Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: [EN] Siduction boots to BIOS instead of operating system after shutdown  (Read 4452 times)

Offline Muzzle2010

  • User
  • Posts: 5
I recently installed Siduction Linux and overall it was working very well. The installation process went smoothly and I'm happy with the performance so far.

However, I've run into an annoying issue when shutting down and restarting my computer. After I shut down from Siduction, my computer boots straight into the BIOS instead of loading Siduction. I then have to go into my BIOS settings, and manually select the boot device and boot path to get Siduction loading again.

Before installing Siduction, I was running Kubuntu which never had this issue. Kubuntu would always boot straight back into the operating system after a restart or shutdown.

I'm not very experienced with troubleshooting boot issues, so I'm not sure what could be causing Siduction to keep dropping out of the boot path on restart. My laptop is ASUS UX305UA, and I don't dual-boot.

I have went back to Kubuntu but if this issue can be solved, I would very much like to return to Siduction.

Code: [Select]
firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: UX305UA.201
          date: 10/12/2015
          size: 64KiB
          capacity: 6016KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification uefi
« Last Edit: 2023/08/28, 14:33:51 by Muzzle2010 »

Offline Mister00X

  • User
  • Posts: 198
What is the output of
Code: [Select]
# efibootmgr
Also could you provide us with the output of
Code: [Select]
# inxi -Fz
Arguing that you don't care about the right to privacy because you have nothing to hide is no different than saying you don't care about free speech because you have nothing to say. – Edward Snowden

Offline Muzzle2010

  • User
  • Posts: 5
What is the output of
Code: [Select]
# efibootmgr
Also could you provide us with the output of
Code: [Select]
# inxi -Fz

I am back on Kubuntu so the results might not be applicable but for what it is worth,
Code: [Select]
BootCurrent: 0001
Timeout: 1 seconds
BootOrder: 0001,0002,0003,0004
Boot0001* ubuntu
Boot0002* UEFI:CD/DVD Drive
Boot0003* UEFI:Removable Device
Boot0004* UEFI:Network Device

Code: [Select]
System:
  Kernel: 6.1.49-x64v3-xanmod1 x86_64 bits: 64 Desktop: KDE Plasma 5.24.7
    Distro: Ubuntu 22.04.3 LTS (Jammy Jellyfish)
Machine:
  Type: Laptop System: ASUSTeK product: UX305UA v: 1.0 serial: <filter>
  Mobo: ASUSTeK model: UX305UA v: 1.0 serial: <filter>
    UEFI: American Megatrends v: UX305UA.201 date: 10/12/2015
Battery:
  ID-1: BAT0 charge: 0 Wh (0.0%) condition: 13.6/56.0 Wh (24.3%) volts: 11.3
    min: 11.3
CPU:
  Info: dual core model: Intel Core i7-6500U bits: 64 type: MT MCP cache:
    L2: 512 KiB
  Speed (MHz): avg: 2725 min/max: 400/3100 cores: 1: 2600 2: 3100 3: 2600
    4: 2600
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] driver: i915 v: kernel
  Device-2: Realtek USB2.0 HD UVC WebCam type: USB driver: uvcvideo
  Display: server: X.Org v: 1.21.1.4 driver: X: loaded: modesetting
    unloaded: fbdev,vesa gpu: i915 resolution: 1920x1080~60Hz
  OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2)
    v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
  Sound Server-1: ALSA v: k6.1.49-x64v3-xanmod1 running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Wireless 7265 driver: iwlwifi
  IF: wlp2s0 state: up mac: <filter>
  IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
  IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb
  Report: hciconfig ID: hci0 state: up address: <filter> bt-v: 2.1
Drives:
  Local Storage: total: 476.94 GiB used: 185.53 GiB (38.9%)
  ID-1: /dev/sda vendor: SK Hynix model: HFS512G39MND-3510A
    size: 476.94 GiB
Partition:
  ID-1: / size: 464.35 GiB used: 185.25 GiB (39.9%) fs: ext4 dev: /dev/dm-1
  ID-2: /boot size: 1.61 GiB used: 277.1 MiB (16.8%) fs: ext4
    dev: /dev/sda2
  ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: partition size: 1.91 GiB used: 0 KiB (0.0%)
    dev: /dev/dm-2
Sensors:
  System Temperatures: cpu: 47.0 C pch: 38.5 C mobo: N/A
  Fan Speeds (RPM): cpu: 2700
Info:
  Processes: 261 Uptime: 1h 36m Memory: 7.66 GiB used: 3.59 GiB (46.8%)
  Shell: Sudo inxi: 3.3.13
« Last Edit: 2023/08/29, 07:53:58 by Muzzle2010 »

Offline Muzzle2010

  • User
  • Posts: 5
Only Kubuntu(haven't tried other flavours, but I assume they are the same) works flawlessly. Even when I tried to clean install Debian, it left Kubuntu's boot order in the first place in BIOS and the OS would boot into Ubuntu's non-existing grub even when I only had Debian on my computer.

Offline charlyheinz

  • User
  • Posts: 101
I do not know if you are fit in German language[, but may be you should investigate some time in using efibootmgr. With efibootmgr you can change settings for the bootorder and so on.
For example:
 https://wiki.ubuntuusers.de/efibootmgr/

Offline Muzzle2010

  • User
  • Posts: 5
I do not know if you are fit in German language[, but may be you should investigate some time in using efibootmgr. With efibootmgr you can change settings for the bootorder and so on.
For example:
 https://wiki.ubuntuusers.de/efibootmgr/

I do not know german, but thankfully Google Translate does. Thanks for the link, it was very informative. I might install Siduction now, and see if I can solve this.

Offline Muzzle2010

  • User
  • Posts: 5
Solved! All i had to do was to go to efibootmgr in siduction and remove ubuntu's boot entry.  Now, i can shutdown or restart and it boots to siduction instead of uefi.

Offline blez

  • Newbie
  • Posts: 2
I have had the same with two different laptops (ThinkPad X1 and a Dell XPS).
This happened a regular Siduction upgrade just using apt.

Now after entering the disk encryption password, the laptop reboots into the BIOS consistently.

With one laptop, I reinstalled Siduction which solved the problem. The other one I'll try to revive using efibootmgr and I'll report back.


Offline blez

  • Newbie
  • Posts: 2
OK, this happened too now with another DELL XPS laptop. Seems that the LVFS (firmware upgrade from the OS) wrecked my laptops.
Siduction + Gnome + Disk Encryption, cannot get passed the encryption entry page at start (it reboots to BIOS).
Will now try to downgrade the BIOS and reinstall, and *disable* LVFS.  (sudo apt-get purge fwupd)

I have had the same with two different laptops (ThinkPad X1 and a Dell XPS).
This happened a regular Siduction upgrade just using apt.

Now after entering the disk encryption password, the laptop reboots into the BIOS consistently.

With one laptop, I reinstalled Siduction which solved the problem. The other one I'll try to revive using efibootmgr and I'll report back.

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.842
Did you guys look into https://forum.siduction.org/index.php?topic=9111.0? That might well be the problem at hand. Easily fixed with the instructions from the 2nd post.

Offline hendrikL

  • Administrator
  • User
  • *****
  • Gravatar
  • Posts: 933
And again. if you didn't update your system yet, please read https://forum.siduction.org/index.php?topic=9115.0