of the
PCI ID patch, or a backport of the assertion removal).

Code: [Select]

root@nescaya:/home/cal# apt-cache policy libdrm2
libdrm2:
  Installiert:           2.4.33-3
  Installationskandidat: 2.4.33-3
  Versionstabelle:
 *** 2.4.33-3 0
        500 http://http.debian.net/debian/ unstable/main amd64 Packages
        100 /var/lib/dpkg/status
root@nescaya:/home/cal# apt-cache policy libdrm-intel1
libdrm-intel1:
  Installiert:           2.4.33-3
  Installationskandidat: 2.4.33-3
  Versionstabelle:
 *** 2.4.33-3 0
        500 http://http.debian.net/debian/ unstable/main amd64 Packages
        100 /var/lib/dpkg/status

Ich schau mal ob ich die 2.4.34... in experimental finde und teste mal, falls ja, auch wenn ich das eigentlich so verstehe daß dort irgendwas von der Ivy Bridge gefehlt hatte und auch -bei mir- die "Umschaltung" des framebuffer oder KMS oder was auch immer (Änderung der Schriftart, kurzes Aussetzen) zum Zeitpunkt des Fehlers noch nicht stattgefunden hat. Es wäre aber ziemlich bald danach fällig.

devil · « **Reply #4 on:** 2012/08/21, 13:43:24 »

Vielleicht hat towo noch ne idee dazu...

greetz
devil

ayla · « **Reply #5 on:** 2012/08/21, 17:45:57 »

Quote from: "devil"

Vielleicht hat towo noch ne idee dazu...

Ja, das wäre schön... und nachdem ich keine neuere Version der libdrm2/-intel1 in experimental gefunden habe wohl auch die letzte Hoffnung da ohne wildes experimentieren weiter zu kommen.

towo · « **Reply #6 on:** 2012/08/21, 17:50:21 »

Das leidige Problem mit diesen Messages ist, daß sie in einer Kernel-Version da sind, in der nächsten wieder nicht.
Ich gehe recht in der Annahme, daß wir von einem Notebook reden?

ayla · « **Reply #7 on:** 2012/08/21, 18:09:57 »

Hallo towo,

nein, das ist mein Desktop.

ayla · « **Reply #8 on:** 2012/08/22, 00:11:52 »

Ich versuche mal noch ein paar Infos zusammen zu kratzen die das System näher beschreiben.

4 Festplatten, 2x SSD a 60GB, 2x 1TB HD.

Die eine SSD (Vertex3) ist mit GPT versehen, nach devils Anleitung und hält das aktuelle Siduction als mein Hauptsystem am SATA3-Port(/root,/home,/data,/swap). /var ist ausgelagert auf eine der normalen HDs.

Die zweite, eine Agility2 muß momentan mit einem winXP klarkommen. (SATA3)

Die beiden TB Platten tragen auf der jeweils 2.Hälfte meine gesicherten Daten auf einem Softwaremirror (mdadm). (SATA2)

Netzwerk über WLAN, Atheros AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) driver: ath9k bus-ID: 03:00.0

Das MB erlaubt einen Turbomodus den ich aber nicht brauche und normalerweise auch nicht benutze. Das RAM und die CPU sind für den Turbomodus ausgelegt.

Laufzeit zwischen 5 und 13 h/Tag, hat anscheinend keinen Einfluss auf die Häufigkeit des Auftretens des Hängers.

Code: [Select]

lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)                                       
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)                     
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)          
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)                         
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
03:00.0 Network controller: Atheros Communications Inc. AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) (rev 01)
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01)

Code: [Select]

 lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05e3:070e Genesys Logic, Inc. USB 2.0 Card Reader
Bus 002 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 002 Device 005: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver

Code: [Select]

UUID=96fd8299-009b-4512-9a32-4d901b9d5f60     /                    ext4         defaults,noatime,discard,errors=remount-ro           0    1   
UUID=7a40ec3c-af9d-4818-ba60-c0140384f68a     /home                ext4         defaults,noatime,discard,errors=remount-ro           0    2   
UUID=8ba00c8a-214c-45cb-a34d-762b82914fc2     /data                ext4         defaults,noatime,discard,errors=remount-ro           0    2   
UUID=901cf65b-e2a4-4b44-90f6-59ecb95f4e52     none                 swap         sw                                            0    0   
UUID=FA941F82941F4095                         /win                 ntfs-3g      defaults  0    0   
UUID=81522019-fff5-4511-a87c-45127560dc51     /var                 ext4         defaults,relatime,errors=remount-ro           0    2   
UUID=f7bd208e-a3f4-4206-82da-378b4b86f818     /media/disk3part2    ext4         auto,users,rw,exec,relatime                   0    0   
UUID=627f81a1-9c1c-42ec-8e00-2daec824fb4e     /media/disk3part3    ext4         auto,users,rw,exec,relatime                   0    0   
#UUID=a6bbf214-a5db-41ca-ae2b-e2dc9fac0132     /tmp/partinfo-mount  ext4         defaults,relatime,errors=remount-ro           0    2   
UUID=3c21a6ba-a453-4b66-9161-1b1a9ed0a3e7     /media/disk3part6    ext4         auto,users,rw,exec,relatime                   0    0   
UUID=419676a8-3741-477c-b95d-ca24c2cecd3b     /media/disk4part1    ext4         auto,users,rw,exec,relatime                   0    0   
UUID=9043a15c-ef26-4b5c-9a5b-a06e9a6b444b     /media/disk4part2    ext4         auto,users,rw,exec,relatime                   0    0   
UUID=f8d6d47f-5c11-4b4b-9f23-f3d219441a61     /media/disk4part3    ext4         auto,users,rw,exec,relatime                   0    0   
UUID=af61a476-63c2-4cae-bb6b-39003c2c4888     /mirror 		   ext4         auto,users,rw,exec,relatime                   0    0   
tmp 						/tmp 		  tmpfs 	defaults,nodev,nosuid,size=4G,mode=1777 		0 0
shm 						/run/shm 	  tmpfs 	defaults,noatime 0 0

ayla · « **Reply #9 on:** 2012/08/25, 11:18:14 »

hmm...

Das scheint irgendwie mit dem SATA-Controller zusammen zu hängen.

Die Hänger treten sehr häufig auf wenn ich den im BIOS auf IDE eingestellt habe (bei ca zwei Drittel der reboots), aber relativ selten wenn der auf AHCI-Modus steht (max einer von zehn).

Blöderweise brauch ich den IDE-Modus im Moment noch für ein WinXP bis ich ein Projekt für meine Arbeit über die Bühne hab.
Komischerweise treten beim XP keine Boot-Probleme auf...

ralul · « **Reply #10 on:** 2012/08/25, 15:57:01 »

Geht das veraltete WinXp nicht per Virtualbox oder sogar vmware?

ayla · « **Reply #11 on:** 2012/08/25, 16:07:11 »

Das XP schon, hatte eins in einer Virtualbox am Laufen, aber ich hatte da Probleme mit der Verarbeitung des PAL-Signal eines Grabbers -oder das überhaupt rein zu bekommen, weiß nicht mehr was es genau war.

ralul · « **Reply #12 on:** 2012/08/25, 19:16:46 »

Ah, ja, du machst ja noch PAL Video Konvertierungen ...
Sowas Hardware Nahes - und dann noch veraltete Technik - würde ich allerdings auch nicht in einer Virtuellen Box machen.