[DE] kleines verständnisproblem mit ati-graka-treiber

[oschi]

hallo

ich hab seit ein paar tagen eine ati-grafikkarte mit einem vr710-chip. die lief auch ohne probleme beim installieren, genauer solange bis ich den treiber selbst nach handbuchanleitung kompilieren wollte.

das klappte natürlich nicht (dank 37er-kernel). seitdem hab ich die folgendes versucht:

installiere ich fglrx einfach über apt, läudft zwar mein x, aber nur mit niedriger auflösung und ohne compositing

installiere ich xserver-xorg-xy-radeon per apt bekomme ich statt x nur orangene streifen vertikal auf dem bildschirm

ich blicke im moment nicht ganz durch was ich falsch mache, bzw. wie ich diesen zustand beheben kann.

muss ich üebrhaupt einen der beiden installieren, oder reicht es linux-firmware-nonfree freigeschaltet zu haben?

vielleicht kann mich ja jemand vom schlauch schubsen.....

mfg

oschi

[towo]

Damit radeon funktioniert, muß firmware-linux-nonfree installiert sein.
Was Du mit "oder reicht es linux-firmware-nonfree freigeschaltet zu haben" meinst, verschließt sich mir.

[oschi]

Vielen dank für die schnelle antwort

Ich meinte schon dass Firmware nonfree installiert ist...freigeschaltet war etwas missverständlich ausgedrückt.

Also muss ich nur Firmware nonfree installieren und das wars dann? Sonst brauch ich keine extra Pakete?
das ist genau die Sache die ich nicht ganz versteh...
MfG

Oschi

[OppaErich]

Ich hab' den fglrx nie installiert...wird der durch xorg.conf irgendwie vorgegeben ?

Hat der .37 irgendetwas was Du unbedingt brauchst ? Denn ich würde dann einfach den .36 weiter verwenden und warten.

[oschi]

hab alles runter und nur firmware-linux-nonfree installiert

ein benutzer mit aktivem compositing zeigt nur einen schwarzen bildschirm, und für alle benutzer komme ich über 1280x1024 nicht hinaus.

compositing und höhere auflösung haben aber schon mal funktioniert.....

liegt das event am 37er kernel?

mfg
oschi

[towo]

/var/log/Xorg.0.log

Zeigen! Eine Glaskugel hat hier Niemand.

[oschi]

hier xorg.0.log

Code: [Select]




X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.26-dsa-amd64 x86_64 Debian
Current Operating System: Linux calvin 2.6.37-0.slh.2-aptosid-amd64 #1 SMP PREEMPT Sun Jan 9 20:40:11 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-0.slh.2-aptosid-amd64 root=UUID=23b17d4b-898b-42ee-9b5a-75930526f2a6 ro vga=791 quiet
Build Date: 02 December 2010  01:10:32AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 10 16:25:31 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c7500
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:2:0:0) 1002:954f:1682:2920 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8f0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(WW) Warning, couldn't open module ati
(II) UnloadModule: "ati"
(EE) Failed to load module "ati" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 11.21
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: SAM  Model: 27e  Serial#: 1296380466
(II) VESA(0): Year: 2008  Week: 10
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) VESA(0): Sync:  Separate  Composite  SyncOnGreen
(II) VESA(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) VESA(0): Gamma: 2.20
(II) VESA(0): DPMS capabilities: Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.644 redY: 0.333   greenX: 0.286 greenY: 0.603
(II) VESA(0): blueX: 0.152 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
(II) VESA(0): Supported established timings:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@67Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 832x624@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): 1280x1024@75Hz
(II) VESA(0): 1152x864@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported standard timings:
(II) VESA(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) VESA(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) VESA(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) VESA(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) VESA(0): Supported detailed timing:
(II) VESA(0): clock: 119.0 MHz   Image Size:  474 x 296 mm
(II) VESA(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) VESA(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
(II) VESA(0): Monitor name: SyncMaster
(II) VESA(0): Serial No: H9XQ300671
(II) VESA(0): EDID (in hex):
(II) VESA(0): 00ffffffffffff004c2d7e023232454d
(II) VESA(0): 0a1201030e2f1e782ad515a455499a27
(II) VESA(0): 145054bfef80b30081808140714f0101
(II) VESA(0): 0101010101017c2e90a0601a1e403020
(II) VESA(0): 3600da281100001a000000fd00384b1e
(II) VESA(0): 510e000a202020202020000000fc0053
(II) VESA(0): 796e634d61737465720a2020000000ff
(II) VESA(0): 00483958513330303637310a202000cb
(II) VESA(0): EDID vendor "SAM", prod id 638
(II) VESA(0):     EDID quirk: Detailed timing is not preferred, use largest mode at 60Hz
(II) VESA(0): Using EDID range info for horizontal sync
(II) VESA(0): Using EDID range info for vertical refresh
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) VESA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) VESA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) VESA(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) VESA(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) VESA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) VESA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) VESA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) VESA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) VESA(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) VESA(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) VESA(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) VESA(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 100 (640x400)


(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): <default>: Using hsync range of 30.00-81.00 kHz
(II) VESA(0): <default>: Using vrefresh range of 56.00-75.00 Hz
(II) VESA(0): <default>: Using maximum pixel clock of 145.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1920x1440" (no mode of this name)
(II) VESA(0): Not using built-in mode "1856x1392" (no mode of this name)
(II) VESA(0): Not using built-in mode "1792x1344" (no mode of this name)
(II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
(II) VESA(0): Not using built-in mode "1400x1050" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x350" (no mode of this name)
(II) VESA(0): Not using built-in mode "512x384" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1280x960"
(**) VESA(0): *Built-in mode "1152x864"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): *Built-in mode "720x400"
(**) VESA(0): Display dimensions: (470, 300) mm
(**) VESA(0): DPI set to (69, 86)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 11.21
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(II) VESA(0): virtual address = 0x7f66c63b4000,
physical address = 0xd0000000, size = 16777216
(II) VESA(0): Setting up VESA Mode 0x124 (1280x1024)
(II) VESA(0): VBESetVBEMode failed, mode set without customized refresh.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logii350"
(**) Option "xkb_layout" "de,us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logii350"
(**) Option "xkb_layout" "de,us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event1"
(II) Logitech USB Receiver: Found 9 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Microsoft LifeCam-VX700  v2.0 (/dev/input/event7)
(**) Microsoft LifeCam-VX700  v2.0: Applying InputClass "evdev keyboard catchall"
(**) Microsoft LifeCam-VX700  v2.0: always reports core events
(**) Microsoft LifeCam-VX700  v2.0: Device: "/dev/input/event7"
(II) Microsoft LifeCam-VX700  v2.0: Found keys
(II) Microsoft LifeCam-VX700  v2.0: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft LifeCam-VX700  v2.0" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logii350"
(**) Option "xkb_layout" "de,us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
(II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event6)
(**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
(**) IR-receiver inside an USB DVB receiver: always reports core events
(**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event6"
(II) IR-receiver inside an USB DVB receiver: Found keys
(II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logii350"
(**) Option "xkb_layout" "de,us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "logii350"
(**) Option "xkb_layout" "de,us"
(**) Option "xkb_options" "lv3:ralt_switch,compose:lwin,grp:alt_shift_toggle"
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)


[towo]

Also, wie Du selbst sehen solltest, wird da Vesa verwendet!
vga=791 darfst Du auch gleich von der Grub-Konfig entsorgen.
Außerdem würde ich gerne mal ein

dpkg -l | grep xorg-video

sehen.

[oschi]

Code: [Select]


dpkg -l | grep xorg-video
ii  xserver-xorg-video-apm                     1:1.2.2-2                    X.Org X server -- APM display driver
ii  xserver-xorg-video-ark                     1:0.7.2-2                    X.Org X server -- ark display driver
ii  xserver-xorg-video-chips                   1:1.2.3-1                    X.Org X server -- Chips display driver
ii  xserver-xorg-video-cirrus                  1:1.3.2-2                    X.Org X server -- Cirrus display driver
ii  xserver-xorg-video-fbdev                   1:0.4.2-2                    X.Org X server -- fbdev display driver
ii  xserver-xorg-video-i128                    1:1.3.3-2                    X.Org X server -- i128 display driver
ii  xserver-xorg-video-i740                    1:1.3.2-2                    X.Org X server -- i740 display driver
ii  xserver-xorg-video-intel                   2:2.13.0-5                   X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-mach64                  6.8.2-3                      X.Org X server -- ATI Mach64 display driver
ii  xserver-xorg-video-mga                     1:1.4.11.dfsg-4+squeeze1     X.Org X server -- MGA display driver
ii  xserver-xorg-video-neomagic                1:1.2.4-3                    X.Org X server -- Neomagic display driver
ii  xserver-xorg-video-nv                      1:2.1.17-3                   X.Org X server -- NV display driver
ii  xserver-xorg-video-openchrome              1:0.2.904+svn842-2           X.Org X server -- VIA display driver
ii  xserver-xorg-video-r128                    6.8.1-3                      X.Org X server -- ATI r128 display driver
ii  xserver-xorg-video-radeon                  1:6.13.1-2+squeeze1          X.Org X server -- AMD/ATI Radeon display driver
ii  xserver-xorg-video-rendition               1:4.2.3-3                    X.Org X server -- Rendition display driver
ii  xserver-xorg-video-s3                      1:0.6.3-2                    X.Org X server -- legacy S3 display driver
ii  xserver-xorg-video-s3virge                 1:1.10.4-2                   X.Org X server -- S3 ViRGE display driver
ii  xserver-xorg-video-savage                  1:2.3.1-2                    X.Org X server -- Savage display driver
ii  xserver-xorg-video-siliconmotion           1:1.7.3-2                    X.Org X server -- SiliconMotion display driver
ii  xserver-xorg-video-sis                     1:0.10.3-1                   X.Org X server -- SiS display driver
ii  xserver-xorg-video-sisusb                  1:0.9.3-2                    X.Org X server -- SiS USB display driver
ii  xserver-xorg-video-tdfx                    1:1.4.3-2                    X.Org X server -- tdfx display driver
ii  xserver-xorg-video-trident                 1:1.3.3-2                    X.Org X server -- Trident display driver
ii  xserver-xorg-video-tseng                   1:1.2.3-2                    X.Org X server -- Tseng display driver
ii  xserver-xorg-video-vesa                    1:2.3.0-3                    X.Org X server -- VESA display driver
ii  xserver-xorg-video-vmware                  1:11.0.1-2                   X.Org X server -- VMware display driver
ii  xserver-xorg-video-voodoo                  1:1.2.3-2                    X.Org X server -- Voodoo display driver


[oschi]

das mit dem vesa stimmt natürlich....

und wie behebe ich das?

mfg
oschi

[towo]

apt-get install xserver-xorg-video-ati und das

vga=791

rausschmeissen!

[oschi]

nach sauberem deinstallieren von xserver-xorg-video-ati und sauberem deinstallieren von fglrx und installieren von xserver-xorg-video-ati läufts jetzt...

vielen dank für die hilfe

probleme bereitet im moment noch die hardwarebeschleunigung für die desktop-effekte
im moment geht nur der softwar-render, und der ist langsam

daran muss ich noch arbeiten...

mfg

oschi

[oschi]

jetzt muss ich leider noch mal fragen.....

der treiber funktioniert soweit, allerdings kann ich keine hardware-beschleiunigten desktop-effekte nutzen, da sich opengl nicht mehr aktivieren lässt. irgendwie komm ich da nicht weiter...

mfg
oschi