In einer älteren nox - labwc Installation wurde bei einem D_U alles, was mit network-manager zusammenhing,
entfernt (ich hatte nicht aufgepasst).
Im chroot habe ich diese Installation heute auf den neuesten Stand gebracht und die betroffenen Pakete wieder installiert.
Dennoch kann ich mich nicht mit dem Netzt verbinden.
nmtui zeigt mir kein wifi.
nmcli zeigt mir:
nmcli
lo: verbunden (extern) to lo
"lo"
loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
inet4 127.0.0.1/8
inet6 ::1/128
eno1: nicht verfügbar
"Realtek RTL8111/8168/8211/8411"
ethernet (r8169), EC:8E:B5:43:DC:B8, hw, mtu 1500
wlo1: nicht verwaltet
"Intel 7265"
wifi (iwlwifi), A4:02:B9:5F:69:69, hw, mtu 1500
Use "nmcli device show" to get complete information about known devices and
"nmcli connection show" to get an overview on active connection profiles.
Consult nmcli(1) and nmcli-examples(7) manual pages for complete usage details.
nmcli device show wlo1
GENERAL.DEVICE: wlo1
GENERAL.TYPE: wifi
GENERAL.HWADDR: A4:02:B9:5F:69:69
GENERAL.MTU: 1500
GENERAL.STATE: 10 (nicht verwaltet)
GENERAL.CONNECTION: --
GENERAL.CON-PATH: --
IP4.ADDRESS[1]: 169.254.9.211/16
IP4.GATEWAY: 0.0.0.0
IP4.ROUTE[1]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 0
IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 0.0.0.0, mt = 1003
IP6.GATEWAY: --
nmcli connection show wlo1
Fehler: Verbindungsprofil wlo1 existiert nicht.
Wie erstellt man ein "Verbindungsprofil", kann jemand helfen?
nmtui
May help get a connection going. Also check that the driver is loaded.
Kann Hilfe in Gang bringen. Überprüfen Sie auch, ob der Fahrer geladen ist.
Thank you, @eriefisher.
The solution was the siduction manual with the network/iwd section.
Die Lösung war das siduction-Handbuch mit dem Abschnitt Netzwerk/iwd. ;D