root@6bft:/home/wolfgang# lshw -short -C memory
H/W path Device Class Description
======================================================
/0/0 memory 64KiB BIOS
/0/4/5 memory 256KiB L1 cache
/0/4/6 memory 1MiB L2 cache
/0/4/7 memory 8MiB L3 cache
/0/34 memory 12GiB System Memory
/0/34/0 memory 2GiB DIMM DDR Synchronous 1333 MHz (0,8 ns)
/0/34/1 memory 4GiB DIMM DDR Synchronous 1333 MHz (0,8 ns)
/0/34/2 memory 2GiB DIMM DDR Synchronous 1333 MHz (0,8 ns)
/0/34/3 memory 4GiB DIMM DDR Synchronous 1333 MHz (0,8 ns)
root@6bft:/home/wolfgang# free -m
total used free shared buff/cache available
Mem: 5963 722 4551 17 689 5002
Swap: 7999 0 7999
Ich frage mich warum "lshw -short -C memory" 12 GB RAM anzeigt und free -m nur 6 GB?
Welchen Kernel verwendest Du?
Hast Du irgendwann irgendwelche speziellen Parameter festgelegt?
uname -a
cat /proc/cmdline
Ist die Bestückung der Slots gemäß Handbuch durchgeführt worden?
Evtl. sollten bestimmte Slots paarweise mit gleichen Modulen bestückt sein.
Grüße
musca
Ja die slots sind lt. Handbuch paarweise bestückt, sonst bootet das system gar nicht. Spezielle Parameter habe ich nicht gesetzt (kein overclocking etc.). Das Board ASUS P7P55_LX hat eine spezielle LED die anzeigen sollte, wenn irgendetwas mit dem RAM nicht stimmt.
cat /proc/cmdline spricht:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-towo.2-siduction-amd64 root=UUID=6e542c00-74b2-47fa-8714-7516d7ad7df7 ro quiet systemd.show_status=1 splash
und uname -a
Linux 6bft 4.9.0-towo.2-siduction-amd64 #1 SMP PREEMPT siduction 4.9-2 (2016-12-30) x86_64 GNU/Linux
Aber dieser moderne Kernel sollte das wohl erkennen ....