Wie bekomme ich mein Lan-Netzwerk zum aktivieren?
Mit fw-detect habe ich mein WLan zum laufen bekommen, bei der Installation hatte ich kein Netzwerk aktiv, kein Kabel angeschlossen.
Hier die Ausgabe von VGA:deka@deka-sidu:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0fd4] (rev a1)
und hier für die Netzwerkschnittstelle:deka@deka-sidu:~$ lspci -nn | grep Ethernet
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. Device [1969:e091] (rev 13)
Die Ethernet-Karte wird beim booten vom Bios abgefragt, nur nicht gefunden. PXE sucht beim starten danach.
vielleicht fehlt dir ne firmware aus non-free?
Zeig uns doch mal die Ausgabe von inxi -v5
Das kann gut möglich sein, ich möchte ja ein DU machen, leider hat mein Rechner etwas gegen die Tastenkombi: Strg+Alt+F1, sehe dann nur einen schwarzen Bildschirm.
Post:http://forum.siduction.org/index.php?topic=3931&start=0&postdays=0&postorder=asc&highlight= (http://forum.siduction.org/index.php?topic=3931&start=0&postdays=0&postorder=asc&highlight=)
root@deka-sidu:/home/deka# inxi -v5
System: Host: deka-sidu Kernel: 3.9-3.towo-siduction-amd64 x86_64 (64 bit, gcc: 4.7.3)
Desktop: Xfce 4.10.2 (Gtk 2.24.10) Distro: siduction 13.1.0 Firestarter - xfce - (201305202241)
Machine: Mobo: Micro-Star model: MS-16GA version: REV:1.0 serial: BSS-0123456789
Bios: American Megatrends version: E16GAIMS.513 date: 11/08/2012
CPU: Dual core Intel Core i5-3230M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10377
Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz 3: 1200.00 MHz 4: 1200.00 MHz
Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
Card-2: NVIDIA Device 0fd4 bus-ID: 01:00.0
X.org: 1.12.4 driver: vesa tty size: 80x24 Advanced Data: N/A for root
Audio: Card: Intel 7 Series/C210 Series Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.9-3.towo-siduction-amd64
Network: Card-1: Intel Centrino Wireless-N 135 driver: iwlwifi ver: in-tree: bus-ID: 05:00.0
IF: wlan0 state: up mac: 0c:d2:92:46:06:6d
Card-2: Atheros Device e091 port: c000 bus-ID: 03:00.0
IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives: HDD Total Size: 878.2GB (7.7% used) 1: id: /dev/sdb model: TOSHIBA_THNSNH12 size: 128.0GB temp: 43C
2: id: /dev/sda model: WDC_WD7500BPVT size: 750.2GB temp: 31C
Optical: /dev/sr0 model: N/A rev: N/A dev-links: cdrom,cdrw,dvd,dvdrw
Partition: ID: / size: 16G used: 2.8G (20%) fs: ext4 dev: /dev/sdb1
label: N/A uuid: 8163d689-c5d6-4d76-adb7-4dbda9c117f2
ID: /home size: 102G used: 141M (1%) fs: ext4 dev: /dev/sdb2
label: /home uuid: 66aefc3a-400d-430c-9b87-bf601775de41
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 7 min Memory: 318.8/3849.2MB Runlevel: 5 Gcc sys: 4.7.3
Client: Shell (bash 4.2.45) inxi: 1.8.47
jetzt noch bitte den Inhalt von /var/log/Xorg.0.log
wir wollen wissen welche grafikkarte aktiv ist und welcher treiber läuft.
ins init 3 kannst du wechseln durch "init 3" befehl in der konsole oder durch anfügen von "3" in grub
EDIT: ach, moment, laut inxi ausgabe oben ist vesa geladen!
das ist natürlich für den hintern... wieso läuft nicht der intel treiber? ist wohl n problem mit den zwei grafikkarten...
EDIT2: vesa wegen forcevesa und nomodeset... toll...
Deka, erklär jetzt bitte, wieso du das so machst? wieso nicht den intel treiber oder halt den nvidia treiber verwenden für eine deiner grafikkarten?
Hier die gekürzte Xorg.0.log:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.980] X Protocol Version 11, Revision 0
[ 9.980] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 9.980] Current Operating System: Linux deka-sidu 3.9-3.towo-siduction-amd64 #1 SMP PREEMPT Mon May 20 09:02:12 UTC 2013 x86_64
[ 9.980] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9-3.towo-siduction-amd64 root=UUID=8163d689-c5d6-4d76-adb7-4dbda9c117f2 ro nomodeset xforcevesa
[ 9.980] Build Date: 17 April 2013 10:22:47AM
[ 9.980] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau>)
[ 9.980] Current version of pixman: 0.26.0
[ 9.980] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.980] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.980] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 17:23:36 2013
[ 9.986] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.986] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.995] (==) ServerLayout "Xorg Configured"
[ 9.995] (**) |-->Screen "Screen 0" (0)
[ 9.995] (**) | |-->Monitor "Monitor 0"
[ 9.995] (==) No device specified for screen "Screen 0".
Using the first device section listed.
[ 9.995] (**) | |-->Device "Device 0"
[ 9.995] (==) Automatically adding devices
[ 9.995] (==) Automatically enabling devices
[ 10.006] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 10.006] Entry deleted from font path.
[ 10.013] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 10.013] Entry deleted from font path.
[ 10.013] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 10.013] Entry deleted from font path.
[ 10.013] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 10.013] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.013] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.013] (II) Loader magic: 0x7f9451952ae0
[ 10.013] (II) Module ABI versions:
[ 10.013] X.Org ANSI C Emulation: 0.4
[ 10.013] X.Org Video Driver: 12.1
[ 10.013] X.Org XInput driver : 16.0
[ 10.013] X.Org Server Extension : 6.0
[ 10.014] (--) PCI:*(0:0:2:0) 8086:0166:1462:10d7 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 10.014] (--) PCI: (0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 10.014] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.014] (II) LoadModule: "extmod"
[ 10.014] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.014] (II) Module extmod: vendor="X.Org Foundation"
[ 10.014] compiled for 1.12.4, module version = 1.0.0
[ 10.014] Module class: X.Org Server Extension
[ 10.014] ABI class: X.Org Server Extension, version 6.0
[ 10.014] (II) Loading extension SELinux
[ 10.014] (II) Loading extension MIT-SCREEN-SAVER
[ 10.014] (II) Loading extension XFree86-VidModeExtension
[ 10.014] (II) Loading extension XFree86-DGA
[ 10.014] (II) Loading extension DPMS
[ 10.014] (II) Loading extension XVideo
[ 10.014] (II) Loading extension XVideo-MotionCompensation
[ 10.014] (II) Loading extension X-Resource
[ 10.014] (II) LoadModule: "dbe"
[ 10.015] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.015] (II) Module dbe: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.4, module version = 1.0.0
[ 10.015] Module class: X.Org Server Extension
[ 10.015] ABI class: X.Org Server Extension, version 6.0
[ 10.015] (II) Loading extension DOUBLE-BUFFER
[ 10.015] (II) LoadModule: "glx"
[ 10.015] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.015] (II) Module glx: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.4, module version = 1.0.0
[ 10.015] ABI class: X.Org Server Extension, version 6.0
[ 10.015] (==) AIGLX enabled
[ 10.015] (II) Loading extension GLX
[ 10.015] (II) LoadModule: "record"
[ 10.015] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 10.015] (II) Module record: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.4, module version = 1.13.0
[ 10.015] Module class: X.Org Server Extension
[ 10.015] ABI class: X.Org Server Extension, version 6.0
[ 10.015] (II) Loading extension RECORD
[ 10.015] (II) LoadModule: "dri"
[ 10.015] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 10.015] (II) Module dri: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.4, module version = 1.0.0
[ 10.015] ABI class: X.Org Server Extension, version 6.0
[ 10.015] (II) Loading extension XFree86-DRI
[ 10.015] (II) LoadModule: "dri2"
[ 10.015] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 10.015] (II) Module dri2: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.4, module version = 1.2.0
[ 10.015] ABI class: X.Org Server Extension, version 6.0
[ 10.015] (II) Loading extension DRI2
[ 10.015] (II) LoadModule: "vesa"
[ 10.015] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 10.015] (II) Module vesa: vendor="X.Org Foundation"
[ 10.015] compiled for 1.12.1, module version = 2.3.1
[ 10.015] Module class: X.Org Video Driver
[ 10.015] ABI class: X.Org Video Driver, version 12.0
[ 10.015] (II) VESA: driver for VESA chipsets: vesa
[ 10.015] (++) using VT number 7
[ 10.016] (II) Loading sub module "vbe"
[ 10.016] (II) LoadModule: "vbe"
[ 10.019] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 10.019] (II) Module vbe: vendor="X.Org Foundation"
[ 10.019] compiled for 1.12.4, module version = 1.1.0
[ 10.019] ABI class: X.Org Video Driver, version 12.1
[ 10.019] (II) Loading sub module "int10"
[ 10.019] (II) LoadModule: "int10"
[ 10.019] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 10.019] (II) Module int10: vendor="X.Org Foundation"
[ 10.019] compiled for 1.12.4, module version = 1.0.0
[ 10.019] ABI class: X.Org Video Driver, version 12.1
[ 10.019] (II) VESA(0): initializing int10
[ 10.020] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 10.020] (II) VESA(0): VESA BIOS detected
[ 10.020] (II) VESA(0): VESA VBE Version 3.0
[ 10.020] (II) VESA(0): VESA VBE Total Mem: 65472 kB
[ 10.020] (II) VESA(0): VESA VBE OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
[ 10.020] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 10.020] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 10.020] (II) VESA(0): VESA VBE OEM Product: Intel(R) Sandybridge/Ivybridge Graphics Controller
[ 10.020] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 10.027] (**) VESA(0): Depth 16, (--) framebuffer bpp 16
[ 10.027] (==) VESA(0): RGB weight 565
[ 10.027] (==) VESA(0): Default visual is TrueColor
[ 10.027] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.027] (II) Loading sub module "ddc"
[ 10.027] (II) LoadModule: "ddc"
[ 10.027] (II) Module "ddc" already built-in
[ 10.027] (II) VESA(0): VESA VBE DDC supported
[ 10.027] (II) VESA(0): VESA VBE DDC Level 2
[ 10.027] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 10.039] (II) VESA(0): VESA VBE DDC read successfully
[ 10.039] (II) VESA(0): Manufacturer: LGD Model: 259 Serial#: 0
[ 10.039] (II) VESA(0): Year: 2009 Week: 0
[ 10.039] (II) VESA(0): EDID Version: 1.3
[ 10.039] (II) VESA(0): Digital Display Input
[ 10.039] (II) VESA(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 10.039] (II) VESA(0): Gamma: 2.20
[ 10.039] (II) VESA(0): No DPMS capabilities specified
[ 10.039] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10.039] (II) VESA(0): First detailed timing is preferred mode
[ 10.039] (II) VESA(0): redX: 0.617 redY: 0.349 greenX: 0.313 greenY: 0.595
[ 10.039] (II) VESA(0): blueX: 0.151 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 10.039] (II) VESA(0): Manufacturer's mask: 0
[ 10.039] (II) VESA(0): Supported detailed timing:
[ 10.039] (II) VESA(0): clock: 138.5 MHz Image Size: 345 x 194 mm
[ 10.039] (II) VESA(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 10.039] (II) VESA(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 10.039] (II) VESA(0): LG Display
[ 10.039] (II) VESA(0): LP156WF1-TLF3
[ 10.039] (II) VESA(0): EDID (in hex):
[ 10.039] (II) VESA(0): 00ffffffffffff0030e4590200000000
[ 10.039] (II) VESA(0): 00130103802313780a15d59e59509826
[ 10.039] (II) VESA(0): 0e505400000001010101010101010101
[ 10.039] (II) VESA(0): 0101010101011a3680a070381f403020
[ 10.039] (II) VESA(0): 350059c2100000190000000000000000
[ 10.039] (II) VESA(0): 00000000000000000000000000fe004c
[ 10.039] (II) VESA(0): 4720446973706c61790a2020000000fe
[ 10.039] (II) VESA(0): 004c503135365746312d544c4633003c
[ 10.039] (II) VESA(0): EDID vendor "LGD", prod id 601
[ 10.039] (II) VESA(0): Printing DDC gathered Modelines:
[ 10.039] (II) VESA(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 10.039] (II) VESA(0): Searching for matching VESA mode(s):
[ 10.040] Mode: 160 (0x0)
[ 10.040] ModeAttributes: 0x0
[ 10.040] WinAAttributes: 0x0
[ 10.040] WinBAttributes: 0x0
Das mit init in der Konsole werde ich versuchen, die Grub-Einstellung mit der 3 kenne ich nicht.
Vesa musste ich bei der Installation auswählen, sonst hätte die Installation nicht geklappt. Werde heute Abend noch die Xorg.0.log im normalen Kernel-Modus mit "nomodeset" posten.
Der Parameter für die Intel-Graka ist mir nicht bekannt, habe fälschlicher Weise angenommen das mit vesa immer der normale Treiber geladen wird, kein ATI/Nvidia.
nomodeset ist wichtig um überhaupt an dem Notebook arbeiten zu können, sonst hängt sich die Grafik auf.
hört sich wie Optimus an. vor einiger zeit gab es einige threads dazu...
brauchst du überhaupt zwei grafikkarten? irgendwie machen die bisher unter linux eigentlich nur probleme... kannst du nvidia oder intel im bios deaktivieren?
hier was zum informieren:
http://debianforum.de/forum/viewtopic.php?f=13&t=129457
So jetzt der Boot nur mit nomodeset, Xorg.0.log
Release Date: 2012-08-27
[ 11.477] X Protocol Version 11, Revision 0
[ 11.477] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 11.477] Current Operating System: Linux deka-sidu 3.9-3.towo-siduction-amd64 #1 SMP PREEMPT Mon May 20 09:02:12 UTC 2013 x86_64
[ 11.477] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9-3.towo-siduction-amd64 root=UUID=8163d689-c5d6-4d76-adb7-4dbda9c117f2 ro nomodeset
[ 11.477] Build Date: 17 April 2013 10:22:47AM
[ 11.477] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau>)
[ 11.477] Current version of pixman: 0.26.0
[ 11.477] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.477] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 25 17:34:48 2013
[ 11.479] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.479] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.485] (==) ServerLayout "Xorg Configured"
[ 11.485] (**) |-->Screen "Screen 0" (0)
[ 11.485] (**) | |-->Monitor "Monitor 0"
[ 11.485] (==) No device specified for screen "Screen 0".
Using the first device section listed.
[ 11.485] (**) | |-->Device "Device 0"
[ 11.485] (==) Automatically adding devices
[ 11.485] (==) Automatically enabling devices
[ 11.490] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.490] Entry deleted from font path.
[ 11.504] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 11.504] Entry deleted from font path.
[ 11.504] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 11.504] Entry deleted from font path.
[ 11.504] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 11.504] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.504] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.504] (II) Loader magic: 0x7f0af1d61ae0
[ 11.504] (II) Module ABI versions:
[ 11.504] X.Org ANSI C Emulation: 0.4
[ 11.504] X.Org Video Driver: 12.1
[ 11.504] X.Org XInput driver : 16.0
[ 11.504] X.Org Server Extension : 6.0
[ 11.504] (--) PCI:*(0:0:2:0) 8086:0166:1462:10d7 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 11.504] (--) PCI: (0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11.505] (II) Open ACPI successful (/var/run/acpid.socket)
[ 11.505] (II) LoadModule: "extmod"
[ 11.505] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.505] (II) Module extmod: vendor="X.Org Foundation"
[ 11.505] compiled for 1.12.4, module version = 1.0.0
[ 11.505] Module class: X.Org Server Extension
[ 11.505] ABI class: X.Org Server Extension, version 6.0
[ 11.505] (II) Loading extension SELinux
[ 11.505] (II) Loading extension MIT-SCREEN-SAVER
[ 11.505] (II) Loading extension XFree86-VidModeExtension
[ 11.505] (II) Loading extension XFree86-DGA
[ 11.505] (II) Loading extension DPMS
[ 11.505] (II) Loading extension XVideo
[ 11.505] (II) Loading extension XVideo-MotionCompensation
[ 11.505] (II) Loading extension X-Resource
[ 11.505] (II) LoadModule: "dbe"
[ 11.505] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.505] (II) Module dbe: vendor="X.Org Foundation"
[ 11.505] compiled for 1.12.4, module version = 1.0.0
[ 11.505] Module class: X.Org Server Extension
[ 11.505] ABI class: X.Org Server Extension, version 6.0
[ 11.505] (II) Loading extension DOUBLE-BUFFER
[ 11.505] (II) LoadModule: "glx"
[ 11.505] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.505] (II) Module glx: vendor="X.Org Foundation"
[ 11.505] compiled for 1.12.4, module version = 1.0.0
[ 11.505] ABI class: X.Org Server Extension, version 6.0
[ 11.505] (==) AIGLX enabled
[ 11.505] (II) Loading extension GLX
[ 11.505] (II) LoadModule: "record"
[ 11.505] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.505] (II) Module record: vendor="X.Org Foundation"
[ 11.506] compiled for 1.12.4, module version = 1.13.0
[ 11.506] Module class: X.Org Server Extension
[ 11.506] ABI class: X.Org Server Extension, version 6.0
[ 11.506] (II) Loading extension RECORD
[ 11.506] (II) LoadModule: "dri"
[ 11.506] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.506] (II) Module dri: vendor="X.Org Foundation"
[ 11.506] compiled for 1.12.4, module version = 1.0.0
[ 11.506] ABI class: X.Org Server Extension, version 6.0
[ 11.506] (II) Loading extension XFree86-DRI
[ 11.506] (II) LoadModule: "dri2"
[ 11.506] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.506] (II) Module dri2: vendor="X.Org Foundation"
[ 11.506] compiled for 1.12.4, module version = 1.2.0
[ 11.506] ABI class: X.Org Server Extension, version 6.0
[ 11.506] (II) Loading extension DRI2
[ 11.506] (II) LoadModule: "vesa"
[ 11.506] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.506] (II) Module vesa: vendor="X.Org Foundation"
[ 11.506] compiled for 1.12.1, module version = 2.3.1
[ 11.506] Module class: X.Org Video Driver
[ 11.506] ABI class: X.Org Video Driver, version 12.0
[ 11.506] (II) VESA: driver for VESA chipsets: vesa
[ 11.506] (++) using VT number 7
[ 11.507] (II) Loading sub module "vbe"
[ 11.507] (II) LoadModule: "vbe"
[ 11.550] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 11.550] (II) Module vbe: vendor="X.Org Foundation"
[ 11.550] compiled for 1.12.4, module version = 1.1.0
[ 11.550] ABI class: X.Org Video Driver, version 12.1
[ 11.550] (II) Loading sub module "int10"
[ 11.550] (II) LoadModule: "int10"
[ 11.550] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 11.550] (II) Module int10: vendor="X.Org Foundation"
[ 11.550] compiled for 1.12.4, module version = 1.0.0
[ 11.550] ABI class: X.Org Video Driver, version 12.1
[ 11.550] (II) VESA(0): initializing int10
[ 11.551] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 11.551] (II) VESA(0): VESA BIOS detected
[ 11.551] (II) VESA(0): VESA VBE Version 3.0
[ 11.551] (II) VESA(0): VESA VBE Total Mem: 65472 kB
[ 11.551] (II) VESA(0): VESA VBE OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
[ 11.551] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 11.551] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 11.551] (II) VESA(0): VESA VBE OEM Product: Intel(R) Sandybridge/Ivybridge Graphics Controller
[ 11.551] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 11.563] (**) VESA(0): Depth 16, (--) framebuffer bpp 16
[ 11.563] (==) VESA(0): RGB weight 565
[ 11.563] (==) VESA(0): Default visual is TrueColor
[ 11.563] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.563] (II) Loading sub module "ddc"
[ 11.563] (II) LoadModule: "ddc"
[ 11.563] (II) Module "ddc" already built-in
[ 11.564] (II) VESA(0): VESA VBE DDC supported
[ 11.564] (II) VESA(0): VESA VBE DDC Level 2
[ 11.564] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 11.576] (II) VESA(0): VESA VBE DDC read successfully
[ 11.576] (II) VESA(0): Manufacturer: LGD Model: 259 Serial#: 0
[ 11.576] (II) VESA(0): Year: 2009 Week: 0
[ 11.576] (II) VESA(0): EDID Version: 1.3
[ 11.576] (II) VESA(0): Digital Display Input
[ 11.576] (II) VESA(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 11.576] (II) VESA(0): Gamma: 2.20
[ 11.576] (II) VESA(0): No DPMS capabilities specified
[ 11.576] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.576] (II) VESA(0): First detailed timing is preferred mode
[ 11.576] (II) VESA(0): redX: 0.617 redY: 0.349 greenX: 0.313 greenY: 0.595
[ 11.576] (II) VESA(0): blueX: 0.151 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 11.576] (II) VESA(0): Manufacturer's mask: 0
[ 11.576] (II) VESA(0): Supported detailed timing:
[ 11.576] (II) VESA(0): clock: 138.5 MHz Image Size: 345 x 194 mm
[ 11.576] (II) VESA(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 11.576] (II) VESA(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 11.576] (II) VESA(0): LG Display
[ 11.576] (II) VESA(0): LP156WF1-TLF3
[ 11.576] (II) VESA(0): EDID (in hex):
[ 11.576] (II) VESA(0): 00ffffffffffff0030e4590200000000
[ 11.576] (II) VESA(0): 00130103802313780a15d59e59509826
[ 11.576] (II) VESA(0): 0e505400000001010101010101010101
[ 11.576] (II) VESA(0): 0101010101011a3680a070381f403020
[ 11.576] (II) VESA(0): 350059c2100000190000000000000000
[ 11.576] (II) VESA(0): 00000000000000000000000000fe004c
[ 11.576] (II) VESA(0): 4720446973706c61790a2020000000fe
[ 11.576] (II) VESA(0): 004c503135365746312d544c4633003c
[ 11.576] (II) VESA(0): EDID vendor "LGD", prod id 601
[ 11.576] (II) VESA(0): Printing DDC gathered Modelines:
[ 11.576] (II) VESA(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 11.576] (II) VESA(0): Searching for matching VESA mode(s):
[ 11.576] Mode: 160 (0x0)
[ 11.576] ModeAttributes: 0x0
[ 11.576] WinAAttributes: 0x0
[ 11.576] WinBAttributes: 0x0
[ 11.576] WinGranularity: 0
[ 11.576] WinSize: 0
[ 11.590] (II) VESA(0): initializing int10
[ 11.590] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 11.590] (II) VESA(0): VESA BIOS detected
[ 11.590] (II) VESA(0): VESA VBE Version 3.0
[ 11.590] (II) VESA(0): VESA VBE Total Mem: 65472 kB
[ 11.590] (II) VESA(0): VESA VBE OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
[ 11.590] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 11.590] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 11.590] (II) VESA(0): VESA VBE OEM Product: Intel(R) Sandybridge/Ivybridge Graphics Controller
[ 11.590] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 11.590] (II) VESA(0): virtual address = 0x7f0ae8ebc000,
physical address = 0xd0000000, size = 67043328
[ 11.596] (II) VESA(0): Setting up VESA Mode 0x17E (1920x1080)
[ 11.670] (==) VESA(0): Default visual is TrueColor
[ 11.670] (==) VESA(0): Backing store disabled
[ 11.670] (==) VESA(0): DPMS enabled
[ 11.670] (==) RandR enabled
[ 11.670] (II) Found 2 VGA devices: arbiter wrapping enabled
[ 11.670] (II) Initializing built-in extension Generic Event Extension
[ 11.670] (II) Initializing built-in extension SHAPE
[ 11.670] (II) Initializing built-in extension MIT-SHM
[ 11.670] (II) Initializing built-in extension XInputExtension
[ 11.670] (II) Initializing built-in extension XTEST
[ 11.670] (II) Initializing built-in extension BIG-REQUESTS
[ 11.670] (II) Initializing built-in extension SYNC
[ 11.670] (II) Initializing built-in extension XKEYBOARD
[ 11.670] (II) Initializing built-in extension XC-MISC
[ 11.670] (II) Initializing built-in extension SECURITY
[ 11.670] (II) Initializing built-in extension XINERAMA
[ 11.670] (II) Initializing built-in extension XFIXES
[ 11.670] (II) Initializing built-in extension RENDER
[ 11.670] (II) Initializing built-in extension RANDR
[ 11.670] (II) Initializing built-in extension COMPOSITE
[ 11.670] (II) Initializing built-in extension DAMAGE
[ 11.670] (II) SELinux: Disabled on system
[ 11.674] (II) AIGLX: Screen 0 is not DRI2 capable
[ 11.674] (II) AIGLX: Screen 0 is not DRI capable
[ 11.676] (II) AIGLX: Loaded and initialized swrast
[ 11.676] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 11.769] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 11.769] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.769] (II) LoadModule: "evdev"
[ 11.769] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.770] (II) Module evdev: vendor="X.Org Foundation"
[ 11.770] compiled for 1.12.1, module version = 2.7.0
[ 11.770] Module class: X.Org XInput Driver
[ 11.770] ABI class: X.Org XInput driver, version 16.0
[ 11.770] (II) Using input driver 'evdev' for 'Power Button'
[ 11.770] (**) Power Button: always reports core events
[ 11.770] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 11.770] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.770] (--) evdev: Power Button: Found keys
[ 11.770] (II) evdev: Power Button: Configuring as keyboard
[ 11.770] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 11.770] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.770] (**) Option "xkb_rules" "evdev"
[ 11.770] (**) Option "xkb_model" "linux"
[ 11.770] (**) Option "xkb_layout" "de"
[ 11.770] (**) Option "xkb_variant" "nodeadkeys"
[ 11.770] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 11.790] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 11.790] (II) No input driver specified, ignoring this device.
[ 11.790] (II) This device may have been added with another device file.
[ 11.791] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 11.791] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.791] (II) Using input driver 'evdev' for 'Power Button'
[ 11.791] (**) Power Button: always reports core events
[ 11.791] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 11.791] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.791] (--) evdev: Power Button: Found keys
[ 11.791] (II) evdev: Power Button: Configuring as keyboard
[ 11.791] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 11.791] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 11.791] (**) Option "xkb_rules" "evdev"
[ 11.791] (**) Option "xkb_model" "linux"
[ 11.791] (**) Option "xkb_layout" "de"
[ 11.791] (**) Option "xkb_variant" "nodeadkeys"
[ 11.791] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 11.792] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 11.792] (II) No input driver specified, ignoring this device.
[ 11.792] (II) This device may have been added with another device file.
[ 11.792] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 11.792] (II) No input driver specified, ignoring this device.
[ 11.792] (II) This device may have been added with another device file.
[ 11.793] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 11.793] (II) No input driver specified, ignoring this device.
[ 11.793] (II) This device may have been added with another device file.
[ 11.793] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11.793] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.793] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11.793] (**) AT Translated Set 2 keyboard: always reports core events
[ 11.793] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 11.793] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 11.793] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 11.793] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 11.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 11.793] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 11.793] (**) Option "xkb_rules" "evdev"
[ 11.793] (**) Option "xkb_model" "linux"
[ 11.793] (**) Option "xkb_layout" "de"
[ 11.793] (**) Option "xkb_variant" "nodeadkeys"
[ 11.793] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 11.793] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 11.793] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 11.793] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 11.793] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 11.793] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Elantech class"
[ 11.793] (II) LoadModule: "synaptics"
[ 11.793] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 11.793] (II) Module synaptics: vendor="X.Org Foundation"
[ 11.793] compiled for 1.12.4, module version = 1.6.2
[ 11.793] Module class: X.Org XInput Driver
[ 11.793] ABI class: X.Org XInput driver, version 16.0
[ 11.793] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 11.793] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 11.793] (**) Option "Device" "/dev/input/event9"
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2356
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1240
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 11.796] (**) Option "VertEdgeScroll" "true"
[ 11.796] (**) Option "VertTwoFingerScroll" "1"
[ 11.796] (**) Option "HorizTwoFingerScroll" "1"
[ 11.796] (**) Option "LBCornerButton" "2"
[ 11.796] (**) Option "TapButton1" "1"
[ 11.796] (**) Option "TapButton2" "2"
[ 11.796] (**) Option "CircularScrolling" "1"
[ 11.796] (**) Option "CircScrollTrigger" "8"
[ 11.796] (**) Option "CoastingSpeed" "0.13"
[ 11.796] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 11.796] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 11.797] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 11.797] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 9)
[ 11.797] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 11.797] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 11.797] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
[ 11.797] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 11.797] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 11.797] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 11.797] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 11.797] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 11.797] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 11.797] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 11.797] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 11.797] (II) No input driver specified, ignoring this device.
[ 11.797] (II) This device may have been added with another device file.
[ 11.797] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
[ 11.797] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 11.797] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
[ 11.797] (**) MSI WMI hotkeys: always reports core events
[ 11.797] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
[ 11.797] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 11.797] (--) evdev: MSI WMI hotkeys: Found keys
[ 11.797] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 11.797] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 11.797] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 10)
[ 11.797] (**) Option "xkb_rules" "evdev"
[ 11.797] (**) Option "xkb_model" "linux"
[ 11.797] (**) Option "xkb_layout" "de"
[ 11.797] (**) Option "xkb_variant" "nodeadkeys"
[ 11.797] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 12.123] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event10)
[ 12.123] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 12.123] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 12.123] (**) ACPI Virtual Keyboard Device: always reports core events
[ 12.123] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event10"
[ 12.123] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 12.123] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 12.123] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 12.123] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[ 12.123] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 11)
[ 12.123] (**) Option "xkb_rules" "evdev"
[ 12.123] (**) Option "xkb_model" "linux"
[ 12.123] (**) Option "xkb_layout" "de"
[ 12.123] (**) Option "xkb_variant" "nodeadkeys"
[ 12.123] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
Hier die /etc/default/grub
If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT=3
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
Wie kriege ich das mit der 3 in Grub hin, das ich in init 3 komme und ein DU machen kann. Dann werden die fehlenden Treiber bestimmt geladen, oder?
Mit init 3 in der Konsole wird nur wieder der Bildschirm schwarz, keine weiteren Aktivitäten. Neustarten, Herunterfahren hat das gleiche Symptom.
Ideen wie ich ein DU machen kann?
Mit dem Eintrag der 3 in /etc/inittab bei ID:5, die 5 durch die 3 ersetzt.
Werde erst einmal alles installieren, sind ca. 800MB.
Das wird wohl die Nacht über dauern ;-)
So das DU ist durch, hier die Xorg.0.log
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 9.031] X Protocol Version 11, Revision 0
[ 9.031] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian
[ 9.031] Current Operating System: Linux deka-sidu 3.11-6.towo-siduction-amd64 #1 SMP PREEMPT Sat Oct 19 19:13:21 UTC 2013 x86_64
[ 9.031] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-6.towo-siduction-amd64 root=UUID=8163d689-c5d6-4d76-adb7-4dbda9c117f2 ro nomodeset
[ 9.031] Build Date: 05 October 2013 02:04:26PM
[ 9.031] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau>)
[ 9.031] Current version of pixman: 0.30.2
[ 9.031] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.031] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.031] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 25 19:30:40 2013
[ 9.037] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.037] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.044] (==) ServerLayout "Xorg Configured"
[ 9.044] (**) |-->Screen "Screen 0" (0)
[ 9.044] (**) | |-->Monitor "Monitor 0"
[ 9.044] (==) No device specified for screen "Screen 0".
Using the first device section listed.
[ 9.044] (**) | |-->Device "Device 0"
[ 9.044] (==) Automatically adding devices
[ 9.044] (==) Automatically enabling devices
[ 9.044] (==) Automatically adding GPU devices
[ 9.095] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.095] Entry deleted from font path.
[ 9.101] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 9.101] Entry deleted from font path.
[ 9.101] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 9.101] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.101] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.101] (II) Loader magic: 0x7f4d17cb3d00
[ 9.101] (II) Module ABI versions:
[ 9.101] X.Org ANSI C Emulation: 0.4
[ 9.101] X.Org Video Driver: 14.1
[ 9.101] X.Org XInput driver : 19.1
[ 9.101] X.Org Server Extension : 7.0
[ 9.102] (--) PCI:*(0:0:2:0) 8086:0166:1462:10d7 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 9.102] (--) PCI: (0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 9.102] (II) Open ACPI successful (/var/run/acpid.socket)
[ 9.102] Initializing built-in extension Generic Event Extension
[ 9.102] Initializing built-in extension SHAPE
[ 9.102] Initializing built-in extension MIT-SHM
[ 9.102] Initializing built-in extension XInputExtension
[ 9.102] Initializing built-in extension XTEST
[ 9.102] Initializing built-in extension BIG-REQUESTS
[ 9.102] Initializing built-in extension SYNC
[ 9.102] Initializing built-in extension XKEYBOARD
[ 9.102] Initializing built-in extension XC-MISC
[ 9.102] Initializing built-in extension SECURITY
[ 9.102] Initializing built-in extension XINERAMA
[ 9.102] Initializing built-in extension XFIXES
[ 9.102] Initializing built-in extension RENDER
[ 9.102] Initializing built-in extension RANDR
[ 9.102] Initializing built-in extension COMPOSITE
[ 9.102] Initializing built-in extension DAMAGE
[ 9.102] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.102] Initializing built-in extension DOUBLE-BUFFER
[ 9.102] Initializing built-in extension RECORD
[ 9.102] Initializing built-in extension DPMS
[ 9.102] Initializing built-in extension X-Resource
[ 9.102] Initializing built-in extension XVideo
[ 9.102] Initializing built-in extension XVideo-MotionCompensation
[ 9.102] Initializing built-in extension SELinux
[ 9.102] Initializing built-in extension XFree86-VidModeExtension
[ 9.102] Initializing built-in extension XFree86-DGA
[ 9.102] Initializing built-in extension XFree86-DRI
[ 9.102] Initializing built-in extension DRI2
[ 9.102] (II) LoadModule: "glx"
[ 9.102] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.104] (II) Module glx: vendor="X.Org Foundation"
[ 9.104] compiled for 1.14.3, module version = 1.0.0
[ 9.104] ABI class: X.Org Server Extension, version 7.0
[ 9.104] (==) AIGLX enabled
[ 9.104] Loading extension GLX
[ 9.104] (II) LoadModule: "vesa"
[ 9.104] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.104] (II) Module vesa: vendor="X.Org Foundation"
[ 9.104] compiled for 1.14.3, module version = 2.3.3
[ 9.104] Module class: X.Org Video Driver
[ 9.104] ABI class: X.Org Video Driver, version 14.1
[ 9.104] (II) VESA: driver for VESA chipsets: vesa
[ 9.104] (++) using VT number 7
[ 9.105] (II) Loading sub module "vbe"
[ 9.105] (II) LoadModule: "vbe"
[ 9.106] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 9.106] (II) Module vbe: vendor="X.Org Foundation"
[ 9.106] compiled for 1.14.3, module version = 1.1.0
[ 9.106] ABI class: X.Org Video Driver, version 14.1
[ 9.106] (II) Loading sub module "int10"
[ 9.106] (II) LoadModule: "int10"
[ 9.106] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 9.106] (II) Module int10: vendor="X.Org Foundation"
[ 9.106] compiled for 1.14.3, module version = 1.0.0
[ 9.107] ABI class: X.Org Video Driver, version 14.1
[ 9.107] (II) VESA(0): initializing int10
[ 9.107] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 9.108] (II) VESA(0): VESA BIOS detected
[ 9.108] (II) VESA(0): VESA VBE Version 3.0
[ 9.108] (II) VESA(0): VESA VBE Total Mem: 65472 kB
[ 9.108] (II) VESA(0): VESA VBE OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
[ 9.108] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 9.108] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 9.108] (II) VESA(0): VESA VBE OEM Product: Intel(R) Sandybridge/Ivybridge Graphics Controller
[ 9.108] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 9.113] (**) VESA(0): Depth 16, (--) framebuffer bpp 16
[ 9.113] (==) VESA(0): RGB weight 565
[ 9.113] (==) VESA(0): Default visual is TrueColor
[ 9.113] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 9.113] (II) Loading sub module "ddc"
[ 9.113] (II) LoadModule: "ddc"
[ 9.113] (II) Module "ddc" already built-in
[ 9.114] (II) VESA(0): VESA VBE DDC supported
[ 9.114] (II) VESA(0): VESA VBE DDC Level 2
[ 9.114] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 9.126] (II) VESA(0): VESA VBE DDC read successfully
[ 9.126] (II) VESA(0): Manufacturer: LGD Model: 259 Serial#: 0
[ 9.126] (II) VESA(0): Year: 2009 Week: 0
[ 9.126] (II) VESA(0): EDID Version: 1.3
[ 9.126] (II) VESA(0): Digital Display Input
[ 9.126] (II) VESA(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 9.126] (II) VESA(0): Gamma: 2.20
[ 9.126] (II) VESA(0): No DPMS capabilities specified
[ 9.126] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.126] (II) VESA(0): First detailed timing is preferred mode
[ 9.126] (II) VESA(0): redX: 0.617 redY: 0.349 greenX: 0.313 greenY: 0.595
[ 9.126] (II) VESA(0): blueX: 0.151 blueY: 0.056 whiteX: 0.313 whiteY: 0.329
[ 9.126] (II) VESA(0): Manufacturer's mask: 0
[ 9.126] (II) VESA(0): Supported detailed timing:
[ 9.126] (II) VESA(0): clock: 138.5 MHz Image Size: 345 x 194 mm
[ 9.126] (II) VESA(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 9.126] (II) VESA(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 9.126] (II) VESA(0): LG Display
[ 9.126] (II) VESA(0): LP156WF1-TLF3
[ 9.126] (II) VESA(0): EDID (in hex):
[ 9.126] (II) VESA(0): 00ffffffffffff0030e4590200000000
[ 9.126] (II) VESA(0): 00130103802313780a15d59e59509826
[ 9.126] (II) VESA(0): 0e505400000001010101010101010101
[ 9.126] (II) VESA(0): 0101010101011a3680a070381f403020
[ 9.126] (II) VESA(0): 350059c2100000190000000000000000
[ 9.126] (II) VESA(0): 00000000000000000000000000fe004c
[ 9.126] (II) VESA(0): 4720446973706c61790a2020000000fe
[ 9.126] (II) VESA(0): 004c503135365746312d544c4633003c
[ 9.126] (II) VESA(0): EDID vendor "LGD", prod id 601
[ 9.126] (II) VESA(0): Printing DDC gathered Modelines:
[ 9.126] (II) VESA(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 9.126] (II) VESA(0): Searching for matching VESA mode(s):
[ 9.126] Mode: 160 (0x0)
Und hier der zweite Teil
[ 9.142] (II) VESA(0): Total Memory: 1023 64KB banks (65472kB)
[ 9.142] (II) VESA(0): Monitor 0: Using hsync range of 28.00-96.00 kHz
[ 9.142] (II) VESA(0): Monitor 0: Using vrefresh range of 50.00-75.00 Hz
[ 9.142] (II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
[ 9.142] (II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
[ 9.142] (II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
[ 9.143] (II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
[ 9.143] (--) VESA(0): Virtual size is 1920x1080 (pitch 1920)
[ 9.143] (**) VESA(0): Built-in mode "1920x1080"
[ 9.143] (**) VESA(0): Display dimensions: (350, 190) mm
[ 9.143] (**) VESA(0): DPI set to (139, 144)
[ 9.143] (**) VESA(0): Using "Shadow Framebuffer"
[ 9.143] (II) Loading sub module "shadow"
[ 9.143] (II) LoadModule: "shadow"
[ 9.143] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 9.143] (II) Module shadow: vendor="X.Org Foundation"
[ 9.143] compiled for 1.14.3, module version = 1.1.0
[ 9.143] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.143] (II) Loading sub module "fb"
[ 9.143] (II) LoadModule: "fb"
[ 9.143] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.153] (II) Module fb: vendor="X.Org Foundation"
[ 9.153] compiled for 1.14.3, module version = 1.0.0
[ 9.153] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.153] (II) Loading sub module "int10"
[ 9.153] (II) LoadModule: "int10"
[ 9.153] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 9.153] (II) Module int10: vendor="X.Org Foundation"
[ 9.153] compiled for 1.14.3, module version = 1.0.0
[ 9.153] ABI class: X.Org Video Driver, version 14.1
[ 9.153] (II) VESA(0): initializing int10
[ 9.153] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 9.153] (II) VESA(0): VESA BIOS detected
[ 9.153] (II) VESA(0): VESA VBE Version 3.0
[ 9.153] (II) VESA(0): VESA VBE Total Mem: 65472 kB
[ 9.153] (II) VESA(0): VESA VBE OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
[ 9.153] (II) VESA(0): VESA VBE OEM Software Rev: 1.0
[ 9.153] (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
[ 9.153] (II) VESA(0): VESA VBE OEM Product: Intel(R) Sandybridge/Ivybridge Graphics Controller
[ 9.153] (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
[ 9.154] (II) VESA(0): virtual address = 0x7f4d0f7e1000,
physical address = 0xd0000000, size = 67043328
[ 9.160] (II) VESA(0): Setting up VESA Mode 0x17E (1920x1080)
[ 9.233] (==) VESA(0): Default visual is TrueColor
[ 9.233] (==) VESA(0): Backing store disabled
[ 9.233] (==) VESA(0): DPMS enabled
[ 9.233] (==) RandR enabled
[ 9.233] (II) Found 2 VGA devices: arbiter wrapping enabled
[ 9.236] (II) SELinux: Disabled on system
[ 9.237] (II) AIGLX: Screen 0 is not DRI2 capable
[ 9.237] (II) AIGLX: Screen 0 is not DRI capable
[ 9.312] (II) AIGLX: Loaded and initialized swrast
[ 9.312] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.379] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.379] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.379] (II) LoadModule: "evdev"
[ 9.379] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9.379] (II) Module evdev: vendor="X.Org Foundation"
[ 9.379] compiled for 1.14.3, module version = 2.8.2
[ 9.379] Module class: X.Org XInput Driver
[ 9.379] ABI class: X.Org XInput driver, version 19.1
[ 9.379] (II) Using input driver 'evdev' for 'Power Button'
[ 9.379] (**) Power Button: always reports core events
[ 9.379] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 9.379] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 9.379] (--) evdev: Power Button: Found keys
[ 9.379] (II) evdev: Power Button: Configuring as keyboard
[ 9.379] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 9.379] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.379] (**) Option "xkb_rules" "evdev"
[ 9.379] (**) Option "xkb_model" "pc102"
[ 9.379] (**) Option "xkb_layout" "de"
[ 9.379] (**) Option "xkb_variant" "nodeadkeys"
[ 9.379] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 9.393] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 9.393] (II) No input driver specified, ignoring this device.
[ 9.393] (II) This device may have been added with another device file.
[ 9.393] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 9.393] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.393] (II) Using input driver 'evdev' for 'Power Button'
[ 9.393] (**) Power Button: always reports core events
[ 9.393] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 9.393] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 9.393] (--) evdev: Power Button: Found keys
[ 9.393] (II) evdev: Power Button: Configuring as keyboard
[ 9.393] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 9.393] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 9.393] (**) Option "xkb_rules" "evdev"
[ 9.393] (**) Option "xkb_model" "pc102"
[ 9.393] (**) Option "xkb_layout" "de"
[ 9.393] (**) Option "xkb_variant" "nodeadkeys"
[ 9.393] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 9.394] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 9.394] (II) No input driver specified, ignoring this device.
[ 9.394] (II) This device may have been added with another device file.
[ 9.394] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 9.394] (II) No input driver specified, ignoring this device.
[ 9.394] (II) This device may have been added with another device file.
[ 9.394] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 9.394] (II) No input driver specified, ignoring this device.
[ 9.394] (II) This device may have been added with another device file.
[ 9.394] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 9.394] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.394] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 9.394] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.394] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 9.394] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 9.394] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 9.394] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 9.394] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 9.394] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 9.394] (**) Option "xkb_rules" "evdev"
[ 9.394] (**) Option "xkb_model" "pc102"
[ 9.394] (**) Option "xkb_layout" "de"
[ 9.394] (**) Option "xkb_variant" "nodeadkeys"
[ 9.394] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 9.394] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 9.394] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 9.394] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 9.394] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 9.395] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Elantech class"
[ 9.395] (II) LoadModule: "synaptics"
[ 9.395] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 9.395] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.395] compiled for 1.14.3, module version = 1.7.1
[ 9.395] Module class: X.Org XInput Driver
[ 9.395] ABI class: X.Org XInput driver, version 19.1
[ 9.395] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 9.395] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 9.395] (**) Option "Device" "/dev/input/event9"
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2356 (res 0)
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1240 (res 0)
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 9.425] (**) Option "VertEdgeScroll" "true"
[ 9.425] (**) Option "VertTwoFingerScroll" "1"
[ 9.425] (**) Option "HorizTwoFingerScroll" "1"
[ 9.425] (**) Option "LBCornerButton" "2"
[ 9.425] (**) Option "TapButton1" "1"
[ 9.425] (**) Option "TapButton2" "2"
[ 9.425] (**) Option "CircularScrolling" "1"
[ 9.425] (**) Option "CircScrollTrigger" "8"
[ 9.425] (**) Option "CoastingSpeed" "0.13"
[ 9.425] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 9.425] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 9.441] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 9.441] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 9)
[ 9.441] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 9.441] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 9.441] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[ 9.441] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 9.441] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 9.441] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 9.441] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 9.441] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 9.441] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 9.441] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.442] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 9.442] (II) No input driver specified, ignoring this device.
[ 9.442] (II) This device may have been added with another device file.
[ 9.442] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event8)
[ 9.442] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 9.442] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
[ 9.442] (**) MSI WMI hotkeys: always reports core events
[ 9.442] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event8"
[ 9.442] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 9.442] (--) evdev: MSI WMI hotkeys: Found keys
[ 9.442] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 9.442] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 9.442] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 10)
[ 9.442] (**) Option "xkb_rules" "evdev"
[ 9.442] (**) Option "xkb_model" "pc102"
[ 9.442] (**) Option "xkb_layout" "de"
[ 9.442] (**) Option "xkb_variant" "nodeadkeys"
[ 9.442] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
[ 9.690] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event10)
[ 9.690] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 9.690] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 9.690] (**) ACPI Virtual Keyboard Device: always reports core events
[ 9.690] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event10"
[ 9.690] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 9.690] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 9.690] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 9.690] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[ 9.690] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 11)
[ 9.690] (**) Option "xkb_rules" "evdev"
[ 9.690] (**) Option "xkb_model" "pc102"
[ 9.690] (**) Option "xkb_layout" "de"
[ 9.690] (**) Option "xkb_variant" "nodeadkeys"
[ 9.690] (**) Option "xkb_options" "lv3:ralt_switch,compose:menu"
Wie bekomme ich jetzt anstelle von vesa den Intel-Treiber zum laufen?
einrichten? und wenn Du dazu am Lesen bist, dann sieh Dir doch bitte auch noch Veröffentlichungen zum Thema: Wie nutze ich einen paste-service? an.Wir bieten so was auch mit siduction-paste $foo - ist besser als das Forum mit so ellenlangen Sachen vollzustellen.
in den logs oben wird jedes mal nomodeset als parameter übergeben, und die xorg.conf verwendet (was steht da überhaupt drin?). damit verbaust du dir imho die lösung.
ich würde empfehlen nach einer möglichkeit zu suchen die nvidia oder intel grafikkarte zu deaktivieren, um nur eine zu verwenden und dafür passende treiber zu nutzen. wie schon erwähnt, ich glaube das stichwort ist "nvidia optimus"
booten ins init 3, indem man in grub die bootzeile editiert: eine "3" anfügen
Habe nach mehrmaligen Fehlversuchen es hin bekommen mit dem Paste-Service.
Terminal musste ich beenden und nur neustarten dann klappte das auf einmal.
Hier meine neue Xorg.0.log nachdem ich versucht hatte diese auf "intel" umzustellen, was natürlich nicht klappte.
Um wieder die ausgangssituation herzustellen habe ich nur die xorg.conf von der Installation in xorg.conf.bak geändert und nach dem Neustart habe ich jetzt den Intel-Treiber am laufen, siehe hier:
http://paste.siduction.org/20131026100838
Ob das jetzt mit dem Abmelden, Neustarten, Herunterfahren und Strg+Alt+F1 klappt muss ich noch testen. Mache erst einmal ein Image.
Du hast immer noch "nomodeset" in der kernel command line, da kann das nicht klappen.
Nimms mal waehrend des bootens raus oder entferns in der /etc/default/grub und probier dann nochmal zu booten.
Xorg.conf bzw ...xorg.conf.d/...conf darf auch keine aktiv sein.
So wie ich das lese haette dein System zwar gerne den intel-Treiber genommen, kann aber nicht wegen "nomodeset".
Gruss
Ayla
Hallo ayla,
Danke für den Tipp. Hier jetzt "OHNE" zusätzliche Einträge in Grub:
http://paste.siduction.org/20131026114515
Das Problem mit der Ethernetkarte besteht weiterhin!
Wie kann ich diese Karte aktivieren?
Die gepostete Dateien sind alle noch mit vesa, ich habe leider in dem durcheinander ein update-grub vergessen.
Auch hat der Eintrag von
Hab jetzt mal folgenden Befehl in die /etc/rc.local eingetragen:
Code: echo 1 > /sys/bus/pci/devices/0000:01:00.0/remove
und zudem folgendes in /etc/modprobe.d/blacklist.conf eingetragen:
Code: blacklist nouveau
hwinfo:root@deka-sidu:/home/deka# hwinfo | grep Driver
process 17869: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
<6>[ 3.542903] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Driver Info #0:
Driver Status: thermal,fan are active
Driver Activation Cmd: "modprobe thermal; modprobe fan"
Driver: "pcieport"
Driver Info #0:
Driver Status: i915 is active
Driver Activation Cmd: "modprobe i915"
Driver: "xhci_hcd"
Driver Modules: "xhci_hcd"
Driver Info #0:
Driver Status: xhci_hcd is active
Driver Activation Cmd: "modprobe xhci_hcd"
Driver: "mei_me"
Driver Modules: "mei_me"
Driver Info #0:
Driver Status: mei_me is active
Driver Activation Cmd: "modprobe mei_me"
Driver: "ehci-pci"
Driver Modules: "ehci_pci"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Driver Info #1:
Driver Status: ehci_pci is active
Driver Activation Cmd: "modprobe ehci_pci"
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Driver: "pcieport"
Driver: "pcieport"
Driver: "pcieport"
Driver: "pcieport"
Driver: "ehci-pci"
Driver Modules: "ehci_pci"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Driver Info #1:
Driver Status: ehci_pci is active
Driver Activation Cmd: "modprobe ehci_pci"
Driver: "lpc_ich"
Driver Modules: "lpc_ich"
Driver Info #0:
Driver Status: lpc_ich is active
Driver Activation Cmd: "modprobe lpc_ich"
Driver: "ahci"
Driver Modules: "ahci"
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: "modprobe ahci"
Driver Info #0:
Driver Status: i2c_i801 is active
Driver Activation Cmd: "modprobe i2c_i801"
Driver: "alx"
Driver Modules: "alx"
Driver Info #0:
Driver Status: alx is active
Driver Activation Cmd: "modprobe alx"
Driver: "rtsx_pci"
Driver Modules: "rtsx_pci"
Driver Info #0:
Driver Status: rtsx_pci is active
Driver Activation Cmd: "modprobe rtsx_pci"
Driver: "sdhci-pci"
Driver Modules: "sdhci_pci"
Driver Info #0:
Driver Status: sdhci_pci is active
Driver Activation Cmd: "modprobe sdhci_pci"
Driver: "iwlwifi"
Driver Modules: "iwlwifi"
Driver Info #0:
Driver Status: iwlwifi is active
Driver Activation Cmd: "modprobe iwlwifi"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Driver: "ahci", "sr"
Driver Modules: "ahci"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver: "btusb"
Driver Modules: "btusb"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver: "hub"
Driver Modules: "usbcore"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Driver Info #0:
Driver Info #0:
Driver: "iwlwifi"
Driver Modules: "iwlwifi"
Driver: "alx"
Driver Modules: "alx"
Da die Intel-Graka nur vor der Anmeldung funktioniert und nach der Anmeldung ein Grafikproblem auftritt das die Benutzung des Notebooks unmöglich macht habe ich einen Widerruf beantragt und das Gerät zurück geschickt.
Das Problem muss hier an dem UEFI-Modus "Legacy" und der nicht abwählbaren Grafikkarte im BIOS liegen. Habe zwar die Anleitung befolgt und die Nvidia-Graka-Treiber deaktiviert, was keine Besserung brachte.
Werde mir also ein Notebook aus einem Linux-Shop kaufen.
Danken möchte ich hier noch allen sagen, die es mit mir so lange ausgehalten haben.