Nach dam aktuellen DU mit fglrx, funktioniert mein HDMI ausgang nicht mehr.
Wenn ich es richtig sehe, scheint er beide Bildschirme zusehen, oder irre ich mich da?
xrandr --verbose
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 1600 x 1600
LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm
Identifier: 0x95
Timestamp: 503140
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
BACKLIGHT: 18 (0x00000012) range: (0,24)
SignalFormat: DisplayPort
ConnectorType: Panel
1366x768 (0x98) 69.3MHz +HSync +VSync *current +preferred
h: width 1366 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 768 start 770 end 774 total 782 clock 59.6Hz
1280x768 (0x99) 69.3MHz +HSync +VSync +preferred
h: width 1280 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 768 start 770 end 774 total 782 clock 59.6Hz
1280x720 (0x9a) 69.3MHz +HSync +VSync +preferred
h: width 1280 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 720 start 770 end 774 total 782 clock 59.6Hz
1024x768 (0x9b) 69.3MHz +HSync +VSync +preferred
h: width 1024 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 768 start 770 end 774 total 782 clock 59.6Hz
1280x600 (0x9c) 69.3MHz +HSync +VSync +preferred
h: width 1280 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 600 start 770 end 774 total 782 clock 59.6Hz
1024x600 (0x9d) 69.3MHz +HSync +VSync +preferred
h: width 1024 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 600 start 770 end 774 total 782 clock 59.6Hz
800x600 (0x9e) 69.3MHz +HSync +VSync +preferred
h: width 800 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 600 start 770 end 774 total 782 clock 59.6Hz
800x480 (0x9f) 69.3MHz +HSync +VSync +preferred
h: width 800 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 480 start 770 end 774 total 782 clock 59.6Hz
720x480 (0xa0) 69.3MHz +HSync +VSync +preferred
h: width 720 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 480 start 770 end 774 total 782 clock 59.6Hz
640x480 (0xa1) 69.3MHz +HSync +VSync +preferred
h: width 640 start 1398 end 1430 total 1486 skew 0 clock 46.6KHz
v: height 480 start 770 end 774 total 782 clock 59.6Hz
DFP1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x96
Timestamp: 503140
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
SignalFormat: unknown
ConnectorType: unknown
CRT1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x97
Timestamp: 503140
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
SignalFormat: VGA
ConnectorType: VGA
ich@laptop1:~$
infobash -v3
Host/Kernel/OS "laptop1" running Linux 2.6.39-2.slh.1-aptosid-amd64 x86_64 [ aptosid 2010-02 Κῆρες - kde-lite - (201009132215) ]
CPU Info 2x AMD Athlon II P320 Dual-Core 512 KB cache flags( sse3 ht nx lm svm ) clocked at [ 800.000 MHz ]
Videocard ATI M880G [Mobility Radeon HD 4200] X.Org 1.10.2 [ 1366x768@59.6hz ]
Network cards Realtek RTL8101E/RTL8102E PCI Express Fast
Broadcom BCM4313 802.11b/g/n Wireless LAN
Processes 141 | Uptime 15min | Memory 829.2/3712.1MB | HDD Hitachi HTS54503 Size 320GB (78%used) | GLX Renderer ATI Mobility Radeon HD 4200 Series | GLX Version 3.3.10834 Compatibility Profile Context | Client Shell | Infobash v3.36
Geht scheinbar wieder. Hab nur keine ahnung warum .. ;(
Zumindest funktioniert es, wenn beim neustart der Fernseher am Laptop hängt ....