kworker nimmt fast 100% cpu für sich in Anspruch nach dem letzten du auf: Linux 2.6.36-0.slh.1-aptosid-amd64 x86_64
Die Kernel-Vorgängerversion: Linux 2.6.35-7.slh.4-aptosid-amd64 x86_64 verhält sich normal. Dort erscheint kworker nicht einmal in der Prozessliste
Hat jemand einen Tipp?
Gruß,
Michael
Hi Michael,
das Verhalten kann ich bestätigen, ist bei mir genauso. 100% CPU-Last über mehrere Minuten, danach beruhigt sich die Lage wieder.
@bluelupo, bezieht sich das jetzt auf den neuen 2.6.36-0.slh.2 ?
Oder ist Dein Kommentar beim Schreiben schon veraltet gewesen...
@ralul: bezieht sich auf 2.6.36-0.slh.2-aptosid-amd64 und ist auch ein bekanntes Problem https://bugzilla.kernel.org/show_bug.cgi?id=20232
habe heute den aktuellen kernel 2.6.36-0.slh.2-amd64 installiert. Kworker lastet die CPU immer noch voll aus, so dass ich zum 2.6.35-7.slh.4-amd64 zurückgekehrt bin. Der bugzilla Eintrag ergibt Sinn.
Grüße,
Michael
könnt ihr bitte mal hardware specs posten.
hier ist krunner vollkommen unauffällig.
bitte den output von dmesg, lspci -nn und lsusb -vv
damit kann man dann evtl. vergleiche anstellen.
greetz
devil
Hi devil,
hier die Ausgaben von dmesg, lspci und lsusb.
# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93)
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
02:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
03:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380]
# lsusb -vv
Bus 008 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc517 LX710 Cordless Desktop Laser
bcdDevice 38.10
iManufacturer 1 Logitech
iProduct 2 USB Receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 59
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 177
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 006: ID 0c4b:0400 Reiner SCT Kartensysteme GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0c4b Reiner SCT Kartensysteme GmbH
idProduct 0x0400
bcdDevice 0.01
iManufacturer 1 Reiner-SCT
iProduct 2 cyberJack e-com(a)
iSerial 3 0679700133
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 93
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
** UNRECOGNIZED: 36 21 00 10 00 07 03 00 00 00 a0 0f 00 00 40 1f 00 00 00 58 27 00 00 90 d0 03 00 00 fe 00 00 00 07 00 00 00 00 00 00 00 30 00 01 00 0e 01 00 00 ff ff 00 00 03 01
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 005: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0606 USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e0
Ganged power switching
Ganged overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 004: ID 058f:6331 Alcor Micro Corp. SD/MMC/MS Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x058f Alcor Micro Corp.
idProduct 0x6331 SD/MMC/MS Card Reader
bcdDevice 1.02
iManufacturer 1 Generic
iProduct 2 Mass Storage Device
iSerial 3 058F0O1111B
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 250mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x5355
Self Powered
Test Mode
Debug Mode
Bus 001 Device 003: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. transcend storejet 25P
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x2329 transcend storejet 25P
bcdDevice 1.00
iManufacturer 10 MEDION
iProduct 11 MEDION Drive-n-go
iSerial 5 090216FB0400
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 6 MSC Bulk-Only Transfer
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x5301
Self Powered
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0606 USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
bcdDevice 7.02
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e0
Ganged power switching
Ganged overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0503 highspeed power enable connect
Port 4: 0000.0503 highspeed power enable connect
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 2.06
iManufacturer 3 Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Port 4: 0000.0503 highspeed power enable connect
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
dmesg Output unter http://pastebin.com/uKB522HX
Hi Devil,
hier die Ausgaben mit laufendem kernel: 2.6.36-0.slh.2-aptosid-amd64.
dmesg
[code]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-0.slh.2-aptosid-amd64 (Debian 2.6.36-2) (s.l-h@gmx.de) (gcc version 4.4.5 (Debian 4.4.5-5) ) #1 SMP PREEMPT Sat Oct 30 12:20:40 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-0.slh.2-aptosid-amd64 root=UUID=8a97a833-ed39-4507-a3e4-cf57c77e06d3 ro vga=791 quiet nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd780000 (usable)
[ 0.000000] BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbd780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bd780000
[ 0.000000] 0000000000 - 00bd600000 page 2M
[ 0.000000] 00bd600000 - 00bd780000 page 4k
[ 0.000000] kernel direct mapping tables up to bd780000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ b000-15000
[ 0.000000] RAMDISK: 374a7000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f9ad0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bd780100 0006C (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bd780290 000F4 (v04 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bd780660 05B85 (v02 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bd78e000 00040
[ 0.000000] ACPI: APIC 00000000bd780390 0008C (v02 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bd780420 0003C (v01 DELL OEMMCFG 20091209 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bd780460 00176 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bd7805e0 00080 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bd78e040 00072 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bd78a660 00038 (v01 DELL OEMHPET 20091209 MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000bd78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bd790b90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] bootmap [0000000100005000 - 000000010004cfff] pages 48
[ 0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0001000000 - 0001670088] TEXT DATA BSS ==> [0001000000 - 0001670088]
[ 0.000000] #1 [00374a7000 - 0037ff0000] RAMDISK ==> [00374a7000 - 0037ff0000]
[ 0.000000] #2 [0001671000 - 0001671183] BRK ==> [0001671000 - 0001671183]
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #5 [0000095800 - 00000fc690] BIOS reserved ==> [0000095800 - 00000fc690]
[ 0.000000] #6 [00000fc80c - 00000ff780] BIOS reserved ==> [00000fc80c - 00000ff780]
[ 0.000000] #7 [00000fc690 - 00000fc80c] MP-table mpc ==> [00000fc690 - 00000fc80c]
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #10 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #11 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000]
[ 0.000000] #13 [0100005000 - 010004d000] BOOTMAP ==> [0100005000 - 010004d000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880100200000-ffff8801071fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000bd780
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2086676
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 118 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757688 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000
[ 0.000000] PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000
[ 0.000000] PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:40e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001800000 s86016 r8192 d20480 u262144
[ 0.000000] pcpu-alloc: s86016 r8192 d20480 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc:
- 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2054302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-0.slh.2-aptosid-amd64 root=UUID=8a97a833-ed39-4507-a3e4-cf57c77e06d3 ro vga=791 quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8146668k/9437184k available (3644k kernel code, 1090480k absent, 200036k reserved, 1668k data, 680k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2792.411 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5584.82 BogoMIPS (lpj=2792411)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000019] Security Framework initialized
[ 0.000021] SELinux: Disabled at boot.
[ 0.000618] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002323] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003054] Mount-cache hash table entries: 256
[ 0.003136] Initializing cgroup subsys ns
[ 0.003139] Initializing cgroup subsys cpuacct
[ 0.003142] Initializing cgroup subsys devices
[ 0.003143] Initializing cgroup subsys freezer
[ 0.003144] Initializing cgroup subsys net_cls
[ 0.003146] Initializing cgroup subsys blkio
[ 0.003167] CPU: Physical Processor ID: 0
[ 0.003169] CPU: Processor Core ID: 0
[ 0.003173] mce: CPU supports 9 MCE banks
[ 0.003184] CPU0: Thermal monitoring enabled (TM1)
[ 0.003191] using mwait in idle threads.
[ 0.003192] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.003198] ... version: 3
[ 0.003199] ... bit width: 48
[ 0.003200] ... generic registers: 4
[ 0.003201] ... value mask: 0000ffffffffffff
[ 0.003202] ... max period: 000000007fffffff
[ 0.003203] ... fixed-purpose events: 3
[ 0.003204] ... event mask: 000000070000000f
[ 0.003947] ACPI: Core revision 20100702
[ 0.030607] Setting APIC routing to flat
[ 0.030934] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040917] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.146143] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.790978] Brought up 8 CPUs
[ 0.790981] Total of 8 processors activated (44679.99 BogoMIPS).
[ 0.793985] devtmpfs: initialized
[ 0.794208] regulator: core version 0.5
[ 0.794263] regulator: dummy:
[ 0.794284] NET: Registered protocol family 16
[ 0.794456] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.794458] ACPI: bus type pci registered
[ 0.794541] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.794543] PCI: not using MMCONFIG
[ 0.794544] PCI: Using configuration type 1 for base access
[ 0.795437] bio: create slab <bio-0> at 0
[ 0.796191] ACPI: EC: Look up EC in DSDT
[ 0.796918] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.799899] ACPI: SSDT 00000000bd78e0c0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.800168] ACPI: Dynamic OEM Table Load:
[ 0.800170] ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.800373] ACPI: SSDT 00000000bd790510 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.800594] ACPI: Dynamic OEM Table Load:
[ 0.800596] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.801071] ACPI: Interpreter enabled
[ 0.801073] ACPI: (supports S0 S3 S4 S5)
[ 0.801185] ACPI: Using IOAPIC for interrupt routing
[ 0.801256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.803329] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.843814] ACPI: No dock devices found.
[ 0.843817] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.844040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.844242] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.844245] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.844247] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.844249] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.844251] pci_root PNP0A08:00: host bridge window [mem 0xbe000000-0xdfffffff]
[ 0.844253] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.844339] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.844343] pci 0000:00:03.0: PME# disabled
[ 0.844663] pci 0000:00:16.0: reg 10: [mem 0xf7ffe000-0xf7ffe00f 64bit]
[ 0.844735] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.844740] pci 0000:00:16.0: PME# disabled
[ 0.844791] pci 0000:00:1a.0: reg 10: [mem 0xf7ffc000-0xf7ffc3ff]
[ 0.844863] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.844868] pci 0000:00:1a.0: PME# disabled
[ 0.844903] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 0.844959] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.844963] pci 0000:00:1b.0: PME# disabled
[ 0.845033] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.845037] pci 0000:00:1c.0: PME# disabled
[ 0.845109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.845113] pci 0000:00:1c.1: PME# disabled
[ 0.845187] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.845191] pci 0000:00:1c.5: PME# disabled
[ 0.845237] pci 0000:00:1d.0: reg 10: [mem 0xf7ff6000-0xf7ff63ff]
[ 0.845309] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.845314] pci 0000:00:1d.0: PME# disabled
[ 0.845511] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.845519] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.845528] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.845536] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.845542] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.845550] pci 0000:00:1f.2: reg 24: [mem 0xf7ff4000-0xf7ff47ff]
[ 0.845583] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.845586] pci 0000:00:1f.2: PME# disabled
[ 0.845615] pci 0000:00:1f.3: reg 10: [mem 0xf7fee000-0xf7fee0ff 64bit]
[ 0.845636] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.845702] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.845712] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.845722] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.845728] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.845734] pci 0000:01:00.0: reg 30: [mem 0xfbde0000-0xfbdfffff pref]
[ 0.845761] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.845764] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.845767] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.845771] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.845810] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.845813] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.845817] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.845823] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.845898] pci 0000:03:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit]
[ 0.845910] pci 0000:03:00.0: reg 18: [io 0xe800-0xe8ff]
[ 0.845985] pci 0000:03:00.0: supports D2
[ 0.845987] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.845992] pci 0000:03:00.0: PME# disabled
[ 0.846012] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.846016] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.846020] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.846026] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846105] pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.846200] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.846205] pci 0000:04:00.0: PME# disabled
[ 0.846236] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.846239] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.846243] pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.846249] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846307] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.846311] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.846315] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.846320] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846322] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.846324] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.846326] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.846328] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.846331] pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff] (subtractive decode)
[ 0.846333] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.846354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.846500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.846573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.846615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[ 0.846672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.857895] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.857955] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.858017] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.858079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.858140] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.858202] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.858263] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.858325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.858376] HEST: Table is not found!
[ 0.858453] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.858456] vgaarb: loaded
[ 0.858619] PCI: Using ACPI for IRQ routing
[ 0.858621] PCI: pci_cache_line_size set to 64 bytes
[ 0.858685] reserve RAM buffer: 0000000000095800 - 000000000009ffff
[ 0.858687] reserve RAM buffer: 00000000bd780000 - 00000000bfffffff
[ 0.858787] NetLabel: Initializing
[ 0.858789] NetLabel: domain hash size = 128
[ 0.858790] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.858799] NetLabel: unlabeled traffic allowed by default
[ 0.858805] alloc irq_desc for 40 on node -1
[ 0.858806] alloc kstat_irqs on node -1
[ 0.858811] alloc irq_desc for 41 on node -1
[ 0.858812] alloc kstat_irqs on node -1
[ 0.858816] alloc irq_desc for 42 on node -1
[ 0.858818] alloc kstat_irqs on node -1
[ 0.858822] alloc irq_desc for 43 on node -1
[ 0.858823] alloc kstat_irqs on node -1
[ 0.858826] alloc irq_desc for 44 on node -1
[ 0.858827] alloc kstat_irqs on node -1
[ 0.858830] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.858838] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.858842] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.861794] hpet: hpet2 irq 40 for MSI
[ 0.861865] hpet: hpet3 irq 41 for MSI
[ 0.862901] hpet: hpet4 irq 42 for MSI
[ 0.863896] hpet: hpet5 irq 43 for MSI
[ 0.864920] hpet: hpet6 irq 44 for MSI
[ 0.868906] Switching to clocksource tsc
[ 0.868934] pnp: PnP ACPI init
[ 0.868940] ACPI: bus type pnp registered
[ 0.870896] pnp: PnP ACPI: found 14 devices
[ 0.870898] ACPI: ACPI bus type pnp unregistered
[ 0.870907] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.870910] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.870912] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.870921] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.870927] system 00:06: [io 0x0a00-0x0a0f] has been reserved
[ 0.870930] system 00:06: [io 0x0a10-0x0a1f] has been reserved
[ 0.870932] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.870935] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.870939] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.870941] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.870943] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.870945] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.870947] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.870950] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.870954] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.870959] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.870962] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.870966] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.870971] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.870974] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.870976] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.870978] system 00:0d: [mem 0x00100000-0xbdffffff] could not be reserved
[ 0.870980] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.878469] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbe000000-0xbe1fffff]
[ 0.878472] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878475] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878477] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878479] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.878498] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.878500] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.878502] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.878506] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.878508] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.878512] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.878514] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.878535] pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff]
[ 0.878538] pci 0000:00:1c.0: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878543] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.878545] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.878549] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.878569] pci 0000:00:1c.1: bridge window [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878574] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.878576] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.878580] pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.878583] pci 0000:00:1c.5: bridge window [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878605] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.878606] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.878610] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.878613] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.878641] alloc irq_desc for 16 on node -1
[ 0.878642] alloc kstat_irqs on node -1
[ 0.878647] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.878650] pci 0000:00:03.0: setting latency timer to 64
[ 0.878656] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.878676] alloc irq_desc for 17 on node -1
[ 0.878677] alloc kstat_irqs on node -1
[ 0.878680] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.878683] pci 0000:00:1c.0: setting latency timer to 64
[ 0.878689] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.878692] pci 0000:00:1c.1: setting latency timer to 64
[ 0.878715] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.878717] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.878720] pci 0000:00:1c.5: setting latency timer to 64
[ 0.878725] pci 0000:00:1e.0: setting latency timer to 64
[ 0.878728] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.878746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.878748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.878749] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.878751] pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff]
[ 0.878752] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.878754] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.878755] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbdfffff]
[ 0.878757] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.878759] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.878760] pci_bus 0000:02: resource 1 [mem 0xbe000000-0xbe1fffff]
[ 0.878762] pci_bus 0000:02: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878763] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.878782] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.878783] pci_bus 0000:03: resource 2 [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878785] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.878786] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.878788] pci_bus 0000:04: resource 2 [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878790] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.878791] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.878793] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.878794] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.878796] pci_bus 0000:05: resource 8 [mem 0xbe000000-0xdfffffff]
[ 0.878797] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.878832] NET: Registered protocol family 2
[ 0.879172] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.880672] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.885064] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.885569] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.885571] TCP reno registered
[ 0.885600] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.885710] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.885925] NET: Registered protocol family 1
[ 0.886072] pci 0000:01:00.0: Boot video device
[ 0.886096] PCI: CLS 32 bytes, default 64
[ 0.886163] Unpacking initramfs...
[ 1.274548] Freeing initrd memory: 11556k freed
[ 1.277500] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.277504] Placing 64MB software IO TLB between ffff880001e74000 - ffff880005e74000
[ 1.277505] software IO TLB at phys 0x1e74000 - 0x5e74000
[ 1.279932] audit: initializing netlink socket (disabled)
[ 1.279939] type=2000 audit(1288476253.676:1): initialized
[ 1.280335] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.282600] VFS: Disk quotas dquot_6.5.2
[ 1.282701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.282841] msgmni has been set to 15934
[ 1.283128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.283131] io scheduler noop registered
[ 1.283132] io scheduler deadline registered
[ 1.283207] io scheduler cfq registered (default)
[ 1.285055] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011800000, using 1536k, total 1536k
[ 1.285057] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 1.285059] vesafb: scrolling: redraw
[ 1.285061] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.374864] Console: switching to colour frame buffer device 128x48
[ 1.461202] fb0: VESA VGA frame buffer device
[ 1.461237] intel_idle: MWAIT substates: 0x1120
[ 1.461238] intel_idle: v0.4 model 0x1E
[ 1.461239] intel_idle: lapic_timer_reliable_states 0x2
[ 1.461594] ERST: Table is not found!
[ 1.461843] Linux agpgart interface v0.103
[ 1.461845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.462564] Fixed MDIO Bus: probed
[ 1.462743] PNP: No PS/2 controller found. Probing ports directly.
[ 1.463240] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.463244] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.463379] mice: PS/2 mouse device common for all mice
[ 1.464562] cpuidle: using governor ladder
[ 1.466768] cpuidle: using governor menu
[ 1.467053] TCP cubic registered
[ 1.467233] NET: Registered protocol family 10
[ 1.467719] lo: Disabled Privacy Extensions
[ 1.467999] Registering the dns_resolver key type
[ 1.468144] registered taskstats version 1
[ 1.468616] Freeing unused kernel memory: 680k freed
[ 1.520820] udev[661]: starting version 164
[ 1.553914] usbcore: registered new interface driver usbfs
[ 1.553938] usbcore: registered new interface driver hub
[ 1.553968] usbcore: registered new device driver usb
[ 1.560771] SCSI subsystem initialized
[ 1.578995] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.579001] firewire_ohci 0000:03:00.0: setting latency timer to 64
[ 1.582466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.582481] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.582498] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.582501] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.582515] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.582546] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.586507] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.586521] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[ 1.591098] libata version 3.00 loaded.
[ 1.595197] tg3.c:v3.113 (August 2, 2010)
[ 1.595208] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.595230] tg3 0000:04:00.0: setting latency timer to 64
[ 1.595552] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.595566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.595568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595569] usb usb1: Product: EHCI Host Controller
[ 1.595571] usb usb1: Manufacturer: Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
[ 1.595572] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.595648] hub 1-0:1.0: USB hub found
[ 1.595651] hub 1-0:1.0: 2 ports detected
[ 1.595721] alloc irq_desc for 23 on node -1
[ 1.595723] alloc kstat_irqs on node -1
[ 1.595727] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.595750] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.595753] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.595758] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.595781] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.599655] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.599665] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[ 1.605220] tg3 mdio bus: probed
[ 1.606532] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.606546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.606549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606550] usb usb2: Product: EHCI Host Controller
[ 1.606552] usb usb2: Manufacturer: Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
[ 1.606553] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.606618] hub 2-0:1.0: USB hub found
[ 1.606622] hub 2-0:1.0: 2 ports detected
[ 1.606715] ahci 0000:00:1f.2: version 3.0
[ 1.606724] alloc irq_desc for 19 on node -1
[ 1.606725] alloc kstat_irqs on node -1
[ 1.606729] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.606763] alloc irq_desc for 45 on node -1
[ 1.606764] alloc kstat_irqs on node -1
[ 1.606770] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.606779] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.606796] ahci: SSS flag set, parallel bus scan disabled
[ 1.612976] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:25:64:ee:0d:d5
[ 1.612995] tg3 0000:04:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
[ 1.612998] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.612999] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.617535] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
[ 1.617539] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.617543] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.625558] scsi0 : ahci
[ 1.625614] scsi1 : ahci
[ 1.625656] scsi2 : ahci
[ 1.625773] scsi3 : ahci
[ 1.625816] scsi4 : ahci
[ 1.625860] scsi5 : ahci
[ 1.626011] ata1: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4100 irq 45
[ 1.626013] ata2: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4180 irq 45
[ 1.626016] ata3: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4200 irq 45
[ 1.626018] ata4: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4280 irq 45
[ 1.626019] ata5: DUMMY
[ 1.626021] ata6: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4380 irq 45
[ 1.631584] alloc irq_desc for 46 on node -1
[ 1.631586] alloc kstat_irqs on node -1
[ 1.631596] firewire_ohci 0000:03:00.0: irq 46 for MSI/MSI-X
[ 1.631624] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 1.896958] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.929932] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.930995] ata1.00: ATA-8: ST31000528AS, CC45, max UDMA/133
[ 1.930998] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.932216] ata1.00: configured for UDMA/133
[ 1.943005] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC45 PQ: 0 ANSI: 5
[ 2.011102] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.011105] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.011250] hub 1-1:1.0: USB hub found
[ 2.011353] hub 1-1:1.0: 6 ports detected
[ 2.113550] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.131511] firewire_core: created device fw0: GUID 0025648000ee0dd5, S400
[ 2.227823] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.227826] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.227968] hub 2-1:1.0: USB hub found
[ 2.228072] hub 2-1:1.0: 8 ports detected
[ 2.302371] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 2.388846] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.388849] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.388850] usb 1-1.1: Product: USB2.0 Hub
[ 2.389197] hub 1-1.1:1.0: USB hub found
[ 2.389574] hub 1-1.1:1.0: 4 ports detected
[ 2.464092] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[ 2.550174] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1003
[ 2.550176] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.550178] usb 1-1.2: Product: External HDD
[ 2.550180] usb 1-1.2: Manufacturer: Western Digital
[ 2.550181] usb 1-1.2: SerialNumber: 57442D574341563530323635353839
[ 2.556058] Initializing USB Mass Storage driver...
[ 2.556149] scsi6 : usb-storage 1-1.2:1.0
[ 2.556231] usbcore: registered new interface driver usb-storage
[ 2.556233] USB Mass Storage support registered.
[ 2.623673] usb 1-1.4: new high speed USB device using ehci_hcd and address 5
[ 2.664520] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.665595] ata2.00: ATA-8: ST31000528AS, CC45, max UDMA/133
[ 2.665597] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.666799] ata2.00: configured for UDMA/133
[ 2.677575] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC45 PQ: 0 ANSI: 5
[ 2.709491] usb 1-1.4: New USB device found, idVendor=1058, idProduct=1001
[ 2.709494] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.709496] usb 1-1.4: Product: External HDD
[ 2.709497] usb 1-1.4: Manufacturer: Western Digital
[ 2.709498] usb 1-1.4: SerialNumber: 574341553432373638353233
[ 2.709681] scsi7 : usb-storage 1-1.4:1.0
[ 2.782372] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[ 2.869090] usb 2-1.2: New USB device found, idVendor=18e3, idProduct=9106
[ 2.869092] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.869094] usb 2-1.2: Product: Mass Storage Device
[ 2.869096] usb 2-1.2: Manufacturer: Generic
[ 2.869097] usb 2-1.2: SerialNumber: 18E391066476
[ 2.869486] scsi8 : usb-storage 2-1.2:1.0
[ 2.932281] usb 1-1.1.3: new high speed USB device using ehci_hcd and address 6
[ 3.007526] usb 1-1.1.3: New USB device found, idVendor=05e3, idProduct=0608
[ 3.007528] usb 1-1.1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.007530] usb 1-1.1.3: Product: USB2.0 Hub
[ 3.007910] hub 1-1.1.3:1.0: USB hub found
[ 3.008254] hub 1-1.1.3:1.0: 4 ports detected
[ 3.073037] usb 1-1.1.4: new low speed USB device using ehci_hcd and address 7
[ 3.153627] usb 1-1.1.4: New USB device found, idVendor=413c, idProduct=2003
[ 3.153630] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.153632] usb 1-1.1.4: Product: Dell USB Keyboard
[ 3.153633] usb 1-1.1.4: Manufacturer: Dell
[ 3.273691] usb 1-1.1.3.2: new full speed USB device using ehci_hcd and address 8
[ 3.349435] usb 1-1.1.3.2: New USB device found, idVendor=067b, idProduct=2303
[ 3.349438] usb 1-1.1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.349439] usb 1-1.1.3.2: Product: USB-Serial Controller
[ 3.349441] usb 1-1.1.3.2: Manufacturer: Prolific Technology Inc.
[ 3.399132] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.400826] ata3.00: ATAPI: Optiarc DVD+/-RW AD-7230S, 102B, max UDMA/100
[ 3.407395] ata3.00: configured for UDMA/100
[ 3.412326] usb 1-1.1.3.3: new low speed USB device using ehci_hcd and address 9
[ 3.433602] scsi 2:0:0:0: CD-ROM Optiarc DVD+-RW AD-7230S 102B PQ: 0 ANSI: 5
[ 3.491440] usb 1-1.1.3.3: New USB device found, idVendor=046d, idProduct=c016
[ 3.491443] usb 1-1.1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.491445] usb 1-1.1.3.3: Product: Optical USB Mouse
[ 3.491446] usb 1-1.1.3.3: Manufacturer: Logitech
[ 3.496461] usbcore: registered new interface driver hiddev
[ 3.499543] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input0
[ 3.499575] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.1.4/input0
[ 3.501364] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/input/input1
[ 3.501395] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1.1.3.3/input0
[ 3.501404] usbcore: registered new interface driver usbhid
[ 3.501405] usbhid: USB HID core driver
[ 3.554576] scsi 6:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4
[ 3.708351] scsi 7:0:0:0: Direct-Access WD 10EAVS External 1.05 PQ: 0 ANSI: 4
[ 3.712400] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.712409] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.712476] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.712478] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.712493] sd 0:0:0:0: [sda] Write Protect is off
[ 3.712495] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.712498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.712538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.713387] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.713421] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.713952] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.713954] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.713956] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.714258] sd 7:0:0:0: [sdd] Write Protect is off
[ 3.714260] sd 7:0:0:0: [sdd] Mode Sense: 21 00 00 00
[ 3.714262] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3.715754] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3.716294] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.717657] sdc: sdc1
[ 3.718903] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.719483] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.731123] sdb: sdb1
[ 3.731373] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.749062] sda: sda1 sda2
[ 3.749392] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.868147] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.868639] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.869252] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.869755] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 3.873504] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 3.874117] sd 8:0:0:1: [sdf] Attached SCSI removable disk
[ 3.874858] sd 8:0:0:2: [sdg] Attached SCSI removable disk
[ 3.875484] sd 8:0:0:3: [sdh] Attached SCSI removable disk
[ 4.155634] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.156346] ata4.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, DW10, max UDMA/33
[ 4.158129] ata4.00: configured for UDMA/33
[ 4.170731] scsi 3:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B DW10 PQ: 0 ANSI: 5
[ 4.175282] sdd: sdd1
[ 4.176867] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 4.177442] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 4.475011] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.530105] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.530107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.530169] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.535805] sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 4.535923] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 4.538537] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.538556] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.538577] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.538601] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.538626] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 4.538649] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 4.538665] sd 8:0:0:1: Attached scsi generic sg6 type 0
[ 4.538683] sd 8:0:0:2: Attached scsi generic sg7 type 0
[ 4.538725] sd 8:0:0:3: Attached scsi generic sg8 type 0
[ 4.538750] sr 3:0:0:0: Attached scsi generic sg9 type 5
[ 5.112110] device-mapper: uevent: version 1.0.3
[ 5.112190] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 5.286332] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.454634] udev[1030]: starting version 164
[ 6.842916] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.842921] ACPI: Power Button [PWRB]
[ 6.842962] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.842965] ACPI: Power Button [PWRF]
[ 6.864521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.000475] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.021222] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.072302] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.149230] ACPI: acpi_idle yielding to intel_idle
[ 7.172887] alloc irq_desc for 18 on node -1
[ 7.172890] alloc kstat_irqs on node -1
[ 7.172896] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.321860] rtc_cmos 00:03: RTC can wake from S4
[ 7.321905] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 7.321932] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 7.324260] usbcore: registered new interface driver usbserial
[ 7.324270] USB Serial support registered for generic
[ 7.324291] usbcore: registered new interface driver usbserial_generic
[ 7.324293] usbserial: USB Serial Driver core
[ 7.352089] USB Serial support registered for pl2303
[ 7.352103] pl2303 1-1.1.3.2:1.0: pl2303 converter detected
[ 7.353628] usb 1-1.1.3.2: pl2303 converter now attached to ttyUSB0
[ 7.353642] usbcore: registered new interface driver pl2303
[ 7.353643] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 8.115977] nvidia: module license 'NVIDIA' taints kernel.
[ 8.115979] Disabling lock debugging due to kernel taint
[ 8.190534] alloc irq_desc for 22 on node -1
[ 8.190537] alloc kstat_irqs on node -1
[ 8.190543] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.190666] alloc irq_desc for 47 on node -1
[ 8.190667] alloc kstat_irqs on node -1
[ 8.190675] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 8.190693] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.216751] hda_codec: ALC887: BIOS auto-probing.
[ 8.427862] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.427868] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.427871] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.427985] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010
[ 8.806508] Adding 1044220k swap on /dev/sda2. Priority:-1 extents:1 across:1044220k
[ 8.808952] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.978538] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,barrier=0
[ 9.302862] it87: Found IT8720F chip at 0xa10, revision 8
[ 9.628757] EXT4-fs (sdb1): barriers disabled
[ 9.690844] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,barrier=0
[ 10.371251] fuse init (API version 7.15)
[ 11.232490] alloc irq_desc for 48 on node -1
[ 11.232492] alloc kstat_irqs on node -1
[ 11.232505] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 11.260514] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.596433] NET: Registered protocol family 17
[ 11.613356] tg3 0000:04:00.0
@devil
da ist irgendetwas beim Erstellen der Ausgaben schief gegangen. Ich hatte sie in code-Boxen gepackt, mir danach in der Vorschau angesehen, abgeschickt und nun das hier. Nun habe ich schon wieder den alten Kernel 2.6.35-7.slh.4-aptosid-amd64 laufen.
Hier noch einmal
dmesg:
[code]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36-0.slh.2-aptosid-amd64 (Debian 2.6.36-2) (s.l-h@gmx.de) (gcc version 4.4.5 (Debian 4.4.5-5) ) #1 SMP PREEMPT Sat Oct 30 12:20:40 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-0.slh.2-aptosid-amd64 root=UUID=8a97a833-ed39-4507-a3e4-cf57c77e06d3 ro vga=791 quiet nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000095800 (usable)
[ 0.000000] BIOS-e820: 0000000000095800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd780000 (usable)
[ 0.000000] BIOS-e820: 00000000bd780000 - 00000000bd78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd78e000 - 00000000bd7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd7d0000 - 00000000bd7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd7ed000 - 00000000be000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbd780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bd780000
[ 0.000000] 0000000000 - 00bd600000 page 2M
[ 0.000000] 00bd600000 - 00bd780000 page 4k
[ 0.000000] kernel direct mapping tables up to bd780000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ b000-15000
[ 0.000000] RAMDISK: 374a7000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f9ad0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bd780100 0006C (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bd780290 000F4 (v04 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bd780660 05B85 (v02 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bd78e000 00040
[ 0.000000] ACPI: APIC 00000000bd780390 0008C (v02 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bd780420 0003C (v01 DELL OEMMCFG 20091209 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bd780460 00176 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bd7805e0 00080 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bd78e040 00072 (v01 DELL FX09 20091209 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bd78a660 00038 (v01 DELL OEMHPET 20091209 MSFT 00000097)
[ 0.000000] ACPI: ASF! 00000000bd78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000bd790b90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] bootmap [0000000100005000 - 000000010004cfff] pages 48
[ 0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0001000000 - 0001670088] TEXT DATA BSS ==> [0001000000 - 0001670088]
[ 0.000000] #1 [00374a7000 - 0037ff0000] RAMDISK ==> [00374a7000 - 0037ff0000]
[ 0.000000] #2 [0001671000 - 0001671183] BRK ==> [0001671000 - 0001671183]
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
[ 0.000000] #5 [0000095800 - 00000fc690] BIOS reserved ==> [0000095800 - 00000fc690]
[ 0.000000] #6 [00000fc80c - 00000ff780] BIOS reserved ==> [00000fc80c - 00000ff780]
[ 0.000000] #7 [00000fc690 - 00000fc80c] MP-table mpc ==> [00000fc690 - 00000fc80c]
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #10 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #11 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000]
[ 0.000000] #13 [0100005000 - 010004d000] BOOTMAP ==> [0100005000 - 010004d000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880100200000-ffff8801071fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000095
[ 0.000000] 0: 0x00000100 -> 0x000bd780
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2086676
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 118 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757688 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000095000 - 0000000000096000
[ 0.000000] PM: Registered nosave memory: 0000000000096000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd780000 - 00000000bd78e000
[ 0.000000] PM: Registered nosave memory: 00000000bd78e000 - 00000000bd7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bd7d0000 - 00000000bd7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bd7e0000 - 00000000bd7ed000
[ 0.000000] PM: Registered nosave memory: 00000000bd7ed000 - 00000000be000000
[ 0.000000] PM: Registered nosave memory: 00000000be000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:40e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001800000 s86016 r8192 d20480 u262144
[ 0.000000] pcpu-alloc: s86016 r8192 d20480 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc:
- 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2054302
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-0.slh.2-aptosid-amd64 root=UUID=8a97a833-ed39-4507-a3e4-cf57c77e06d3 ro vga=791 quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8146668k/9437184k available (3644k kernel code, 1090480k absent, 200036k reserved, 1668k data, 680k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2792.411 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5584.82 BogoMIPS (lpj=2792411)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000019] Security Framework initialized
[ 0.000021] SELinux: Disabled at boot.
[ 0.000618] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002323] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003054] Mount-cache hash table entries: 256
[ 0.003136] Initializing cgroup subsys ns
[ 0.003139] Initializing cgroup subsys cpuacct
[ 0.003142] Initializing cgroup subsys devices
[ 0.003143] Initializing cgroup subsys freezer
[ 0.003144] Initializing cgroup subsys net_cls
[ 0.003146] Initializing cgroup subsys blkio
[ 0.003167] CPU: Physical Processor ID: 0
[ 0.003169] CPU: Processor Core ID: 0
[ 0.003173] mce: CPU supports 9 MCE banks
[ 0.003184] CPU0: Thermal monitoring enabled (TM1)
[ 0.003191] using mwait in idle threads.
[ 0.003192] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.003198] ... version: 3
[ 0.003199] ... bit width: 48
[ 0.003200] ... generic registers: 4
[ 0.003201] ... value mask: 0000ffffffffffff
[ 0.003202] ... max period: 000000007fffffff
[ 0.003203] ... fixed-purpose events: 3
[ 0.003204] ... event mask: 000000070000000f
[ 0.003947] ACPI: Core revision 20100702
[ 0.030607] Setting APIC routing to flat
[ 0.030934] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040917] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.146143] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.790978] Brought up 8 CPUs
[ 0.790981] Total of 8 processors activated (44679.99 BogoMIPS).
[ 0.793985] devtmpfs: initialized
[ 0.794208] regulator: core version 0.5
[ 0.794263] regulator: dummy:
[ 0.794284] NET: Registered protocol family 16
[ 0.794456] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.794458] ACPI: bus type pci registered
[ 0.794541] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.794543] PCI: not using MMCONFIG
[ 0.794544] PCI: Using configuration type 1 for base access
[ 0.795437] bio: create slab <bio-0> at 0
[ 0.796191] ACPI: EC: Look up EC in DSDT
[ 0.796918] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.799899] ACPI: SSDT 00000000bd78e0c0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.800168] ACPI: Dynamic OEM Table Load:
[ 0.800170] ACPI: SSDT (null) 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.800373] ACPI: SSDT 00000000bd790510 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.800594] ACPI: Dynamic OEM Table Load:
[ 0.800596] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.801071] ACPI: Interpreter enabled
[ 0.801073] ACPI: (supports S0 S3 S4 S5)
[ 0.801185] ACPI: Using IOAPIC for interrupt routing
[ 0.801256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.803329] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.843814] ACPI: No dock devices found.
[ 0.843817] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.844040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.844242] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.844245] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.844247] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.844249] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.844251] pci_root PNP0A08:00: host bridge window [mem 0xbe000000-0xdfffffff]
[ 0.844253] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.844339] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.844343] pci 0000:00:03.0: PME# disabled
[ 0.844663] pci 0000:00:16.0: reg 10: [mem 0xf7ffe000-0xf7ffe00f 64bit]
[ 0.844735] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.844740] pci 0000:00:16.0: PME# disabled
[ 0.844791] pci 0000:00:1a.0: reg 10: [mem 0xf7ffc000-0xf7ffc3ff]
[ 0.844863] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.844868] pci 0000:00:1a.0: PME# disabled
[ 0.844903] pci 0000:00:1b.0: reg 10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
[ 0.844959] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.844963] pci 0000:00:1b.0: PME# disabled
[ 0.845033] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.845037] pci 0000:00:1c.0: PME# disabled
[ 0.845109] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.845113] pci 0000:00:1c.1: PME# disabled
[ 0.845187] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.845191] pci 0000:00:1c.5: PME# disabled
[ 0.845237] pci 0000:00:1d.0: reg 10: [mem 0xf7ff6000-0xf7ff63ff]
[ 0.845309] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.845314] pci 0000:00:1d.0: PME# disabled
[ 0.845511] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
[ 0.845519] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
[ 0.845528] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
[ 0.845536] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
[ 0.845542] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
[ 0.845550] pci 0000:00:1f.2: reg 24: [mem 0xf7ff4000-0xf7ff47ff]
[ 0.845583] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.845586] pci 0000:00:1f.2: PME# disabled
[ 0.845615] pci 0000:00:1f.3: reg 10: [mem 0xf7fee000-0xf7fee0ff 64bit]
[ 0.845636] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.845702] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.845712] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.845722] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.845728] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.845734] pci 0000:01:00.0: reg 30: [mem 0xfbde0000-0xfbdfffff pref]
[ 0.845761] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.845764] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.845767] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.845771] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.845810] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.845813] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.845817] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.845823] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.845898] pci 0000:03:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit]
[ 0.845910] pci 0000:03:00.0: reg 18: [io 0xe800-0xe8ff]
[ 0.845985] pci 0000:03:00.0: supports D2
[ 0.845987] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.845992] pci 0000:03:00.0: PME# disabled
[ 0.846012] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.846016] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.846020] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.846026] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846105] pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.846200] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.846205] pci 0000:04:00.0: PME# disabled
[ 0.846236] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.846239] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.846243] pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.846249] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846307] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.846311] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.846315] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.846320] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.846322] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.846324] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.846326] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.846328] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.846331] pci 0000:00:1e.0: bridge window [mem 0xbe000000-0xdfffffff] (subtractive decode)
[ 0.846333] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.846354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.846500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.846573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.846615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[ 0.846672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[ 0.857895] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.857955] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.858017] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.858079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.858140] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.858202] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.858263] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.858325] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.858376] HEST: Table is not found!
[ 0.858453] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.858456] vgaarb: loaded
[ 0.858619] PCI: Using ACPI for IRQ routing
[ 0.858621] PCI: pci_cache_line_size set to 64 bytes
[ 0.858685] reserve RAM buffer: 0000000000095800 - 000000000009ffff
[ 0.858687] reserve RAM buffer: 00000000bd780000 - 00000000bfffffff
[ 0.858787] NetLabel: Initializing
[ 0.858789] NetLabel: domain hash size = 128
[ 0.858790] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.858799] NetLabel: unlabeled traffic allowed by default
[ 0.858805] alloc irq_desc for 40 on node -1
[ 0.858806] alloc kstat_irqs on node -1
[ 0.858811] alloc irq_desc for 41 on node -1
[ 0.858812] alloc kstat_irqs on node -1
[ 0.858816] alloc irq_desc for 42 on node -1
[ 0.858818] alloc kstat_irqs on node -1
[ 0.858822] alloc irq_desc for 43 on node -1
[ 0.858823] alloc kstat_irqs on node -1
[ 0.858826] alloc irq_desc for 44 on node -1
[ 0.858827] alloc kstat_irqs on node -1
[ 0.858830] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.858838] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.858842] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.861794] hpet: hpet2 irq 40 for MSI
[ 0.861865] hpet: hpet3 irq 41 for MSI
[ 0.862901] hpet: hpet4 irq 42 for MSI
[ 0.863896] hpet: hpet5 irq 43 for MSI
[ 0.864920] hpet: hpet6 irq 44 for MSI
[ 0.868906] Switching to clocksource tsc
[ 0.868934] pnp: PnP ACPI init
[ 0.868940] ACPI: bus type pnp registered
[ 0.870896] pnp: PnP ACPI: found 14 devices
[ 0.870898] ACPI: ACPI bus type pnp unregistered
[ 0.870907] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.870910] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.870912] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.870921] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.870927] system 00:06: [io 0x0a00-0x0a0f] has been reserved
[ 0.870930] system 00:06: [io 0x0a10-0x0a1f] has been reserved
[ 0.870932] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.870935] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.870939] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.870941] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.870943] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.870945] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.870947] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.870950] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.870954] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.870959] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.870962] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.870966] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.870971] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.870974] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.870976] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.870978] system 00:0d: [mem 0x00100000-0xbdffffff] could not be reserved
[ 0.870980] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.878469] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbe000000-0xbe1fffff]
[ 0.878472] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878475] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878477] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878479] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.878498] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.878500] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.878502] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.878506] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.878508] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.878512] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.878514] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.878535] pci 0000:00:1c.0: bridge window [mem 0xbe000000-0xbe1fffff]
[ 0.878538] pci 0000:00:1c.0: bridge window [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878543] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.878545] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.878549] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.878569] pci 0000:00:1c.1: bridge window [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878574] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.878576] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.878580] pci 0000:00:1c.5: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.878583] pci 0000:00:1c.5: bridge window [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878605] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.878606] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.878610] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.878613] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.878641] alloc irq_desc for 16 on node -1
[ 0.878642] alloc kstat_irqs on node -1
[ 0.878647] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.878650] pci 0000:00:03.0: setting latency timer to 64
[ 0.878656] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.878676] alloc irq_desc for 17 on node -1
[ 0.878677] alloc kstat_irqs on node -1
[ 0.878680] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.878683] pci 0000:00:1c.0: setting latency timer to 64
[ 0.878689] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.878692] pci 0000:00:1c.1: setting latency timer to 64
[ 0.878715] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.878717] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.878720] pci 0000:00:1c.5: setting latency timer to 64
[ 0.878725] pci 0000:00:1e.0: setting latency timer to 64
[ 0.878728] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.878746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.878748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.878749] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.878751] pci_bus 0000:00: resource 8 [mem 0xbe000000-0xdfffffff]
[ 0.878752] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.878754] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.878755] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbdfffff]
[ 0.878757] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.878759] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.878760] pci_bus 0000:02: resource 1 [mem 0xbe000000-0xbe1fffff]
[ 0.878762] pci_bus 0000:02: resource 2 [mem 0xbe200000-0xbe3fffff 64bit pref]
[ 0.878763] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.878782] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.878783] pci_bus 0000:03: resource 2 [mem 0xbe400000-0xbe5fffff 64bit pref]
[ 0.878785] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.878786] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.878788] pci_bus 0000:04: resource 2 [mem 0xbe600000-0xbe7fffff 64bit pref]
[ 0.878790] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.878791] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.878793] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.878794] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.878796] pci_bus 0000:05: resource 8 [mem 0xbe000000-0xdfffffff]
[ 0.878797] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.878832] NET: Registered protocol family 2
[ 0.879172] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.880672] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.885064] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.885569] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.885571] TCP reno registered
[ 0.885600] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.885710] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.885925] NET: Registered protocol family 1
[ 0.886072] pci 0000:01:00.0: Boot video device
[ 0.886096] PCI: CLS 32 bytes, default 64
[ 0.886163] Unpacking initramfs...
[ 1.274548] Freeing initrd memory: 11556k freed
[ 1.277500] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.277504] Placing 64MB software IO TLB between ffff880001e74000 - ffff880005e74000
[ 1.277505] software IO TLB at phys 0x1e74000 - 0x5e74000
[ 1.279932] audit: initializing netlink socket (disabled)
[ 1.279939] type=2000 audit(1288476253.676:1): initialized
[ 1.280335] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.282600] VFS: Disk quotas dquot_6.5.2
[ 1.282701] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.282841] msgmni has been set to 15934
[ 1.283128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.283131] io scheduler noop registered
[ 1.283132] io scheduler deadline registered
[ 1.283207] io scheduler cfq registered (default)
[ 1.285055] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011800000, using 1536k, total 1536k
[ 1.285057] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 1.285059] vesafb: scrolling: redraw
[ 1.285061] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.374864] Console: switching to colour frame buffer device 128x48
[ 1.461202] fb0: VESA VGA frame buffer device
[ 1.461237] intel_idle: MWAIT substates: 0x1120
[ 1.461238] intel_idle: v0.4 model 0x1E
[ 1.461239] intel_idle: lapic_timer_reliable_states 0x2
[ 1.461594] ERST: Table is not found!
[ 1.461843] Linux agpgart interface v0.103
[ 1.461845] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.462564] Fixed MDIO Bus: probed
[ 1.462743] PNP: No PS/2 controller found. Probing ports directly.
[ 1.463240] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.463244] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.463379] mice: PS/2 mouse device common for all mice
[ 1.464562] cpuidle: using governor ladder
[ 1.466768] cpuidle: using governor menu
[ 1.467053] TCP cubic registered
[ 1.467233] NET: Registered protocol family 10
[ 1.467719] lo: Disabled Privacy Extensions
[ 1.467999] Registering the dns_resolver key type
[ 1.468144] registered taskstats version 1
[ 1.468616] Freeing unused kernel memory: 680k freed
[ 1.520820] udev[661]: starting version 164
[ 1.553914] usbcore: registered new interface driver usbfs
[ 1.553938] usbcore: registered new interface driver hub
[ 1.553968] usbcore: registered new device driver usb
[ 1.560771] SCSI subsystem initialized
[ 1.578995] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.579001] firewire_ohci 0000:03:00.0: setting latency timer to 64
[ 1.582466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.582481] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.582498] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.582501] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.582515] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.582546] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.586507] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.586521] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffc000
[ 1.591098] libata version 3.00 loaded.
[ 1.595197] tg3.c:v3.113 (August 2, 2010)
[ 1.595208] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.595230] tg3 0000:04:00.0: setting latency timer to 64
[ 1.595552] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.595566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.595568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.595569] usb usb1: Product: EHCI Host Controller
[ 1.595571] usb usb1: Manufacturer: Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
[ 1.595572] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.595648] hub 1-0:1.0: USB hub found
[ 1.595651] hub 1-0:1.0: 2 ports detected
[ 1.595721] alloc irq_desc for 23 on node -1
[ 1.595723] alloc kstat_irqs on node -1
[ 1.595727] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.595750] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.595753] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.595758] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.595781] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.599655] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.599665] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ff6000
[ 1.605220] tg3 mdio bus: probed
[ 1.606532] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.606546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.606549] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.606550] usb usb2: Product: EHCI Host Controller
[ 1.606552] usb usb2: Manufacturer: Linux 2.6.36-0.slh.2-aptosid-amd64 ehci_hcd
[ 1.606553] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.606618] hub 2-0:1.0: USB hub found
[ 1.606622] hub 2-0:1.0: 2 ports detected
[ 1.606715] ahci 0000:00:1f.2: version 3.0
[ 1.606724] alloc irq_desc for 19 on node -1
[ 1.606725] alloc kstat_irqs on node -1
[ 1.606729] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.606763] alloc irq_desc for 45 on node -1
[ 1.606764] alloc kstat_irqs on node -1
[ 1.606770] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.606779] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[ 1.606796] ahci: SSS flag set, parallel bus scan disabled
[ 1.612976] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:25:64:ee:0d:d5
[ 1.612995] tg3 0000:04:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
[ 1.612998] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.612999] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.617535] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
[ 1.617539] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 1.617543] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.625558] scsi0 : ahci
[ 1.625614] scsi1 : ahci
[ 1.625656] scsi2 : ahci
[ 1.625773] scsi3 : ahci
[ 1.625816] scsi4 : ahci
[ 1.625860] scsi5 : ahci
[ 1.626011] ata1: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4100 irq 45
[ 1.626013] ata2: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4180 irq 45
[ 1.626016] ata3: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4200 irq 45
[ 1.626018] ata4: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4280 irq 45
[ 1.626019] ata5: DUMMY
[ 1.626021] ata6: SATA max UDMA/133 abar m2048@0xf7ff4000 port 0xf7ff4380 irq 45
[ 1.631584] alloc irq_desc for 46 on node -1
[ 1.631586] alloc kstat_irqs on node -1
[ 1.631596] firewire_ohci 0000:03:00.0: irq 46 for MSI/MSI-X
[ 1.631624] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[ 1.896958] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.929932] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.930995] ata1.00: ATA-8: ST31000528AS, CC45, max UDMA/133
[ 1.930998] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.932216] ata1.00: configured for UDMA/133
[ 1.943005] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC45 PQ: 0 ANSI: 5
[ 2.011102] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.011105] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.011250] hub 1-1:1.0: USB hub found
[ 2.011353] hub 1-1:1.0: 6 ports detected
[ 2.113550] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.131511] firewire_core: created device fw0: GUID 0025648000ee0dd5, S400
[ 2.227823] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.227826] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.227968] hub 2-1:1.0: USB hub found
[ 2.228072] hub 2-1:1.0: 8 ports detected
[ 2.302371] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[ 2.388846] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.388849] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.388850] usb 1-1.1: Product: USB2.0 Hub
[ 2.389197] hub 1-1.1:1.0: USB hub found
[ 2.389574] hub 1-1.1:1.0: 4 ports detected
[ 2.464092] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[ 2.550174] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1003
[ 2.550176] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.550178] usb 1-1.2: Product: External HDD
[ 2.550180] usb 1-1.2: Manufacturer: Western Digital
[ 2.550181] usb 1-1.2: SerialNumber: 57442D574341563530323635353839
[ 2.556058] Initializing USB Mass Storage driver...
[ 2.556149] scsi6 : usb-storage 1-1.2:1.0
[ 2.556231] usbcore: registered new interface driver usb-storage
[ 2.556233] USB Mass Storage support registered.
[ 2.623673] usb 1-1.4: new high speed USB device using ehci_hcd and address 5
[ 2.664520] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.665595] ata2.00: ATA-8: ST31000528AS, CC45, max UDMA/133
[ 2.665597] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.666799] ata2.00: configured for UDMA/133
[ 2.677575] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC45 PQ: 0 ANSI: 5
[ 2.709491] usb 1-1.4: New USB device found, idVendor=1058, idProduct=1001
[ 2.709494] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.709496] usb 1-1.4: Product: External HDD
[ 2.709497] usb 1-1.4: Manufacturer: Western Digital
[ 2.709498] usb 1-1.4: SerialNumber: 574341553432373638353233
[ 2.709681] scsi7 : usb-storage 1-1.4:1.0
[ 2.782372] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[ 2.869090] usb 2-1.2: New USB device found, idVendor=18e3, idProduct=9106
[ 2.869092] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.869094] usb 2-1.2: Product: Mass Storage Device
[ 2.869096] usb 2-1.2: Manufacturer: Generic
[ 2.869097] usb 2-1.2: SerialNumber: 18E391066476
[ 2.869486] scsi8 : usb-storage 2-1.2:1.0
[ 2.932281] usb 1-1.1.3: new high speed USB device using ehci_hcd and address 6
[ 3.007526] usb 1-1.1.3: New USB device found, idVendor=05e3, idProduct=0608
[ 3.007528] usb 1-1.1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.007530] usb 1-1.1.3: Product: USB2.0 Hub
[ 3.007910] hub 1-1.1.3:1.0: USB hub found
[ 3.008254] hub 1-1.1.3:1.0: 4 ports detected
[ 3.073037] usb 1-1.1.4: new low speed USB device using ehci_hcd and address 7
[ 3.153627] usb 1-1.1.4: New USB device found, idVendor=413c, idProduct=2003
[ 3.153630] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.153632] usb 1-1.1.4: Product: Dell USB Keyboard
[ 3.153633] usb 1-1.1.4: Manufacturer: Dell
[ 3.273691] usb 1-1.1.3.2: new full speed USB device using ehci_hcd and address 8
[ 3.349435] usb 1-1.1.3.2: New USB device found, idVendor=067b, idProduct=2303
[ 3.349438] usb 1-1.1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.349439] usb 1-1.1.3.2: Product: USB-Serial Controller
[ 3.349441] usb 1-1.1.3.2: Manufacturer: Prolific Technology Inc.
[ 3.399132] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.400826] ata3.00: ATAPI: Optiarc DVD+/-RW AD-7230S, 102B, max UDMA/100
[ 3.407395] ata3.00: configured for UDMA/100
[ 3.412326] usb 1-1.1.3.3: new low speed USB device using ehci_hcd and address 9
[ 3.433602] scsi 2:0:0:0: CD-ROM Optiarc DVD+-RW AD-7230S 102B PQ: 0 ANSI: 5
[ 3.491440] usb 1-1.1.3.3: New USB device found, idVendor=046d, idProduct=c016
[ 3.491443] usb 1-1.1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.491445] usb 1-1.1.3.3: Product: Optical USB Mouse
[ 3.491446] usb 1-1.1.3.3: Manufacturer: Logitech
[ 3.496461] usbcore: registered new interface driver hiddev
[ 3.499543] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input0
[ 3.499575] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.1.4/input0
[ 3.501364] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/input/input1
[ 3.501395] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-1.1.3.3/input0
[ 3.501404] usbcore: registered new interface driver usbhid
[ 3.501405] usbhid: USB HID core driver
[ 3.554576] scsi 6:0:0:0: Direct-Access WD 10EADS External 1.75 PQ: 0 ANSI: 4
[ 3.708351] scsi 7:0:0:0: Direct-Access WD 10EAVS External 1.05 PQ: 0 ANSI: 4
[ 3.712400] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.712409] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.712476] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.712478] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.712493] sd 0:0:0:0: [sda] Write Protect is off
[ 3.712495] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.712498] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.712538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.713387] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.713421] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.713952] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.713954] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.713956] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.714258] sd 7:0:0:0: [sdd] Write Protect is off
[ 3.714260] sd 7:0:0:0: [sdd] Mode Sense: 21 00 00 00
[ 3.714262] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3.715754] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 3.716294] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.717657] sdc: sdc1
[ 3.718903] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.719483] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.731123] sdb: sdb1
[ 3.731373] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.749062] sda: sda1 sda2
[ 3.749392] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.868147] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.868639] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.869252] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.869755] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
[ 3.873504] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 3.874117] sd 8:0:0:1: [sdf] Attached SCSI removable disk
[ 3.874858] sd 8:0:0:2: [sdg] Attached SCSI removable disk
[ 3.875484] sd 8:0:0:3: [sdh] Attached SCSI removable disk
[ 4.155634] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.156346] ata4.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, DW10, max UDMA/33
[ 4.158129] ata4.00: configured for UDMA/33
[ 4.170731] scsi 3:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-H353B DW10 PQ: 0 ANSI: 5
[ 4.175282] sdd: sdd1
[ 4.176867] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[ 4.177442] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 4.475011] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.530105] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.530107] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.530169] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.535805] sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 4.535923] sr 3:0:0:0: Attached scsi CD-ROM sr1
[ 4.538537] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.538556] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.538577] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.538601] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 4.538626] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 4.538649] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 4.538665] sd 8:0:0:1: Attached scsi generic sg6 type 0
[ 4.538683] sd 8:0:0:2: Attached scsi generic sg7 type 0
[ 4.538725] sd 8:0:0:3: Attached scsi generic sg8 type 0
[ 4.538750] sr 3:0:0:0: Attached scsi generic sg9 type 5
[ 5.112110] device-mapper: uevent: version 1.0.3
[ 5.112190] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 5.286332] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.454634] udev[1030]: starting version 164
[ 6.842916] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.842921] ACPI: Power Button [PWRB]
[ 6.842962] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.842965] ACPI: Power Button [PWRF]
[ 6.864521]
@devil,
das hat nun zweimal nicht geklappt. Ich versuche es mit pastebin: http://pastebin.com/HbaRdusy
Gruß,
Michael
könnt ihr bitte mal folgendes testen mit 2.6.36 und schauen ob das problem dann noch auftaucht:echo N > /sys/module/drm_kms_helper/parameters/poll
falls das problem damit behoben ist, bitte bestätigen.
btw: unterstützen eure grafikkarten hdmi?
greetz
devil
@devil: hab's gesetzt und werde es beobachten. Ich gebe Bescheid. HDMI wird unterstützt von meiner Intel GraKa.
Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
@devil: ich habe kein /sys/module/drm_kms_helper Verzeichnis.
Meine Grafikkarte unterstützt HDMI
hm, das wundert mich jetzt. welche intel grafikkarte hast du denn genau?
greetz
devil
@devil: infobash zeigt: nVidia G92 [GeForce GTS 240]
Gruß,
Michael
@micha_52: na das ist ja eine NVIDIA G92, also nix Intel ;-)
...was dann das gestern von mir gesagte obsolet macht.
greetz
devil
@all: der Workaround von devil funktioniert soweit bei mir
# echo N > /sys/module/drm_kms_helper/parameters/poll
kann das noch jemand bestätigen?
greetz
devil
Das Problem ist mit dem neuen Kernel: 2.6.37-0.slh.1-aptosid-amd64 offenbar behoben.
Hi micha_52,
was heisst bei dir "offenbar behoben"?
Hi bluelupo,
so wie ich es schrieb oder vielleicht etwas ausführlicher: Es existieren zwar immer noch jede Menge kworker Instanzen, die fressen jetzt aber keine CPU Resourcen mehr.