Siduction Forum

Siduction Forum => Upgrade Warnings => Topic started by: DeKa on 2019/03/12, 17:43:45

Title: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/12, 17:43:45
Hallo,
ich habe das Problem das nach der Installation der 15er Kernel nicht bootet.
Meldung beim booten von grub: Kernel nicht gefunden.


Mit dem 14er kann ich booten, nur der kernel-remover meldet mir das kein anderer Kernel installiert wäre.

Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: tommy2 on 2019/03/12, 18:59:05
Maybe a dumb question, but did you do an update-grub?
Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: towo on 2019/03/12, 19:02:36
dpkg -l | grep x-image
Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: DeKa on 2019/03/12, 20:11:16
Sorry Leute, hatte Probleme überhaupt das System stabil mit dem anderen Kernel zu booten und habe daraufhin mein System-Backup wieder eingespielt, wusste mir keinen anderen Rat das Problem zu beheben.
Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: DeKa on 2019/03/13, 20:24:37
Am WE werde ich mich damit nochmals beschäftigen, habe gerade viel zu tun.
Danke nochmals für die Rückmeldung zu meinem Problem.
Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: axt on 2019/03/13, 23:32:47
Da kannst Du ja dann gleich aktuell, sprich 5.0.2-towo.1 (oder bis dahin neuer) installieren.
Title: Re: Kernel 4.20.15 Problem beim booten.
Post by: DeKa on 2019/03/14, 18:18:48
Mit dem 16er Kernel das gleiche Phänomen:
Code: [Select]
root@siductionbox:/home/deka# dpkg -l | grep x-image
rc  linux-image-4.0.1-towo.1-siduction-amd64              4.0-2                                 amd64        Linux 4.0 for 64-bit PCs
rc  linux-image-4.1.2-towo.2-siduction-amd64              4.1-6                                 amd64        Linux 4.1 for 64-bit PCs
rc  linux-image-4.14.11-towo.3-siduction-amd64            4.14-20                               amd64        Linux 4.14 for 64-bit PCs
rc  linux-image-4.15.6-towo.1-siduction-amd64             4.15-13                               amd64        Linux 4.15 for 64-bit PCs
rc  linux-image-4.16.13-towo.1-siduction-amd64            4.16-19                               amd64        Linux 4.16 for 64-bit PCs
rc  linux-image-4.16.2-towo.2-siduction-amd64             4.16-8                                amd64        Linux 4.16 for 64-bit PCs
rc  linux-image-4.17.0-towo.1-siduction-amd64             4.17-1                                amd64        Linux 4.17 for 64-bit PCs
rc  linux-image-4.17.3-towo.1-siduction-amd64             4.17-10                               amd64        Linux 4.17 for 64-bit PCs
rc  linux-image-4.18.11-towo.1-siduction-amd64            4.18-13                               amd64        Linux 4.18 for 64-bit PCs
rc  linux-image-4.18.15-towo.2-siduction-amd64            4.18-19                               amd64        Linux 4.18 for 64-bit PCs
rc  linux-image-4.18.9-towo.1-siduction-amd64             4.18-10                               amd64        Linux 4.18 for 64-bit PCs
rc  linux-image-4.19.11-towo.2-siduction-amd64            4.19-32                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.19.12-towo.1-siduction-amd64            4.19-33                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.19.5-towo.3-siduction-amd64             4.19-21                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.19.6-towo.1-siduction-amd64             4.19-22                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.19.8-towo.1-siduction-amd64             4.19-27                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.19.9-towo.1-siduction-amd64             4.19-29                               amd64        Linux 4.19 for 64-bit PCs
rc  linux-image-4.20.0-towo.1-siduction-amd64             4.20-1                                amd64        Linux 4.20 for 64-bit PCs
rc  linux-image-4.20.0-towo.2-siduction-amd64             4.20-2                                amd64        Linux 4.20 for 64-bit PCs
rc  linux-image-4.20.1-towo.2-siduction-amd64             4.20-6                                amd64        Linux 4.20 for 64-bit PCs
ii  linux-image-4.20.13-towo.1-siduction-amd64            4.20-25                               amd64        Linux 4.20 for 64-bit PCs
ii  linux-image-4.20.16-towo.1-siduction-amd64            4.20-28                               amd64        Linux 4.20 for 64-bit PCs
rc  linux-image-4.20.2-towo.1-siduction-amd64             4.20-7                                amd64        Linux 4.20 for 64-bit PCs
ii  linux-image-4.20.4-towo.1-siduction-amd64             4.20-10                               amd64        Linux 4.20 for 64-bit PCs
rc  linux-image-4.7.4-towo.1-siduction-amd64              4.7-9                                 amd64        Linux 4.7 for 64-bit PCs
rc  linux-image-4.8.11-towo.3-siduction-amd64             4.8-20                                amd64        Linux 4.8 for 64-bit PCs
ii  linux-image-siduction-amd64                           4.20-28                               amd64        Linux image for siduction on 64-bit PCs
Meldung in Grub: Der Kernel kann nicht geladen werden.


Warum? Leider keine Idee.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/14, 19:33:32
df -h

Und die exakte Fehlermeldung!
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/14, 19:51:33
Code: [Select]
root@siductionbox:/home/deka# df -h
Dateisystem    Größe Benutzt Verf. Verw% Eingehängt auf
udev            3,9G       0  3,9G    0% /dev
tmpfs           786M     11M  776M    2% /run
/dev/sdb1        16G    8,0G  6,5G   56% /
tmpfs           3,9G     27M  3,9G    1% /dev/shm
tmpfs           5,0M    4,0K  5,0M    1% /run/lock
tmpfs           3,9G       0  3,9G    0% /sys/fs/cgroup
tmpfs           3,9G     28K  3,9G    1% /tmp
tmpfs           3,9G    1,2M  3,9G    1% /var/log
/dev/sdb2       220G     79G  130G   38% /home
/dev/sda4       621G    456G  133G   78% /media/Daten
tmpfs           786M     20K  786M    1% /run/user/1001
Wie kriege ich diese exakte Fehlermeldung? Ober meinst du ein Foto von Grub.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/14, 20:24:46
"df -h" hat er Dich abfragen lassen, weil fehlender Platz ein häufiger Grund ist, daß ein Kernel nicht vollständig installiert ist. Daß das bei Dir nicht so ist, hat man schon dem Screenshot entnehmen können, aber Screenshots, vor allem solch unnötige, binäres Zeug in einem Textforum, sind alles andere als gern gesehen. Daher sollte man auch nicht davon ausgehen, daß die überhaupt jemand ansieht und dann noch darauf eingeht. Also laß sowas!

Quote from: DeKa
Ober meinst du ein Foto von Grub.
Sowas fragst Du ernsthaft jemanden wie towo?

Quote
Wie kriege ich diese exakte Fehlermeldung?
Gäbe es Der Kernel kann nicht geladen werden. (https://www.google.com/search?&q=grub+%22der+kernel+kann+nicht+geladen+werden%22) als eine Grub-Fehlerausgabe, würde man sie irgendwo mindestens einmal finden. Ergo exakter Wortlaut und nicht umschreiben.

Davon abgesehen könnte man bspw. auch die Kernelpakete reinstallieren und diese Ein- und Ausgaben posten.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/14, 20:57:47
Okay, werde ich so machen und hier posten.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 10:54:08
So hier der reinstall des 16er Kernels.
Code: [Select]
root: apt install --reinstall linux-image-4.20.16-towo.1-siduction-amd64 linux-headers-4.20.16-towo.1-siduction-amd64
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
0 aktualisiert, 0 neu installiert, 2 erneut installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 49,9 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
Holen:1 http://packages.siduction.org/extra unstable/main amd64 linux-headers-4.20.16-towo.1-siduction-amd64 amd64 4.20-28 [8.316 kB]
Holen:2 http://packages.siduction.org/extra unstable/main amd64 linux-image-4.20.16-towo.1-siduction-amd64 amd64 4.20-28 [41,6 MB]
Es wurden 49,9 MB in 8 s geholt (6.580 kB/s).                                 
(Lese Datenbank ... 299262 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../linux-headers-4.20.16-towo.1-siduction-amd64_4.20-28_amd64.deb ...
Entpacken von linux-headers-4.20.16-towo.1-siduction-amd64 (4.20-28) über (4.20-28) ...
Vorbereitung zum Entpacken von .../linux-image-4.20.16-towo.1-siduction-amd64_4.20-28_amd64.deb ...
Entpacken von linux-image-4.20.16-towo.1-siduction-amd64 (4.20-28) über (4.20-28) ...
/etc/kernel/postrm.d/zz-extlinux:
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-4.20.16-towo.1-siduction-amd64...
P: Writing config for /boot/vmlinuz-4.20.13-towo.1-siduction-amd64...
linux-headers-4.20.16-towo.1-siduction-amd64 (4.20-28) wird eingerichtet ...
/etc/kernel/header_postinst.d/dkms:
Error! Bad return status for module build on kernel: 4.20.16-towo.1-siduction-amd64 (x86_64)
Consult /var/lib/dkms/rts_bpp/1.1/build/make.log for more information.
linux-image-4.20.16-towo.1-siduction-amd64 (4.20-28) wird eingerichtet ...
/etc/kernel/postinst.d/dkms:
Error! Bad return status for module build on kernel: 4.20.16-towo.1-siduction-amd64 (x86_64)
Consult /var/lib/dkms/rts_bpp/1.1/build/make.log for more information.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-4.20.16-towo.1-siduction-amd64
/etc/kernel/postinst.d/zz-extlinux:
P: Checking for EXTLINUX directory... found.
P: Writing config for /boot/vmlinuz-4.20.16-towo.1-siduction-amd64...
P: Writing config for /boot/vmlinuz-4.20.13-towo.1-siduction-amd64...
/etc/kernel/postinst.d/zz-update-grub:
GRUB-Konfigurationsdatei wird erstellt …
Thema gefunden: /boot/grub/themes/Grau/theme.txt
Linux-Abbild gefunden: /boot/vmlinuz-4.20.16-towo.1-siduction-amd64
initrd-Abbild gefunden: /boot/initrd.img-4.20.16-towo.1-siduction-amd64
Linux-Abbild gefunden: /boot/vmlinuz-4.20.13-towo.1-siduction-amd64
initrd-Abbild gefunden: /boot/initrd.img-4.20.13-towo.1-siduction-amd64
Debian GNU/Linux buster/sid auf /dev/sda2 gefunden
Debian GNU/Linux buster/sid auf /dev/sdc1 gefunden
Found memtest86+ image: /boot/memtest86+.bin
Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin
Debian GNU/Linux buster/sid auf /dev/sda2 gefunden
Debian GNU/Linux buster/sid auf /dev/sdc1 gefunden
erledigt
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 11:09:22
Neustart schlägt fehl:


Code: [Select]
Linux 4.20.16-towo.1-siduction-amd64
Fehler: Datei >>/boot/vmlinuz/-4.20.16-towo.1-siduction-amd64<< nicht gefunden
Initiale Ramdisk wird geladen
Fehler: Sie müssen zuerst den Kernel laden
Beliebige Taste drücker, um fortzusetzen ..._



Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 11:17:52
Inhalt der /boot/extlinux/linux.cfg
Code: [Select]
## /boot/extlinux/linux.cfg
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update


label l0
   menu label Debian GNU/Linux, kernel 4.20.16-towo.1-siduction-amd64
   linux /boot/vmlinuz-4.20.16-towo.1-siduction-amd64
   append initrd=/boot/initrd.img-4.20.16-towo.1-siduction-amd64 root=UUID=071347aa-89b4-4e9a-b1fe-a0892eafa410 ro quiet


label l0r
   menu label Debian GNU/Linux, kernel 4.20.16-towo.1-siduction-amd64 (recovery mode)
   linux /boot/vmlinuz-4.20.16-towo.1-siduction-amd64
   append initrd=/boot/initrd.img-4.20.16-towo.1-siduction-amd64 root=UUID=071347aa-89b4-4e9a-b1fe-a0892eafa410 ro single
   text help
   This option boots the system into recovery mode (single-user)
   endtext


label l1
   menu label Debian GNU/Linux, kernel 4.20.13-towo.1-siduction-amd64
   linux /boot/vmlinuz-4.20.13-towo.1-siduction-amd64
   append initrd=/boot/initrd.img-4.20.13-towo.1-siduction-amd64 root=UUID=071347aa-89b4-4e9a-b1fe-a0892eafa410 ro quiet


label l1r
   menu label Debian GNU/Linux, kernel 4.20.13-towo.1-siduction-amd64 (recovery mode)
   linux /boot/vmlinuz-4.20.13-towo.1-siduction-amd64
   append initrd=/boot/initrd.img-4.20.13-towo.1-siduction-amd64 root=UUID=071347aa-89b4-4e9a-b1fe-a0892eafa410 ro single
   text help
   This option boots the system into recovery mode (single-user)
   endtext

Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/16, 11:52:51

Quote from: DeKa
Code: [Select]
Error! Bad return status for module build on kernel: 4.20.16-towo.1-siduction-amd64 (x86_64)

Bei einem Error brauchst Du damit nicht booten versuchen.

Quote
Code: [Select]
Consult /var/lib/dkms/rts_bpp/1.1/build/make.log for more information.

Und weshalb postest Du da irgendwas anderes?
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 13:30:36
Sorry habe ich nicht gesehen, gelesen.


Das mit dem Error ist schon eine Weile so, da wurde hier berichtet das man diese Meldung ignorieren kann, sollte.
Das installieren von neuen Kerneln hatte es ja auch immer funktioniert und sie wurden geladen.


Also hier das log-file:
Code: [Select]
DKMS make.log for rts_bpp-1.1 for kernel 4.20.16-towo.1-siduction-amd64 (x86_64)
Sa 16. Mär 10:55:54 CET 2019
make: Verzeichnis „/usr/src/linux-headers-4.20.16-towo.1-siduction-amd64“ wird betreten
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/general.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/sd.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/xd.o
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘proc_info’:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:141:41: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  SPRINTF("        Build: %s\n", __TIME__);
                                         ^
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:30:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:3: error: ‘struct scsi_host_template’ has no member named ‘proc_info’; did you mean ‘show_info’?
  .proc_info =   proc_info,
   ^~~~~~~~~
   show_info
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: error: initialization of ‘struct proc_dir_entry *’ from incompatible pointer type ‘int (*)(struct Scsi_Host *, char *, char **, off_t,  int,  int)’ {aka ‘int (*)(struct Scsi_Host *, char *, char **, long int,  int,  int)’} [-Werror=incompatible-pointer-types]
  .proc_info =   proc_info,
                 ^~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: note: (near initialization for ‘rtsx_host_template.proc_dir’)
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘rtsx_control_thread’:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad target number (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:44: note: format string is defined here
    printk(KERN_ERR "Bad target number (%d:%d)\n",
                                           ~^
                                           %lld
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:34: note: format string is defined here
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
                                 ~^
                                 %lld
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:893:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_probe’
 static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
                      ^~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:900:35: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  printk(KERN_INFO "--- %s ---\n", __TIME__);
                                   ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1048:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_remove’
 static void __devexit rtsx_remove(struct pci_dev *pci)
                       ^~~~~~~~~~~
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1073:11: error: ‘rtsx_probe’ undeclared here (not in a function); did you mean ‘rtsx_writel’?
  .probe = rtsx_probe,
           ^~~~~~~~~~
           rtsx_writel
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:12: error: implicit declaration of function ‘__devexit_p’; did you mean ‘__memcat_p’? [-Werror=implicit-function-declaration]
  .remove = __devexit_p(rtsx_remove),
            ^~~~~~~~~~~
            __memcat_p
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/ms.o
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:24: error: ‘rtsx_remove’ undeclared here (not in a function); did you mean ‘rtsx_resume’?
  .remove = __devexit_p(rtsx_remove),
                        ^~~~~~~~~~~
                        rtsx_resume
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:786:13: warning: ‘rtsx_init_options’ defined but not used [-Wunused-function]
 static void rtsx_init_options(struct rtsx_chip *chip)
             ^~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:761:12: warning: ‘rtsx_scan_thread’ defined but not used [-Wunused-function]
 static int rtsx_scan_thread(void * __dev)
            ^~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:751:13: warning: ‘release_everything’ defined but not used [-Wunused-function]
 static void release_everything(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:715:13: warning: ‘quiesce_and_remove_host’ defined but not used [-Wunused-function]
 static void quiesce_and_remove_host(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:559:12: warning: ‘rtsx_polling_thread’ defined but not used [-Wunused-function]
 static int rtsx_polling_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:450:12: warning: ‘rtsx_control_thread’ defined but not used [-Wunused-function]
 static int rtsx_control_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:255:34: warning: ‘rtsx_host_template’ defined but not used [-Wunused-variable]
 static struct scsi_host_template rtsx_host_template = {
                                  ^~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[1]: *** [scripts/Makefile.build:297: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o] Fehler 1
make[1]: *** Es wird auf noch nicht beendete Prozesse gewartet....
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c: In function ‘ext_sd_send_cmd_get_rsp’:
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c:3665:25: warning: bitwise comparison always evaluates to true [-Wtautological-compare]
     if ((ptr[3] & 0x1E) != 0x03) {
                         ^~
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:17,
                 from ./arch/x86/include/asm/irqflags.h:68,
                 from ./include/linux/irqflags.h:16,
                 from ./include/linux/rcupdate.h:39,
                 from ./include/linux/rculist.h:11,
                 from ./include/linux/pid.h:5,
                 from ./include/linux/sched.h:14,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
In function ‘memcpy’,
    inlined from ‘inquiry’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:367:3,
    inlined from ‘rtsx_scsi_handler’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:2387:13:
./include/linux/string.h:348:4: error: call to ‘__read_overflow2’ declared with attribute error: detected read beyond size of object passed as 2nd parameter
    __read_overflow2();
    ^~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:296: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o] Fehler 1
make: *** [Makefile:1750: rts_bpp.ko] Fehler 2
make: Verzeichnis „/usr/src/linux-headers-4.20.16-towo.1-siduction-amd64“ wird verlassen
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/16, 15:19:29
Quote
Fehler: Datei >>/boot/vmlinuz/-4.20.16-towo.1-siduction-amd64<< nicht gefunden

Wenn das wirklich genau so da steht, dann wundert mich gar nichts.
Und warum extlinux?
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/16, 15:52:49
Er hat wohl Deinen brandaktuellen Wiki-Artikelabschnitt (https://wiki.siduction.de/index.php?title=Installieren_und_Einrichten_von_extlinux#L.C3.B6sung) gelesen. Warum, weiß ich aber nicht. ;-)
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 16:06:17
Den Ordner vmlinuz gibt es ja auch nicht weil virtuell, oder?
Wie bekomme ich das korrigiert?


Extlinux: Da habe ich mich vertan, ist natürlich Blödsinn.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/16, 16:54:55
ls -al /boot/
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 16:57:57
Code: [Select]
root@siductionbox:/home/deka# ls -al /boot/
insgesamt 72180
drwxr-xr-x  4 root root     4096 Mär 16 10:56 .
drwxr-xr-x 25 root root     4096 Mär 14 18:11 ..
-rw-r--r--  1 root root   180002 Feb 27 18:15 config-4.20.13-towo.1-siduction-amd64
-rw-r--r--  1 root root   180002 Mär 13 22:56 config-4.20.16-towo.1-siduction-amd64
drwxr-xr-x  2 root root     4096 Mär 16 10:56 extlinux
drwxr-xr-x  6 root root     4096 Mär 16 11:21 grub
-rw-r--r--  1 root root 29283764 Mär 12 20:24 initrd.img-4.20.13-towo.1-siduction-amd64
-rw-r--r--  1 root root 29285177 Mär 16 10:56 initrd.img-4.20.16-towo.1-siduction-amd64
-rw-r--r--  1 root root   182704 Jun 25  2015 memtest86+.bin
-rw-r--r--  1 root root   184840 Jun 25  2015 memtest86+_multiboot.bin
-rw-r--r--  1 root root  2777686 Feb 27 18:15 System.map-4.20.13-towo.1-siduction-amd64
-rw-r--r--  1 root root  2778262 Mär 13 22:56 System.map-4.20.16-towo.1-siduction-amd64
-rw-r--r--  1 root root  4506496 Feb 27 18:15 vmlinuz-4.20.13-towo.1-siduction-amd64
-rw-r--r--  1 root root  4510592 Mär 13 22:56 vmlinuz-4.20.16-towo.1-siduction-amd64
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/16, 17:14:25
Quote
Fehler: Datei >>/boot/vmlinuz/-4.20.16-towo.1-siduction-amd64<< nicht gefunden

Nochmal, steht das wirklich so da?
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 17:32:47
Ja wirklich.


Könnte auch ein Foto von der Meldung machen, ist hier nicht so gewünscht.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/16, 17:44:15
1. Wenn das da so steht, sieht mir das nicht nach Grub aus.
2. /boot/vmlinuz/-4.20.16-towo.1-siduction-amd64 ist totaler Mumpiz, das muss

/boot/vmlinuz-4.20.16-towo.1-siduction-amd64

heissen, wo auch immer das steht. Bei Grub wäre es /boot/grub/grub.cfg.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 17:51:34
Entschuldige du hast natürlich recht es heißt /boot/vmlinuz-4.20.16-towo.1-siduction-amd64
Ich sollte meine Brille putzen.



Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/16, 17:55:49
Ein update-grub ergibt:
Code: [Select]
root@siductionbox:#update-grub
GRUB-Konfigurationsdatei wird erstellt …
Thema gefunden: /boot/grub/themes/Grau/theme.txt
Linux-Abbild gefunden: /boot/vmlinuz-4.20.16-towo.1-siduction-amd64
initrd-Abbild gefunden: /boot/initrd.img-4.20.16-towo.1-siduction-amd64
Linux-Abbild gefunden: /boot/vmlinuz-4.20.13-towo.1-siduction-amd64
initrd-Abbild gefunden: /boot/initrd.img-4.20.13-towo.1-siduction-amd64
Debian GNU/Linux buster/sid auf /dev/sda2 gefunden
Debian GNU/Linux buster/sid auf /dev/sdc1 gefunden
Found memtest86+ image: /boot/memtest86+.bin
Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin
Debian GNU/Linux buster/sid auf /dev/sda2 gefunden
Debian GNU/Linux buster/sid auf /dev/sdc1 gefunden
erledigt
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/17, 10:44:09
Beim full-upgrade heute morgen gab es eine neue Grub2 Version:
Code: [Select]
root@siductionbox:/home/deka# dpkg --list | grep grub
ii  grub-common                                           2.02+dfsg1-13                         amd64        GRand Unified Bootloader (common files)
ii  grub-efi-amd64-bin                                    2.02+dfsg1-13                         amd64        GRand Unified Bootloader, version 2 (EFI-AMD64 modules)
ii  grub-efi-amd64-signed                                 1+2.02+dfsg1+13                       amd64        GRand Unified Bootloader, version 2 (amd64 UEFI signed by Debian)
ii  grub-pc                                               2.02+dfsg1-13                         amd64        GRand Unified Bootloader, version 2 (PC/BIOS version)
ii  grub-pc-bin                                           2.02+dfsg1-13                         amd64        GRand Unified Bootloader, version 2 (PC/BIOS modules)
ii  grub2-common                                          2.02+dfsg1-13                         amd64        GRand Unified Bootloader (common files for version 2)
Nach dem full-upgrade habe ich den Kernel 4.20.16 reinstalliert und ein update-grub gemache. Beim Neustart kann ich jetzt in den Kernel 4.20.16 booten:
Code: [Select]
root@siductionbox:/home/deka# uname -r
4.20.16-towo.1-siduction-amd64
Code: [Select]

root@siductionbox:/home/deka# uname -a
Linux siductionbox 4.20.16-towo.1-siduction-amd64 #1 SMP PREEMPT siduction 4.20-28 (2019-03-13) x86_64 GNU/Linux
Code: [Select]
root@siductionbox:/home/deka# inxi -a
CPU: Quad Core Intel Core i7-3632QM (-MT MCP-)
speed/min/max: 1197/1200/3200 MHz
Kernel: 4.20.16-towo.1-siduction-amd64 x86_64 Up: 17m
Mem: 1343.0/7856.6 MiB (17.1%) Storage: 1.03 TiB (51.3% used) Procs: 238
Shell: bash 5.0.2 inxi: 3.0.32
Und hier mein System:
Code: [Select]
root@siductionbox:/home/deka# inxi -c0SGx
System:
  Host: siductionbox Kernel: 4.20.16-towo.1-siduction-amd64 x86_64 bits: 64
  compiler: gcc v: 8.3.0 Desktop: Xfce 4.12.4
  Distro: siduction 13.1.0 Firestarter - xfce - (201305202241)
  base: Debian GNU/Linux buster/sid
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: CLEVO/KAPOK
  driver: i915 v: kernel bus ID: 00:02.0
  Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1920x1080~60Hz
  OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 4.2 Mesa 18.3.4
  direct render: Yes
Sollte beim nächsten Kernel-Update die Installation auch wieder funktionieren.
Hier noch die jetzige make.log file:(var/lib/dkms/rts_bpp/1.1/build/make.log)
Code: [Select]
DKMS make.log for rts_bpp-1.1 for kernel 4.20.16-towo.1-siduction-amd64 (x86_64)
So 17. Mär 10:08:52 CET 2019
make: Verzeichnis „/usr/src/linux-headers-4.20.16-towo.1-siduction-amd64“ wird betreten
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/general.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/sd.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/xd.o
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:30:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘proc_info’:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:141:41: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  SPRINTF("        Build: %s\n", __TIME__);
                                         ^
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:3: error: ‘struct scsi_host_template’ has no member named ‘proc_info’; did you mean ‘show_info’?
  .proc_info =   proc_info,
   ^~~~~~~~~
   show_info
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: error: initialization of ‘struct proc_dir_entry *’ from incompatible pointer type ‘int (*)(struct Scsi_Host *, char *, char **, off_t,  int,  int)’ {aka ‘int (*)(struct Scsi_Host *, char *, char **, long int,  int,  int)’} [-Werror=incompatible-pointer-types]
  .proc_info =   proc_info,
                 ^~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: note: (near initialization for ‘rtsx_host_template.proc_dir’)
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘rtsx_control_thread’:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad target number (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:44: note: format string is defined here
    printk(KERN_ERR "Bad target number (%d:%d)\n",
                                           ~^
                                           %lld
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:34: note: format string is defined here
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
                                 ~^
                                 %lld
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:893:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_probe’
 static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
                      ^~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:900:35: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  printk(KERN_INFO "--- %s ---\n", __TIME__);
                                   ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1048:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_remove’
 static void __devexit rtsx_remove(struct pci_dev *pci)
                       ^~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1073:11: error: ‘rtsx_probe’ undeclared here (not in a function); did you mean ‘rtsx_writel’?
  .probe = rtsx_probe,
           ^~~~~~~~~~
           rtsx_writel
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/ms.o
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:12: error: implicit declaration of function ‘__devexit_p’; did you mean ‘__memcat_p’? [-Werror=implicit-function-declaration]
  .remove = __devexit_p(rtsx_remove),
            ^~~~~~~~~~~
            __memcat_p
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:24: error: ‘rtsx_remove’ undeclared here (not in a function); did you mean ‘rtsx_resume’?
  .remove = __devexit_p(rtsx_remove),
                        ^~~~~~~~~~~
                        rtsx_resume
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:786:13: warning: ‘rtsx_init_options’ defined but not used [-Wunused-function]
 static void rtsx_init_options(struct rtsx_chip *chip)
             ^~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:761:12: warning: ‘rtsx_scan_thread’ defined but not used [-Wunused-function]
 static int rtsx_scan_thread(void * __dev)
            ^~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:751:13: warning: ‘release_everything’ defined but not used [-Wunused-function]
 static void release_everything(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:715:13: warning: ‘quiesce_and_remove_host’ defined but not used [-Wunused-function]
 static void quiesce_and_remove_host(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:559:12: warning: ‘rtsx_polling_thread’ defined but not used [-Wunused-function]
 static int rtsx_polling_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:450:12: warning: ‘rtsx_control_thread’ defined but not used [-Wunused-function]
 static int rtsx_control_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:255:34: warning: ‘rtsx_host_template’ defined but not used [-Wunused-variable]
 static struct scsi_host_template rtsx_host_template = {
                                  ^~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[1]: *** [scripts/Makefile.build:297: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o] Fehler 1
make[1]: *** Es wird auf noch nicht beendete Prozesse gewartet....
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c: In function ‘ext_sd_send_cmd_get_rsp’:
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c:3665:25: warning: bitwise comparison always evaluates to true [-Wtautological-compare]
     if ((ptr[3] & 0x1E) != 0x03) {
                         ^~
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:17,
                 from ./arch/x86/include/asm/irqflags.h:68,
                 from ./include/linux/irqflags.h:16,
                 from ./include/linux/rcupdate.h:39,
                 from ./include/linux/rculist.h:11,
                 from ./include/linux/pid.h:5,
                 from ./include/linux/sched.h:14,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
In function ‘memcpy’,
    inlined from ‘inquiry’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:367:3,
    inlined from ‘rtsx_scsi_handler’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:2387:13:
./include/linux/string.h:348:4: error: call to ‘__read_overflow2’ declared with attribute error: detected read beyond size of object passed as 2nd parameter
    __read_overflow2();
    ^~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:296: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o] Fehler 1
make: *** [Makefile:1750: rts_bpp.ko] Fehler 2
make: Verzeichnis „/usr/src/linux-headers-4.20.16-towo.1-siduction-amd64“ wird verlassen
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/19, 17:10:12
Heute wurde der Kernel 4.20.17-towo.1 installiert, booten über den Kernel funktioniert auch.
Die Error-Meldung beim installieren des Kernels taucht trotzdem auf, hier die var/lib/dkms/rts_bpp/1.1/build/make.log:
Code: [Select]
DKMS make.log for rts_bpp-1.1 for kernel 4.20.17-towo.1-siduction-amd64 (x86_64)
Di 19. Mär 16:56:08 CET 2019
make: Verzeichnis „/usr/src/linux-headers-4.20.17-towo.1-siduction-amd64“ wird betreten
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/general.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/sd.o
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/xd.o
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:29:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:30:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_card.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/sd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘proc_info’:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:141:41: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  SPRINTF("        Build: %s\n", __TIME__);
                                         ^
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:3: error: ‘struct scsi_host_template’ has no member named ‘proc_info’; did you mean ‘show_info’?
  .proc_info =   proc_info,
   ^~~~~~~~~
   show_info
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: error: initialization of ‘struct proc_dir_entry *’ from incompatible pointer type ‘int (*)(struct Scsi_Host *, char *, char **, off_t,  int,  int)’ {aka ‘int (*)(struct Scsi_Host *, char *, char **, long int,  int,  int)’} [-Werror=incompatible-pointer-types]
  .proc_info =   proc_info,
                 ^~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:259:17: note: (near initialization for ‘rtsx_host_template.proc_dir’)
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: In function ‘rtsx_control_thread’:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad target number (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:495:44: note: format string is defined here
    printk(KERN_ERR "Bad target number (%d:%d)\n",
                                           ~^
                                           %lld
In file included from ./include/linux/printk.h:7,
                 from ./include/linux/kernel.h:14,
                 from ./arch/x86/include/asm/percpu.h:45,
                 from ./arch/x86/include/asm/current.h:6,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:23:
./include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘u64’ {aka ‘long long unsigned int’} [-Wformat=]
 #define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro ‘KERN_SOH’
 #define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:11: note: in expansion of macro ‘KERN_ERR’
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
           ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:501:34: note: format string is defined here
    printk(KERN_ERR "Bad LUN (%d:%d)\n",
                                 ~^
                                 %lld
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/xd.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c: At top level:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:893:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_probe’
 static int __devinit rtsx_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
                      ^~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:900:35: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
  printk(KERN_INFO "--- %s ---\n", __TIME__);
                                   ^~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1048:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rtsx_remove’
 static void __devexit rtsx_remove(struct pci_dev *pci)
                       ^~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1073:11: error: ‘rtsx_probe’ undeclared here (not in a function); did you mean ‘rtsx_writel’?
  .probe = rtsx_probe,
           ^~~~~~~~~~
           rtsx_writel
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:12: error: implicit declaration of function ‘__devexit_p’; did you mean ‘__memcat_p’? [-Werror=implicit-function-declaration]
  .remove = __devexit_p(rtsx_remove),
            ^~~~~~~~~~~
            __memcat_p
  CC [M]  /var/lib/dkms/rts_bpp/1.1/build/src/ms.o
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:1074:24: error: ‘rtsx_remove’ undeclared here (not in a function); did you mean ‘rtsx_resume’?
  .remove = __devexit_p(rtsx_remove),
                        ^~~~~~~~~~~
                        rtsx_resume
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:786:13: warning: ‘rtsx_init_options’ defined but not used [-Wunused-function]
 static void rtsx_init_options(struct rtsx_chip *chip)
             ^~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:761:12: warning: ‘rtsx_scan_thread’ defined but not used [-Wunused-function]
 static int rtsx_scan_thread(void * __dev)
            ^~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:751:13: warning: ‘release_everything’ defined but not used [-Wunused-function]
 static void release_everything(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:715:13: warning: ‘quiesce_and_remove_host’ defined but not used [-Wunused-function]
 static void quiesce_and_remove_host(struct rtsx_dev *dev)
             ^~~~~~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:559:12: warning: ‘rtsx_polling_thread’ defined but not used [-Wunused-function]
 static int rtsx_polling_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:450:12: warning: ‘rtsx_control_thread’ defined but not used [-Wunused-function]
 static int rtsx_control_thread(void * __dev)
            ^~~~~~~~~~~~~~~~~~~
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx.c:255:34: warning: ‘rtsx_host_template’ defined but not used [-Wunused-variable]
 static struct scsi_host_template rtsx_host_template = {
                                  ^~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[1]: *** [scripts/Makefile.build:297: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx.o] Fehler 1
make[1]: *** Es wird auf noch nicht beendete Prozesse gewartet....
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c: In function ‘ext_sd_send_cmd_get_rsp’:
/var/lib/dkms/rts_bpp/1.1/build/src/sd.c:3665:25: warning: bitwise comparison always evaluates to true [-Wtautological-compare]
     if ((ptr[3] & 0x1E) != 0x03) {
                         ^~
In file included from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_transport.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:28:
/var/lib/dkms/rts_bpp/1.1/build/src/rtsx_chip.h:330: warning: "SG_END" redefined
 #define SG_END   0x02
 
In file included from ./include/linux/blkdev.h:28,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/ms.c:23:
./include/linux/scatterlist.h:65: note: this is the location of the previous definition
 #define SG_END  0x02UL
 
In file included from ./include/linux/bitmap.h:9,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:17,
                 from ./arch/x86/include/asm/irqflags.h:68,
                 from ./include/linux/irqflags.h:16,
                 from ./include/linux/rcupdate.h:39,
                 from ./include/linux/rculist.h:11,
                 from ./include/linux/pid.h:5,
                 from ./include/linux/sched.h:14,
                 from ./include/linux/blkdev.h:5,
                 from /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:23:
In function ‘memcpy’,
    inlined from ‘inquiry’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:367:3,
    inlined from ‘rtsx_scsi_handler’ at /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.c:2387:13:
./include/linux/string.h:348:4: error: call to ‘__read_overflow2’ declared with attribute error: detected read beyond size of object passed as 2nd parameter
    __read_overflow2();
    ^~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:296: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o] Fehler 1
make: *** [Makefile:1750: rts_bpp.ko] Fehler 2
make: Verzeichnis „/usr/src/linux-headers-4.20.17-towo.1-siduction-amd64“ wird verlassen

@towo könntest du bitte nachschauen, wieso beim installieren des Kernels zwei Fehler angezeigt werden der Kernel aber trotzdem geladen werden kann?
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/19, 17:49:43
Wo werden denn 2 Fehler angezeigt?
Und für deinen rts_bpp Fehler kann ich nichts, das ist ein 3rd party dkms modul, welches Du selbst installiert hast.
Title: Re: Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/19, 18:11:02
Das die Fehler von irgendeinem Modul verursacht werden, Fehler 1 + Fehler 2.
Ich weiß leider nicht welches Modul da mal installiert wurde das diesen Fehler auslöst. Ich würde es deinstallieren wenn ich wüsste welches es wäre.


Und Danke für die Antwort.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: jure on 2019/03/19, 18:15:38
scheint zu nem cardreader zu gehören

Quote
Linux driver for Realtek PCI-Express card reader chip.

Linux already has rtsx_pci driver which theoretically should work with
rtl8411 chip. But in fact it can only detect the chip and nothing more.

rts_bpp works fine with rtl8411 card reader and probably some others.

https://github.com/Ri0n/rts_bpp
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/19, 18:53:28
Hallo Jürgen,
das wird es wohl sein.
Installiert hierzu habe ich nichts, könnte sein das der Kernel den verbauten Card-Reader des Notebooks von Tuxedo nicht erkennt.


Danke dir für den Tipp.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/19, 19:31:20
Quote from: DeKa
Installiert hierzu habe ich nichts

Soso. Auch nichts von Tuxedo?
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/19, 19:41:57
Nee, ist nur Siduction installiert.
Tuxedo mit Linux Mint war Mal installiert und das auf einer anderen Platte, dort ist jetzt Debian stable (sda) drauf.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/19, 20:59:42
Also siduction installiert mit Sicherheit keine dkms-source und schonmal gar nicht, wenn Selbige in keinem Repo ist.
Und die 2 ominösen Fehler, hab ich bis jetzt auch noch nicht gesehen.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/20, 06:41:19
Danke für die Rückmeldung, ich weiß leider nicht mehr welche Software das mitgebracht hat.


Da du die Fehler nicht kennst ignoriere ich diese und forsche nach was dieses Zeug installiert hat.


Neuinstallation ist wohl das beste.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/20, 07:05:39
Code: [Select]
Da du die Fehler nicht kennst ignoriere ich diese und forsche nach was dieses Zeug installiert hat.
Willst Du mich veralbern? Du resest immer von 2 Fehlern, schreibst aber nicht welche Fehler.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/20, 08:26:06
DeKa, Du selbst weißt nicht, was Du wie irgendwann ins System gebracht hast (aber sowas wie ein optisch modifiziertes Bootmenu scheint wichtig zu sein). Das liest sich für mich nicht wie sauberes Arbeiten. Dazu machst Du's Dir unnötig schwer mit einem weshalb auch immer Dualboot zweier sehr ähnlicher Systeme.

Neuinstallation? Keine schlechte Idee in diesem Fall, aber sauber ein OS statt Dualboot (Frag für ein aktuelles Image towo/agaida/piper im IRC!). Für eventuell weitere nimm VBox (auch wenn die GA in letzterhältlicher Version von gestern 6.0.5-129380 auch noch nicht unter Kernel 5.0.3 verwendbar sind - was immer die da so lange zum Anpassen brauchen)!
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/20, 08:55:39
Hallo @towo,
ich meinte nur diese Ausgabe von make.log:

Code: [Select]
make[1]: *** [scripts/Makefile.build:296: /var/lib/dkms/rts_bpp/1.1/build/src/rtsx_scsi.o] Fehler 1
make: *** [Makefile:1750: rts_bpp.ko] Fehler 2
make: Verzeichnis „/usr/src/linux-headers-4.20.17-towo.1-siduction-amd64“ wird verlassen
Ich  möchte dich in keiner Form veralbern.
Wenn ich mich dir gegenüber nicht korrekt ausgedrückt, dich genervt habe ist das nicht mit Vorsatz geschehen und es tut mir sehr leid wenn ich dich angegriffen habe.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: towo on 2019/03/20, 09:48:18
Wenn Dein System funktioniert, dann solltest Du einfach diesen Unsinn deinstallieren.
Anderenfalls, brauchst Du eine neuere Version dieser dkms-source, die auch mit kernel 4.20 bzw. in ein paar Tagen mit kernel 5.0 funktioniert.

Nochmal, das ist kein Paket, welches durch siduction installiert wurde, ich finde selbiges nämlich nicht in irgendeinem Debian Repo.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: whistler_mb on 2019/03/20, 14:32:39
Ich habe auch einen Laptop von Tuxedo mit diesem Kartenleser
Code: [Select]
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
Der benutzt den Treiber rtsx_pci der den rts_bpp ersetzt hat
https://wiki.debian.org/Realtek%20Barossa%20plus (https://wiki.debian.org/Realtek%20Barossa%20plus)

Allerdings hat der Leser immer wieder Probleme mit SD-Karten und den entsprechenden Spannungen. Daher verwende ich einen USB-Kartenleser.
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/20, 17:03:24
Code: [Select]
root@siductionbox:# apt-cache policy dkms
dkms:
  Installiert:           2.6.1-4
  Installationskandidat: 2.6.1-4
  Versionstabelle:
 *** 2.6.1-4 500
        500 http://ftp.uni-stuttgart.de/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status

Dann kann das deinstalliert werden, oder?
Ist weg!


Code: [Select]
root@siductionbox:# apt remove dkms
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden ENTFERNT:
  dkms rts-bpp-dkms
0 aktualisiert, 0 neu installiert, 2 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 1.096 kB Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] j
(Lese Datenbank ... 299278 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von rts-bpp-dkms (1.1) ...


-------- Uninstall Beginning --------
Module:  rts_bpp
Version: 1.1
Kernel:  3.0.0-17-generic (x86_64)
-------------------------------------


Status: This module version was INACTIVE for this kernel.
depmod...(bad exit status: 1)


DKMS: uninstall completed.


------------------------------
Deleting module version: 1.1
completely from the DKMS tree.
------------------------------
Done.
Entfernen von dkms (2.6.1-4) ...
Trigger für siduction-dynamic-dms (2016.01.31) werden verarbeitet ...
Trigger für man-db (2.8.5-2) werden verarbeitet ...

Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: axt on 2019/03/20, 19:49:43
Quote from: DeKa
Code: [Select]
root@siductionbox:# apt remove dkms

Herrlich! Davon hat kein Mensch geredet.

DKMS (https://de.wikipedia.org/wiki/Dynamic_Kernel_Module_Support)
Title: Re: (gelöst) Kernel 4.20.16 Problem beim booten.
Post by: DeKa on 2019/03/24, 10:59:18
Kernel 5.0.4 ist einwandfrei installiert worden, keine Error-Meldungen mehr.


Code: [Select]
deka@siductionbox:~$ inxi -F
System:
  Host: siductionbox Kernel: 5.0.4-towo.1-siduction-amd64 x86_64 bits: 64
  Desktop: Xfce 4.12.4
  Distro: siduction 13.1.0 Firestarter - xfce - (201305202241)

[/size]Nachdem beim letzten mal dieses Modul mit deinstalliert wurde habe ich dkms natürlich wieder installiert.[size=78%]