conky, Farben der "bars"

[ayla]

Hallo,
ich schlag mich jetzt -mal wieder- stundenlang mit der neuen config für den conky rum.
Nachdem ich bei @unklarer gelesen hatte dass "own_window_transparent = true" in Zukunft wohl nicht mehr funktionieren wird versuche ich das Ganze mit "own_window_colour" und dem Alpha Kanal hin zu bekommen. 
Transparent bekomme ich ja mit Alphakanal 00 hin. Blöderweise wirkt sich das aber auf meine CPU- und Memory-bars (Anzeige der Auslastung usw) dahingehend aus dass diese aufhellen. Aus satt rot wird ein ziemlich besch... rosa, usw... Schrift bleibt dagegen in den angegebenen Farben satt. Der Versuch $color der bars ebenfalls mit einem alphakanal (#FFFF0000 für Rot und volle Sättigung) zu versehen wird ignoriert. Jemand eine Idee wie ich die vorherigen Farben trotz Transparenz wieder hinbekomme?
Grüße
Jürgen 

[unklarer]

^^🙂  Verwende das Ganze ohne den "Alphakanal". Etwa so:

Code Select Expand

..
--  Window Settings
    own_window = true,
    own_window_type = 'desktop',--utility',override,dock,
    own_window_hints = 'undecorated,skip_taskbar,skip_pager,below',
--own_window_colour = '#000000',
    own_window_class = 'Conky',

Damit, so meine Erfahrung, bleibt der Conky, wie bisher, transparent und die gewohnten Farben erhalten.
Die Verwendung des own_window_colour ist sehr kompliziert in dem Sinne, dass du nicht nur passende RGB/HEX Codes auf einschlägigen Webseiten finden mußt, die dann auch zu deinem verwendeten Hintergrundbild passen müssen. Sonst sehen eben die Farben beschissen aus.

[ayla]

Hallo unklarer, danke für deine Info, hat aber leider nicht funktioniert, die bars bleiben blass.

 Musste auch own_window_type = 'desktop' auf normal setzen, sonst wird wechselnde Schrift immer wieder überschrieben ohne dass die vorhergehende gelöscht wird. War vorher nicht so, mein window_type war immer desktop.
 Was mich jetzt ganz kirre macht: Auch die vorherige Konfiguration mit Own_window_transparent = true behält jetzt die blassen bars bei, aber ich habe auch die configrc nur wieder zurück geänert, kein Backup eingespielt. 
Der conky funktionierte jetzt jahrelang ohne viel zu ändern prima, jetzt muss diese Option geändert werden... -hhm, kein kotzendes smiley in der Auswahl...

Hier meine conkyrc, vielleicht fällt ja jemand was auf was ich im Laufe der Zeit an nötigen neuen Einstellungen/Syntax übersehen habe.

Code Select Expand

conky.config = {

-- THIS CONFIG RELIES ON 2 SCRIPTS, CPUSPEED AND CPUTEMP
-- YOUR SYSTEM MAY NOT REQUIRE THEM, REPLACE AS DESIRED

-- maintain spacing between certain elements
use_spacer = 'right',

-- set to yes if you want conky to be forked in the background
background = false,

use_xft = true,

-- Xft font when Xft is enabled
font = 'Bitstream Vera Sans Mono-9',
--xftfont Andale Mono-9
--xftfont Clean-8
--xftfont cubicfive10:pixelsize=8
--xftfont squaredance10:pixelsize=14
--xftfont swf!t_v02:pixelsize=10

-- Text alpha when using Xft
xftalpha = 1,
--mail_spool $MAIL

-- Update interval in seconds
update_interval = 1.0,

-- Create own window instead of using desktop (required in nautilus)
own_window = true,
-- own_window_argb_visual = true,
own_window_class = 'Conky',
own_window_type = 'normal','utillity','override','dock',
-- own_window_colour = '009da1aa',
-- own_window_transparent = true,
own_window_hints = 'undecorated,below,skip_taskbar,skip_pager',

-- Use double buffering (reduces flicker, may not work for everyone)
double_buffer = true,

-- Minimum size of text area
minimum_width = 310, minimum_height = 1080,

maximum_width = 300,
--min_port_monitors 100

-- Draw shades?
draw_shades = true,

-- Draw outlines?
draw_outline = false,-- amplifies text

-- Draw borders around text
draw_borders = false,


-- Stippled borders?
stippled_borders = 0,

-- border margins
--border_margin 9

-- border width
border_width = 1,

-- Default colors and also border colors, grey90 == #e5e5e5
default_color = 'grey90',
default_shade_color = 'black',
default_outline_color = 'DarkGrey',

-- Text alignment, other possible values are commented
--alignment top_left
alignment = 'top_right',
--alignment bottom_left
--alignment bottom_right

-- Gap between borders of screen and text
gap_x = 10,
gap_y = 40,

-- Subtract file system buffers from used memory?
no_buffers = true,

-- set to yes if you want all text to be in uppercase
uppercase = false,

-- stuff after 'TEXT' will be formatted on screen

};

conky.text = [[
${color cyan}${font DejaVu Sans:size=30}${alignc}${time %T %Z}${font}
${color cyan}${font DejaVu Sans:size=12}${alignc}${time %A, %e. %B %Y}${font}
#${color red}$hr
${color #828282}Kernel: ${color light blue}$kernel $color
${color #828282}Uptime:$color    ${color orange}$uptime$color
${color #828282}CPU model:  ${color light blue}${exec grep -m1 "model name" /proc/cpuinfo |cut -c 32-53}
${color #828282}Chipset:    ${color light blue} Intel CometLake-U GT2
#${exec glxinfo | awk '/Intel/{print $6" "$7}'}
${font Terminus:size=9}TEMPS
${font Terminus:size=9}${color orange}Core 0: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 0| paste -s | cut -d+ -f2 | cut -c1-7}    ${color orange}Core 1: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 1| paste -s | cut -d+ -f2 | cut -c1-7}
${font Terminus:size=9}${color orange}Core 2: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 2| paste -s | cut -d+ -f2 | cut -c1-7}    ${color orange}Core 3: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 3| paste -s | cut -d+ -f2 | cut -c1-7}
#${color #828282}CPU1 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp2_input} ${color BBBBBB}°C
#${color #828282}CPU2 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp3_input} ${color BBBBBB}°C
#${color #828282}CPU3 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp4_input} ${color BBBBBB}°C
#${color #828282}CPU4 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp5_input} ${color BBBBBB}°C
#${color red}$hr
#${color #828282}PROCESSING$color
#${color #828282}CPU1:${tab 30}${color orange}${cpu cpu0}  ${color #828282}CPU5:${tab 30}${color orange}${cpu cpu4}
#${color #828282}CPU2:${tab 30}${color orange}${cpu cpu1}  ${color #828282}CPU6:${tab 30}${color orange}${cpu cpu5}
#${color #828282}CPU3:${tab 30}${color orange}${cpu cpu2}  ${color #828282}CPU7:${tab 30}${color orange}${cpu cpu6}
#${color #828282}CPU4:${tab 30}${color orange}${cpu cpu3}  ${color #828282}CPU8:${tab 30}${color orange}${cpu cpu7}
${color #828282}CPU1-4 (MHz):
${color orange}${execi 3 grep  -m4 MHz /proc/cpuinfo| cut -f3 | awk '{print $2}'}${color}
${color #828282}CPU1-8 (%):
${color #ff0000}${cpubar cpu0 7,145} ${cpubar cpu1 7,145}
${color red}${cpubar cpu2 7,145} ${cpubar cpu3 7,145}
${color red}${cpubar cpu4 7,145} ${cpubar cpu5 7,145}
${color red}${cpubar cpu6 7,145} ${cpubar cpu7 7,145}$color
${color #828282}NAME $alignc  CPU% $alignr MEM%
${color red}${top name 1}$alignc${top cpu 1}%$alignr${top mem 1}
${color light blue}${top name 2}$alignc${top cpu 2}%$alignr${top mem 2}
${color #a3a3a3}${top name 3}$alignc${top cpu 3}%$alignr${top mem 3}
#${color #828282}${top name 4}$alignc${top cpu 4}%$alignr${top mem 4}
#${color #616161}${top name 5}$alignc${top cpu 5}%$alignr${top mem 5}
${color green}Akku:${alignr} ${battery BAT0}
${color green}${alignr} ${battery_time BAT0}
${color green}${battery_bar BAT0}
#${color red}$stippled_hr
#${color #E7881B}DATA$color
${color gold}RAM    :  $mem /  $memmax $memperc%
${membar }${color}
${color #828282}Temp  :${color orange}  ${fs_used /tmp} /  ${fs_size /tmp} ${fs_used_perc /tmp}%
${color #D41A1F}${fs_bar /tmp}$color
${color #828282}Swap  :${color orange}  $swap  /  $swapmax $swapperc%
${color #00FF88}${swapbar }$color
${color #828282}root  :${color orange}  ${fs_used /} /  ${fs_size /} ${fs_used_perc /}%
${color #0088ff}${fs_bar /}$color
${color #0088ff}home  :${color orange}  ${fs_used /home} /  ${fs_size /home} ${fs_used_perc /home}%
${color #0088ff}${fs_bar /home}$color
#${color #828282}var    :${color orange}  ${fs_used /var} /  ${fs_size /var} ${fs_used_perc /var}%
#${color blue}${fs_bar /var}$color
#${color #828282}win    :${color orange}  ${fs_used /win} /  ${fs_size /win} ${fs_used_perc /win}%
#${color #0276FD}${fs_bar /win}$color
#${color #828282}data    :${color orange}  ${fs_used /data} /  ${fs_size /data} ${fs_used_perc /data}%
#${color #0276FD}${fs_bar /data}$color
#${color #828282}musik    :${color orange}  ${fs_used /musik} /  ${fs_size /musik} ${fs_used_perc /musik}%
#${color #0276FD}${fs_bar /musik}$color
#${color #98c2c7}storage :$color ${fs_used /media/storage}/${fs_size /media/storage} ${fs_used_perc /media/storage}%
#${color #78af78}${fs_bar /media/storage}$color
#${color #98c2c7}video  :$color ${fs_used /media/video}/${fs_size /media/video} ${fs_used_perc /media/video}%
#${color #78af78}${fs_bar /media/video}$color
#${color #98c2c7}Data1  :$color ${fs_used /media/data1}/${fs_size /media/data1} ${fs_used_perc /media/data1}%
#${color #78af78}${fs_bar /media/data1}$color
#${color #98c2c7}Data2  :$color ${fs_used /media/data2}/${fs_size /media/data2} ${fs_used_perc /media/data2}%
#${color #78af78}${fs_bar /media/data2}$color
#${color BBBBBB}                    Upload:${color red}  ${upspeed wlan0}
#${color BBBBBB}                    Download:${color red} ${downspeed wlan0}
##################################
##          NETWORK            ##
##################################
${voffset 4}${color light blue}NETWORK${offset 8}${voffset -2}${hr 2}${font}
${voffset 4}${color light blue}${offset 5}Download${goto 120}${color red}${downspeed wlan0}${alignr}${color light blue}${totaldown wlan0}${font}
${voffset 0}${color light blue}${offset 5}Upload${goto 120}${color red}${upspeed wlan0}${alignr}${color light blue}${totalup wlan0}${font}
${voffset 4}${color maroon4}${offset 5}Private${offset 3}IP${goto 123}${alignr}${addr wlan0}${font}
${voffset 0}${color maroon4}${offset 5}IP${alignr}${exec curl -s www.icanhazip.com}
]];


[dibl]

I recently patched my old conky to include the new transparency code. It is working correctly, on a large desktop system with Nvidia graphics. I will post it here for comparisons and any tips it may hold.

Code Select Expand

conky.config = {
    alignment = 'top_right',
    background = 'false',
    border_width = 0,
    cpu_avg_samples = 1,
    net_avg_samples = 2,
    update_interval = 1,
    default_color = white,
    default_outline_color = black,
    default_shade_color = black,
    double_buffer=true,
    own_window = true,
    out_to_wayland = true,
    own_window_type ='desktop',
    own_window_class ='Conky',
    own_window_hints ='undecorated,below,sticky,skip_taskbar,skip_pager',
    own_window_colour = '#00000000',
    maximum_width = 345,
    minimum_width = 345,
    draw_borders = false,
    draw_graph_borders = false,
    draw_outline = false,
    draw_shades = false,
    use_xft = true,
    font = 'terminus:size=9',
    xftalpha = 1,
    gap_x = 10,
    gap_y = 20,
    out_to_console = false,
    out_to_stderr = false,
    extra_newline = false,
    stippled_borders = 0,
    uppercase = false,
    use_spacer = none,
    show_graph_scale = false,
    show_graph_range = false,
    text_buffer_size = 4096,
}
           
conky.text = [[

#${font Terminus:style=bold:size=11}SYSTEM $hr
${goto 105}${font UbuntuTitleBold:size=20}${color4}cville${font}

#Host: $alignr $nodename
#${font Terminus:size=8}
${font Terminus:style=bold:size=14}${time %k:%M:%S}${alignr}${time %a  %d.%b.%Y}${font}

Uptime: $uptime
#Updates Available: ${execi 1200 apt-get update search "~U" | wc -l | tail}${font}
Conky:${conky_version}
$sysname $kernel $alignr $machine
#File system: ${fs_type}
${color light blue}
${font Terminus:style=bold:size=11}PROCESSORS $hr
${font}CPU:$alignr ${exec cat /proc/cpuinfo | grep 'model name' | sort -u | cut -c 14-58}
${font}Core0: ${cpu cpu0}% ${cpubar cpu0 8,width_cpu_bar}
Core1: ${cpu cpu1}% ${cpubar cpu1}
Core2: ${cpu cpu2}% ${cpubar cpu2}
Core3: ${cpu cpu3}% ${cpubar cpu3}
Core4: ${cpu cpu4}% ${cpubar cpu4}
Core5: ${cpu cpu5}% ${cpubar cpu5}
Core6: ${cpu cpu6}% ${cpubar cpu6}
Core7: ${cpu cpu7}% ${cpubar cpu7}
Core8: ${cpu cpu8}% ${cpubar cpu8}
Core9: ${cpu cpu9}% ${cpubar cpu9}
Core10: ${cpu cpu10}% ${cpubar cpu10}
Core11: ${cpu cpu11}% ${cpubar cpu11}
Core12: ${cpu cpu12}% ${cpubar cpu12}
Core13: ${cpu cpu13}% ${cpubar cpu13}
Core14: ${cpu cpu14}% ${cpubar cpu14}
Core15: ${cpu cpu15}% ${cpubar cpu15}
Core16: ${cpu cpu16}% ${cpubar cpu16}
Core17: ${cpu cpu17}% ${cpubar cpu17}
Core18: ${cpu cpu18}% ${cpubar cpu18}
Core19: ${cpu cpu19}% ${cpubar cpu19}
${color pink}
${font Terminus:style=bold:size=11}MEMORY $hr
${font}RAM ${alignc}     $mem/$memmax  $alignr $memperc%
${membar}
Swap:  ${alignc} $swap/$swapmax $alignr $swapperc%
${swapbar 6}
${color white}
${font Terminus:style=bold:size=11}TEMPS $hr
${font Terminus:size=9}${color green}Core 0: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 0| paste -s | cut -d+ -f2 | cut -c1-7}${color green}    ${alignr}${color green}Core 1: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 1| paste -s | cut -d+ -f2 | cut -c1-7}${color green}
${font Terminus:size=9}${color green}Core 2: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 2| paste -s | cut -d+ -f2 | cut -c1-7}${color green}    ${alignr}${color green}Core 3: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 3| paste -s | cut -d+ -f2 | cut -c1-7}${color green}
${font Terminus:size=9}${color green}Core 10: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 28| paste -s | cut -d+ -f2 | cut -c1-7}${color green}    ${alignr}${color green}Core 11: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 32| paste -s | cut -d+ -f2 | cut -c1-7}${color green}
${font Terminus:size=9}${color green}Core 18: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 40| paste -s | cut -d+ -f2 | cut -c1-7}${color green}    ${alignr}${color green}Core 19: ${color white}${execi 5 /usr/bin/sensors | grep Core\ 44| paste -s | cut -d+ -f2 | cut -c1-7}${color green}
${font}GPU Core: ${color white}${execi 60 nvidia-settings -query [gpu:0]/GPUCoreTemp -t}°C${font Terminus:size=9}${alignr}${color green}MOBO Ambient: ${color white}${execi 1 /usr/bin/sensors | grep Composite| paste -s | cut -d+ -f2 | cut -c1-7}${color green}
${font Terminus:size=9}${color green}WD30EZAX-1:    ${color white}${hwmon 5 temp 1}°C ${alignr}${font Terminus:size=9}${color green}WD30EZAX-2:    ${color white}${hwmon 6 temp 1}°C
${font Terminus:size=9}${color green}NVME-1    ${color white}${hwmon 0 temp 1}°C ${alignr}${font Terminus:size=9}${color green}SMSNG SSD 840:    ${color white}${hwmon 2 temp 1}°C
#${execp ~/conkygraphics.sh}
${font}${color orange}
${font Terminus:style=bold:size=11}FILESYSTEMS $hr
${font Terminus:size=9}${color orange}/             ${color white}${fs_used /} / ${fs_size /}${color grey}${alignr}${fs_bar 5,120 /}
${font Terminus:size=9}${color orange}/home     ${color white}${fs_used /home} / ${fs_size /home}${color grey}${alignr}${fs_bar 5,120 /home}
${font Terminus:size=9}${color orange}DATA       ${color white}${fs_used /mnt/DATA} / ${fs_size /mnt/DATA}${color grey}${alignr}${fs_bar 5,120 /mnt/DATA}
${color green}
${font Terminus:style=bold:size=11}TOP PROCESSES $hr${font}
${top name 1}$alignc${top mem 1}%$alignr${top cpu 1}MB
${top name 2}$alignc${top mem 2}%$alignr${top cpu 2}MB
${top name 3}$alignc${top mem 3}%$alignr${top cpu 3}MB
${top name 4}$alignc${top mem 4}%$alignr${top cpu 4}MB
${top name 5}$alignc${top mem 2}%$alignr${top cpu 5}MB
${top name 6}$alignc${top mem 3}%$alignr${top cpu 6}MB

]];

[ayla]

Hello dibl,
thank you for your config. Indeed, out_to_wayland =true brings back the original colours. Unfortunatly this causes two other behaviors:

It ignores alignment top_right and places conky top_left, also, on  reboot or shutdown conky does not close anymore, I have to stop it manually.
Also, after reconfigure -change configrc and save- conky freezes insteed of starting new.

This conky config, which I found relative clear and comfortable in the begining begins to make me crazy and angry in between. Maybe I schould look for an alternative.

 hmm, think I'm to pighaeded to change... 😕

Regards, Jürgen

[unklarer]

Hallo ayla,
ich bin noch unterwegs und sehe deinen Code nur im Smartfon.
Was mir gleich auffällt,

Code Select Expand

own_windows_type = 'normal',und dann fehlen --
Du kannst nicht gleichzeitig 4_type aufrufen.

[unklarer]

Die groben Schnitzer habe ich jetzt aus der Konfiguration entfernt mit (--) Darunter das korrekt eingetragen und unten, nach(config.text) einiges auskommentiert, was auf meinem Rechner nicht vorhanden ist:

Code Select Expand

conky.config = {

-- THIS CONFIG RELIES ON 2 SCRIPTS, CPUSPEED AND CPUTEMP
-- YOUR SYSTEM MAY NOT REQUIRE THEM, REPLACE AS DESIRED

-- maintain spacing between certain elements
use_spacer = 'right',

-- set to yes if you want conky to be forked in the background
background = false,
total_run_times = 0,

use_xft = true,
-- Xft font when Xft is enabled
--font = 'Bitstream Vera Sans Mono-9',
font = 'Bitstream Vera Sans Mono:size=9',
--xftfont Andale Mono-9
--xftfont Clean-8
--xftfont cubicfive10:pixelsize=8
--xftfont squaredance10:pixelsize=14
--xftfont swf!t_v02:pixelsize=10

-- Text alpha when using Xft
xftalpha = 1,

-- Update interval in seconds
update_interval = 1.0,

-- Create own window instead of using desktop (required in nautilus)
out_to_wayland = true,
own_window = true,
own_window_class = 'Conky',
own_window_type = 'desktop',--'utillity','override','dock',
-- own_window_colour = '009da1aa',
own_window_hints = 'undecorated,below,skip_taskbar,skip_pager',

-- Minimum size of text area
minimum_width = 310, minimum_height = 880,
--maximum_width = 300,
maximum_width = 310,

-- Draw shades?
draw_shades = true,

-- Draw outlines?
draw_outline = false,-- amplifies text

-- Draw borders around text
draw_borders = false,


-- Stippled borders?
stippled_borders = 0,

-- border margins
--border_margin 9
border_inner_margin = 5,

-- border width
border_width = 1,

-- Default colors and also border colors, grey90 == #e5e5e5
default_color = 'grey90',
default_shade_color = 'black',
default_outline_color = 'DarkGrey',

-- Text alignment, other possible values are commented
--alignment top_left
alignment = 'top_right',
--alignment bottom_left
--alignment bottom_right

-- Gap between borders of screen and text
gap_x = 10,
gap_y = 10,

-- Subtract file system buffers from used memory?
no_buffers = true,
double_buffer = true,


-- set to yes if you want all text to be in uppercase
uppercase = false,


};

conky.text = [[
${color cyan}${font DejaVu Sans:size=30}${alignc}${time %T %Z}${font}
${color cyan}${font DejaVu Sans:size=12}${alignc}${time %A, %e. %B %Y}${font}
#${color red}$hr
${color #828282}Kernel: ${color light blue}$kernel $color
${color #828282}Uptime:$color    ${color orange}$uptime$color
${color #828282}CPU model:  ${color light blue}${exec grep -m1 "model name" /proc/cpuinfo |cut -c 32-53}
${color #828282}Chipset:    ${color light blue} Intel CometLake-U GT2
#${exec glxinfo | awk '/Intel/{print $6" "$7}'}
${font Terminus:size=9}TEMPS
${font Terminus:size=9}${color orange}Core 0: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 0| paste -s | cut -d+ -f2 | cut -c1-7}    ${color orange}Core 1: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 1| paste -s | cut -d+ -f2 | cut -c1-7}
${font Terminus:size=9}${color orange}Core 2: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 2| paste -s | cut -d+ -f2 | cut -c1-7}    ${color orange}Core 3: ${color green}${execi 5 /usr/bin/sensors | grep Core\ 3| paste -s | cut -d+ -f2 | cut -c1-7}
#${color #828282}CPU1 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp2_input} ${color BBBBBB}°C
#${color #828282}CPU2 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp3_input} ${color BBBBBB}°C
#${color #828282}CPU3 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp4_input} ${color BBBBBB}°C
#${color #828282}CPU4 Temp:    ${color orange}${exec cut -c -2 /sys/class/hwmon/hwmon1/device/temp5_input} ${color BBBBBB}°C
#${color red}$hr
#${color #828282}PROCESSING$color
#${color #828282}CPU1:${tab 30}${color orange}${cpu cpu0}  ${color #828282}CPU5:${tab 30}${color orange}${cpu cpu4}
#${color #828282}CPU2:${tab 30}${color orange}${cpu cpu1}  ${color #828282}CPU6:${tab 30}${color orange}${cpu cpu5}
#${color #828282}CPU3:${tab 30}${color orange}${cpu cpu2}  ${color #828282}CPU7:${tab 30}${color orange}${cpu cpu6}
#${color #828282}CPU4:${tab 30}${color orange}${cpu cpu3}  ${color #828282}CPU8:${tab 30}${color orange}${cpu cpu7}
${color #828282}CPU1-4 (MHz):
${color orange}${execi 3 grep  -m4 MHz /proc/cpuinfo| cut -f3 | awk '{print $2}'}${color}
#${color #828282}CPU1-8 (%):
${color #ff0000}${cpubar cpu0 7,145} ${cpubar cpu1 7,145}
${color red}${cpubar cpu2 7,145} ${cpubar cpu3 7,145}
#${color red}${cpubar cpu4 7,145} ${cpubar cpu5 7,145}
#${color red}${cpubar cpu6 7,145} ${cpubar cpu7 7,145}$color
${color #828282}NAME $alignc  CPU% $alignr MEM%
${color red}${top name 1}$alignc${top cpu 1}%$alignr${top mem 1}
${color light blue}${top name 2}$alignc${top cpu 2}%$alignr${top mem 2}
#${color #a3a3a3}${top name 3}$alignc${top cpu 3}%$alignr${top mem 3}
#${color #828282}${top name 4}$alignc${top cpu 4}%$alignr${top mem 4}
#${color #616161}${top name 5}$alignc${top cpu 5}%$alignr${top mem 5}
#${color green}Akku:${alignr} ${battery BAT0}
#${color green}${alignr} ${battery_time BAT0}
#${color green}${battery_bar BAT0}
#${color red}$stippled_hr
#${color #E7881B}DATA$color
${color gold}RAM    :  $mem /  $memmax $memperc%
${membar }${color}
${color #828282}Temp  :${color orange}  ${fs_used /tmp} /  ${fs_size /tmp} ${fs_used_perc /tmp}%
${color #D41A1F}${fs_bar /tmp}$color
${color #828282}Swap  :${color orange}  $swap  /  $swapmax $swapperc%
${color #00FF88}${swapbar }$color
${color #828282}root  :${color orange}  ${fs_used /} /  ${fs_size /} ${fs_used_perc /}%
${color #0088ff}${fs_bar /}$color
${color #0088ff}home  :${color orange}  ${fs_used /home} /  ${fs_size /home} ${fs_used_perc /home}%
${color #0088ff}${fs_bar /home}$color
#${color #828282}var    :${color orange}  ${fs_used /var} /  ${fs_size /var} ${fs_used_perc /var}%
#${color blue}${fs_bar /var}$color
#${color #828282}win    :${color orange}  ${fs_used /win} /  ${fs_size /win} ${fs_used_perc /win}%
#${color #0276FD}${fs_bar /win}$color
#${color #828282}data    :${color orange}  ${fs_used /data} /  ${fs_size /data} ${fs_used_perc /data}%
#${color #0276FD}${fs_bar /data}$color
#${color #828282}musik    :${color orange}  ${fs_used /musik} /  ${fs_size /musik} ${fs_used_perc /musik}%
#${color #0276FD}${fs_bar /musik}$color
#${color #98c2c7}storage :$color ${fs_used /media/storage}/${fs_size /media/storage} ${fs_used_perc /media/storage}%
#${color #78af78}${fs_bar /media/storage}$color
#${color #98c2c7}video  :$color ${fs_used /media/video}/${fs_size /media/video} ${fs_used_perc /media/video}%
#${color #78af78}${fs_bar /media/video}$color
#${color #98c2c7}Data1  :$color ${fs_used /media/data1}/${fs_size /media/data1} ${fs_used_perc /media/data1}%
#${color #78af78}${fs_bar /media/data1}$color
#${color #98c2c7}Data2  :$color ${fs_used /media/data2}/${fs_size /media/data2} ${fs_used_perc /media/data2}%
#${color #78af78}${fs_bar /media/data2}$color
#${color BBBBBB}                    Upload:${color red}  ${upspeed wlan0}
#${color BBBBBB}                    Download:${color red} ${downspeed wlan0}
##################################
##          NETWORK            ##
##################################
${voffset 4}${color light blue}NETWORK${offset 8}${voffset -2}${hr 2}${font}
${voffset 4}${color light blue}${offset 5}Download${goto 120}${color red}${downspeed wlp3s0}${alignr}${color light blue}${totaldown wlp3s0}${font}
${voffset 0}${color light blue}${offset 5}Upload${goto 120}${color red}${upspeed wlp3s0}${alignr}${color light blue}${totalup wlp3s0}${font}
${voffset 4}${color maroon4}${offset 5}Private${offset 3}IP${goto 123}${alignr}${addr wlp3s0}${font}
${voffset 0}${color maroon4}${offset 5}IP${alignr}${exec curl -s www.icanhazip.com}
]];

Danach sieht der Conky hier auf wayland/niri/noctalia-shell so aus.