Hallo Forum,
nach langer Zeit in den ich meine Probleme bis jetzt selber lösen konnte, hab ich mal eins, wo ich nicht mehr weiter weiß.
Bei meinem Oldtimer
hessi@Linux2:~$ inxi -v3
System: Host: Linux2 Kernel: 3.11-6.towo-siduction-686 i686 (32 bit, gcc: 4.8.2)
Desktop: KDE 4.11.3 (Qt 4.8.6) Distro: sidux-20070108-d:4
Machine: Mobo: N/A model: ConRoe945G-DVI Bios: American Megatrends version: P1.10 date: 08/23/2006
CPU: Dual core Intel Pentium D CPU (-MCP-) cache: 2048 KB flags: (lm pae sse sse2 sse3 vmx) bmips: 12765.2
Clock Speeds: 1: 3191.290 MHz 2: 3191.290 MHz
Graphics: Card: NVIDIA NV44 [GeForce 6200 TurboCache] bus-ID: 03:00.0
X.Org: 1.14.3 driver: nvidia Resolution: 1920x1080@59.9hz
GLX Renderer: GeForce 6200 TurboCache/PCIe/SSE2 GLX Version: 2.1.2 NVIDIA 304.116 Direct Rendering: Yes
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: e800 bus-ID: 01:00.0
IF: eth1 state: up speed: 100 Mbps duplex: full mac: 00:13:8f:cf:c3:2f
Drives: HDD Total Size: 200.0GB (62.2% used) 1: model: WDC_WD2000JS
Info: Processes: 148 Uptime: 8 min Memory: 962.7/2025.2MB Runlevel: 5 Gcc sys: 4.8.2
Client: Shell (bash 4.2.45) inxi: 1.9.16
läuft der "nvidia-legacy-304xx"-Treiber mit den Kernel 3.12-0 und 3.12-1 von Thorsten nicht mehr!
in der Xorg.log sind folgende Fehler aufgeführt:
[ 504.670] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 504.670] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 504.670] (==) NVIDIA(0): RGB weight 888
[ 504.670] (==) NVIDIA(0): Default visual is TrueColor
[ 504.671] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 504.671] (**) NVIDIA(0): Enabling 2D acceleration
[ 504.676] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:3:0:0. Please
[ 504.676] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 504.676] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 504.676] (EE) NVIDIA(0): README for additional information.
[ 504.676] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 504.676] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 504.676] (II) UnloadModule: "nvidia"
[ 504.676] (II) UnloadSubModule: "wfb"
[ 504.676] (II) UnloadSubModule: "fb"
[ 504.676] (EE) Screen(s) found, but none have a usable configuration.
[ 504.676] (EE)
Fatal server error:
[ 504.676] (EE) no screens found(EE)
[ 504.676] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 504.676] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 504.676] (EE)
[ 504.742] (EE) Server terminated with error (1). Closing log file.
Mit den Kernel 3.11-6 läuft es noch.
Hat einer eine Idee, wie ich das bei neuere Kernel zum laufen bringe? Falls Ihr noch Infos braucht, ruhig sagen.
Danke schon mal für Eure hilfreichen Antworten.
Stefan
aktuelle header hast Du aber im System, die Module bauen auch?
Weil: ich bin mit meiner topaktuellen 7300 auch auf den Blob angewiesen - bisher keine Probleme
Hallo,
natürlich installiere ich immer mit linux-image auch die dazugehörige linux-headers. Bei den Bauen mit "dkms" gibt es keine Meldungen, die auf ein Fehler schließen würden. Bis zum Kernel 3.11 funktionierte das auch einwandfrei. Erst mit den 3.12er geht es nicht mehr.
Stefan
Hallo,
hier noch:
hessi@Linux2:~$ lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
03:00.0 VGA compatible controller: NVIDIA Corporation NV44 [GeForce 6200 TurboCache] (rev a1)
04:01.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
04:01.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
04:01.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
04:01.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Vielleicht auch interessant.
Stefan
Zeig mal bitte die Ausgabe von
dpkg -l | grep -i nvidia
hessi@Linux2:~$ dpkg -l | grep -i nvidia
ii glx-alternative-nvidia 0.4.1 i386 allows the selection of NVIDIA as GLX provider
ii libgl1-nvidia-legacy-304xx-glx:i386 304.116-1.1 i386 NVIDIA binary OpenGL libraries (304xx legacy version)
ii libgl1-nvidia-legacy-304xx-glx-i386 304.116-1.1 i386 NVIDIA binary OpenGL 32-bit libraries (304xx legacy version)
ii libxvmcnvidia1:i386 304.116-1.1 i386 NVIDIA binary XvMC library (304xx legacy version)
ii nvidia-installer-cleanup 20131102+1 i386 cleanup after driver installation with the nvidia-installer
ii nvidia-kernel-common 20131102+1 i386 NVIDIA binary kernel module support files
ii nvidia-legacy-304xx-alternative 304.116-1.1 i386 allows the selection of NVIDIA as GLX provider
ii nvidia-legacy-304xx-driver 304.116-1.1 i386 NVIDIA metapackage (304xx legacy version)
ii nvidia-legacy-304xx-kernel-dkms 304.116-1.1 i386 NVIDIA binary kernel module DKMS source (304xx legacy version)
ii nvidia-legacy-304xx-kernel-source 304.116-1.1 i386 NVIDIA binary kernel module source (304xx legacy version)
ii nvidia-settings-legacy-304xx 304.116-1 i386 tool for configuring the NVIDIA graphics driver (304xx legacy version)
ii nvidia-support 20131102+1 i386 NVIDIA binary graphics driver support files
ii xserver-xorg-video-nvidia-legacy-304xx 304.116-1.1 i386 NVIDIA binary Xorg driver (304xx legacy version)
Stefan
hmm - sieht irgendwie nach einem 32 Bitter aus - auf amd64/multiarch läuft der Treiber perfekt. Ich werf mal nen i386 auf mein System.
Edit: DerUrsprungspost hätte diese bahnbrechende Erkenntnis auch ermöglicht - ich lern irgendwann mal lesen.
dkms status
sagt was?
root@Linux2:/home/hessi# dkms status
nvidia-legacy-304xx, 304.116, 3.11-6.towo-siduction-686, i686: installed
nvidia-legacy-304xx, 304.116, 3.12-1.towo-siduction-686, i686: installed
Stefan
Nun müßtest Du doch den 3.12er booten und dann verraten, was dmesg sagt, nachdem du ein
modprobe nvidia
abgesetzt hast.
Hallo,
modprobe nvidia
ging ohne Rückmeldung.
die Ausgabe von dmesg (siehe Anhang)
Stefan
Hallo,
bei den 3.11-6er Kernel kommt folgendes
[ 29.038183] NVRM: Your system is not currently configured to drive a VGA console
[ 29.038190] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 29.038194] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 29.038197] NVRM: drivers including, but not limited to, vesafb, may result in
[ 29.038201] NVRM: corruption and stability problems, and is not supported.
vielleicht hilft es.
Stefan
Hallo,
nach weiteren Recherchen konnte ich mit den Kernelparameter:
vmalloc=256M
den xserver erfolgreich starten!
siehe:
hessi@Linux2:~$ inxi -v3
System: Host: Linux2 Kernel: 3.12-1.towo-siduction-686 i686 (32 bit, gcc: 4.8.2)
Desktop: KDE 4.11.3 (Qt 4.8.6) Distro: sidux-20070108-d:4
Machine: Mobo: N/A model: ConRoe945G-DVI Bios: American Megatrends version: P1.10 date: 08/23/2006
CPU: Dual core Intel Pentium D CPU (-MCP-) cache: 2048 KB flags: (lm pae sse sse2 sse3 vmx) bmips: 12764.6
Clock Speeds: 1: 3191.152 MHz 2: 3191.152 MHz
Graphics: Card: NVIDIA NV44 [GeForce 6200 TurboCache] bus-ID: 03:00.0
X.Org: 1.14.3 driver: nvidia Resolution: 1920x1080@59.9hz
GLX Renderer: GeForce 6200 TurboCache/PCIe/SSE2 GLX Version: 2.1.2 NVIDIA 304.116 Direct Rendering: Yes
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: e800 bus-ID: 01:00.0
IF: eth1 state: up speed: 100 Mbps duplex: full mac: 00:13:8f:cf:c3:2f
Drives: HDD Total Size: 200.0GB (62.3% used) 1: model: WDC_WD2000JS
Info: Processes: 135 Uptime: 6 min Memory: 965.8/2025.1MB Runlevel: 5 Gcc sys: 4.8.2
Client: Shell (bash 4.2.45) inxi: 1.9.16
Ich weiß jetzt natürlich nicht, ob das die optimale Lösung ist.
Stefan
Hallo liebes Forum,
seit neusten läuft der Treiber wieder ohne den Kernelparameter
vmalloc=256M
siehe
hessi@Linux2:~$ inxi -v3
System: Host: Linux2 Kernel: 3.12-7.towo-siduction-686 i686 (32 bit, gcc: 4.8.2)
Desktop: KDE 4.11.3 (Qt 4.8.6) Distro: sidux-20070108-d:4
Machine: Mobo: N/A model: ConRoe945G-DVI Bios: American Megatrends version: P1.10 date: 08/23/2006
CPU: Dual core Intel Pentium D CPU (-MCP-) cache: 2048 KB flags: (lm pae sse sse2 sse3 vmx) bmips: 12764.4
Clock Speeds: 1: 3191.095 MHz 2: 3191.095 MHz
Graphics: Card: NVIDIA NV44 [GeForce 6200 TurboCache] bus-ID: 03:00.0
X.Org: 1.14.5 driver: nvidia Resolution: 1920x1080@59.9hz
GLX Renderer: GeForce 6200 TurboCache/PCIe/SSE2 GLX Version: 2.1.2 NVIDIA 304.116 Direct Rendering: Yes
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: e800 bus-ID: 01:00.0
IF: eth1 state: up speed: 100 Mbps duplex: full mac: 00:13:8f:cf:c3:2f
Drives: HDD Total Size: 200.0GB (61.9% used) 1: model: WDC_WD2000JS
Info: Processes: 140 Uptime: 7 min Memory: 937.8/2025.2MB Runlevel: 5 Gcc sys: 4.8.2
Client: Shell (bash 4.2.45) inxi: 1.9.17
Des weiteren habe ich jetzt alle meine Rechner auf "systemd" umgestellt. Bin sehr zufrieden damit.
Stefan