Hi,
habe mir gerade mal das sehr umfangreiche Update angetan. Erfahrungsbericht:
1) Vier Fatal-Meldungen
Fatal: module xhci
...zfcp
...dasd-diag-mod
...dasd-fba-mod
2) Iceweasel startet auf halber Briefmarkengröße.
Ansonsten alles gut. Module scheinen bisher kein Problem zu sein.[/code]
1) ist nicht FATAL
Im Zuge des Umstiegs auf das offizielle kernel.org Tool "kmod" als Ersatz(*) für das alte "modprobe" hat Debian auch das "update-initramfs" verbessern wollen. In den neu generierten initrd Startdateien sollen ein paar Module geladen werden, die es bei siduction gar nicht gibt, weil sie nicht gebraucht werden.
2) iceweasel ist bei mir alles im grünen.
(*) modprobe,insmod,rmod sind jetzt alle nur noch Symlinks zu kmod.
Wie auch immer aber mit diesem Kernel kommt X nicht hoch. Zumindest nicht innerhalb von 10 Minuten, dann hatte ich den alten Kernel gebootet.
CPU Last 100%, die Platte rödelt sich einen Wolf, dbus-message-irgendwas zieht wohl die Rechenzeit hoch.
@OppaErich, du kannst mal versuchen
update-initramfs -u -k 3.2-9.towo.2-siduction-amd64
(oder deine neueste -x86- Kernel Version nach "/boot/vmlinuz-" )
nach einem DU (apt-get update && apt-get dist-upgrade)
root@oppa-mag:~# update-initramfs -u -k 3.2-9.towo.2-siduction-i386
/boot/initrd.img-3.2-9.towo.2-siduction-i386 does not exist. Cannot update.
root@oppa-mag:~# update-initramfs -u -k 3.2-9.towo.2-siduction-i686
/boot/initrd.img-3.2-9.towo.2-siduction-i686 does not exist. Cannot update.
root@oppa-mag:~# locate 3.2-9.towo.2
/var/cache/apt/archives/linux-image-3.2-9.towo.2-siduction-686_3.2.0-21_i386.deb
Sorry, 32 Bit hier. Der scheint gar nicht installiert worden zu sein. Ich hab' ja genug zur Auswahl. Ich wollte nur darauf hinweisen dass da wohl doch etwas FATALes dabei ist.
Uups, zeig mal
ls -ll /boot
Wenn die initrd Datein nicht exisitiert kein "-u" update sondern "-c" creation so:
update-initramfs -c -k 3.2-9.towo.2-siduction-i686
root@oppa-mag:~# ls -ll /boot
insgesamt 43368
-rw-r--r-- 1 root root 117632 Dez 9 22:28 config-3.1-5.slh.1-aptosid-686
-rw-r--r-- 1 root root 119606 Mär 1 12:40 config-3.2-9.towo.1-siduction-686
-rw-r--r-- 1 root root 119588 Mär 5 18:25 config-3.2-9.towo.2-siduction-686
drwxr-xr-x 3 root root 12288 Mär 7 16:58 grub
-rw-r--r-- 1 root root 10394108 Feb 22 16:43 initrd.img-3.1-5.slh.1-aptosid-686
-rw-r--r-- 1 root root 10560813 Mär 3 10:59 initrd.img-3.2-9.towo.1-siduction-686
-rw-r--r-- 1 root root 10651507 Mär 7 17:00 initrd.img-3.2-9.towo.2-siduction-686
-rw-r--r-- 1 root root 176764 Okt 25 02:27 memtest86+.bin
-rw-r--r-- 1 root root 178944 Okt 25 02:27 memtest86+_multiboot.bin
-rw-r--r-- 1 root root 1484574 Dez 9 22:28 System.map-3.1-5.slh.1-aptosid-686
-rw-r--r-- 1 root root 1500506 Mär 1 12:40 System.map-3.2-9.towo.1-siduction-686
-rw-r--r-- 1 root root 1500506 Mär 5 18:25 System.map-3.2-9.towo.2-siduction-686
-rw-r--r-- 1 root root 2508640 Dez 9 22:28 vmlinuz-3.1-5.slh.1-aptosid-686
-rw-r--r-- 1 root root 2527200 Mär 1 12:40 vmlinuz-3.2-9.towo.1-siduction-686
-rw-r--r-- 1 root root 2527168 Mär 5 18:24 vmlinuz-3.2-9.towo.2-siduction-686
HUH :? Ist doch alles da.
Nee, jetzt sehe ich's. -686 ohne i !
root@oppa-mag:~# update-initramfs -u -k 3.2-9.towo.2-siduction-686
update-initramfs: Generating /boot/initrd.img-3.2-9.towo.2-siduction-686
FATAL: Module xhci not found.
FATAL: Module zfcp not found.
FATAL: Module i2o_block not found.
FATAL: Module dasd_diag_mod not found.
FATAL: Module dasd_eckd_mod not found.
FATAL: Module dasd_fba_mod not found.
root@oppa-mag:~#
Dasselbe wie beim d-u.
Ja, die Fehlermeldungen bleiben gleich und sind eigentlich nicht schlimm.
@OppaErich, ich hatte in den letzten Tagen des Öfteren Upgrades des initramfs Tools gesehen, und Dir deswegen ein manuelles update-initramfs empfohlen.
Löppt Dein System denn jetzt besser und ohne "CPU Last 100%" ?
So, nun hat es mir beim booten verraten wo der Schuh drückt. Die Kernel-Header waren nicht installiert, da fehlt mir wohl noch ein Metapaket. Nun ist alles Gut.