slow SSD : unresponsive script / nicht antwortendes skript

[rueX]

Could the prob only coming with a slow SSD ?

Only with this "slow" SSD i often get this message:

"WARNING: unresponsive script"

(or: nicht antwortendes skript )

First: only in running "Iceweasel"

later: in running kde : okular ( open a bigger pdf-file )


"Script:chrome://messenger/content/messengercompose/MsgComposeCommands.js:2817

or with German error code:

"WARNUNG: Nicht antwortendes Skript"
Skript:resource:///components/nsPrompter.js:434


And before I am waiting 5-7 minutes - because system freeze !!!

Info: SSD: the smalles and slowest (cheapest) : OCZ Petrol 64GB
           64GB - PTL1-25SAT3-64G

   Max Read: up to 185MB/s
   Max Write: up to 95MB/s
   Random Write 4KB: 7,800 IOPS
   Random Read 4KB: 23,000 IOPS

But it-s a 4x quicker bootup ... (as my HDD samsung sata3 no-ssd)

[dibl]

What do hdparm and smartmontools tell you about the ssd?

Code Select Expand

# hdparm -tT /dev/sdx

Code Select Expand

# smartctl -t short /dev/sdx

later after some minutes:

Code Select Expand

smartctl -l selftest /dev/sdx

to read the test report.

[rueX]

hey dibl,
thx for fast answer !

hdparm -tT /dev/sda

/dev/sda:
Timing cached reads:   21408 MB in  2.00 seconds = 703.52 MB/sec
Timing buffered disk reads: 642 MB in  3.00 seconds = 213.79 MB/sec

smartctl -t short /dev/sda
...system freezes and black screen....the ssd is gone...no ssd in bios.

After power-off 5 min. reboot:

ssd is still in bios

Second: smartctl -t short /dev/sda

same as above !


...
smartctl -H /dev/sda
smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.9-4.towo-siduction-amd64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

and: only this works:

[DeepDayze]

Could it be a sign that the SSD is having problems. Having it disappear from BIOS is not a good sign and it could signify a hardware problem with the SSD.

[dibl]

So the raw speed of your SSD is not bad for a consumer grade SATA 2 device.  I have one here:

Code Select Expand

root@tosh205:/# hdparm -ia /dev/sda

/dev/sda:
readahead     = 256 (on)

Model=OCZ-VERTEX2, FwRev=1.35, SerialNo=OCZ-9290YAGQRH50XN20
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78161328
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes:  pio0 pio1 pio2 pio3 pio4
DMA modes:  mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown:  ATA/ATAPI-2,3,4,5,6,7

* signifies the current active mode

root@tosh205:/# hdparm -tT /dev/sda

/dev/sda:
Timing cached reads:   1166 MB in  2.00 seconds = 582.60 MB/sec
Timing buffered disk reads: 304 MB in  3.01 seconds = 100.85 MB/sec


Of more concern is the failure induced by smartctl -- that should not happen.  That indicates a problem at the hardware/firmware level -- nothing to do with the OS, I believe.  Not sure whether to suspect the BIOS or the SSD firmware, but something is not communicating correctly.

Are there firmware updates available for your BIOS or your SSD?

[dieres]

Once I had a Problem with a OCZ Vertex 2 that worked only with the Chipset intel sata2 port on my Board, not with marvel sata3 port. Every few minutes a freeze of ca. 30 sec. than going on.
This SSD was dead after 8Month, with Money back from Amazon.

[joogi]

Are you sure its a ssd problem? I only know this problem in webdevelopment and there its mostly a javascript interpreter problem. Some webkit (squirell fish) versions have problem with various javascript script. Interesting is the okular part but as far as I know kde also uses squirellfish (formely known as KJS) as script engine?

[rueX]

@joogi:
Yes, I think You are on the right way ! (i often hang with "google.com -search-things" or special investigations on german "building-laws"... Is there a workaround with "squirellfish" around ?

@dieres: I'm in contact with ocz-forum: 2months ago this ssd was "gone" ...but after 4 days suddenly the bios found this ssd. So i updated immediately the firmware, recovered the lost-datas, flash-deleted - and the ssd was near-new ....mmmmh. Mistding. But it runs now for a while ! Is there a 12month -or a 24month "Gewährleistung" if it goes away=completely wrecked ?
They want to send me -in that case - a vertex as a replacement ..afaik.

[DeepDayze]

@joogi:
Yes, I think You are on the right way ! (i often hang with "google.com -search-things" or special investigations on german "building-laws"... Is there a workaround with "squirellfish" around ?

@dieres: I'm in contact with ocz-forum: 2months ago this ssd was "gone" ...but after 4 days suddenly the bios found this ssd. So i updated immediately the firmware, recovered the lost-datas, flash-deleted - and the ssd was near-new ....mmmmh. Mistding. But it runs now for a while ! Is there a 12month -or a 24month "Gewährleistung" if it goes away=completely wrecked ?
They want to send me -in that case - a vertex as a replacement ..afaik.

Maybe take them up on that offer...send them your old drive and they can take a look at it

Firmware updates seem to be a must for ssd's these days to fix bugs or other issues that could arise

[rueX]

Well: my feedback:
Since 3 days ( with steady  d u )  no problems : with unresponsive scripts !

Was there an improvement ?

[DeepDayze]

Well: my feedback:
Since 3 days ( with steady  d u )  no problems : with unresponsive scripts !

Was there an improvement ?

So that firmware update worked?

[rueX]

@DeepDayze:
Yes, ...or so it seems/seems to be

Here is a list of new firmware - versions ( at the beginning of all postings) : http://www.ocztechnologyforum.de/forum/forumdisplay.php?4-SSDs&s=9b88f3fb371439dfd18ce8c7841eaf92

So - i make my daily backup - to be on a saver/more secure side
(':wink:')

[DeepDayze]

Great...give it a few more days and here's hoping your problem is solved and it never hurts to keep a backup