plasma widget für netzwerverbindung

Started by unklarer, 2026/10/25, 09:21:53

Previous topic - Next topic

unklarer

Hallo Gemeinde,

In der neuen Big Crime zeigt mir das Widget nach dem Hochfahren des Laptop die wlan-Verbindung mit "Verbunden" an.
In der Konsole scheitert das Update, weil die Sources nicht aufgelöst werden können.

Trenne ich im Widget die "Verbindung" und verbinde anschließend neu, hat auch die Konsole keine Probleme mehr.

Wo ist 'dran zu drehen, dass das wirklich klappt?

hendrikL

Ich hatte ein ähnliches Problem, eigentlich das selbe.

Nicht mit Big_Crime, sondern einer älteren, aber aktuellen Installation.
Bei meinem System stellte sich IPv6 als Bremser heraus.

Du kannst nach einem Neustart mal schauen, ob es daran hängt.

journalctl -o short-monotonic -b -0 | grep -i 'wlan'

Oder halt das kabelgebundene, wenn kein WLAN.

Ich habe in der /etc/iwd/main.conf Folgendes angefügt bzw. das Kommentarzeichen entfernt: EnableIPv6=false

cat /etc/iwd/main.conf

# For complete description of supported configuration options, refer to
# 'man 5 iwd.config'.

[General]
# iwd is capable of performing network configuration on its own, including
# DHCPv4 based address configuration.  By default this behavior is
# disabled, and an external service such as NetworkManager, systemd-network
# or dhcpclient is required.  Uncomment the following line if you want iwd
# to manage network interface configuration.
#
#EnableNetworkConfiguration=true
#
# iwd can randomize your WiFi card's MAC address for additional privacy.  By
# default, this behavior is disabled and the MAC address assigned by the
# kernel driver is used.  The address will be stable when connecting
# to a saved network profile, so as to not interfere with any MAC filtering
# rules that exist on the network.
# If a randomized MAC address is desired, uncomment the setting line below:
#
#AddressRandomization=network
#
# Options below control the roaming thresholds on 2.4 & 5G bands.
# Normally the default values are a good compromise that avoids excessive
# scanning while maintaining good link quality.
#
#RoamThreshold=-70
#RoamThreshold5G=-76
#
[Network]
# If EnableNetworkConfiguration=true is set, iwd forwards DNS information to
# the system resolving service.  The currently supported services are:
# - systemd-resolved ["systemd"]
# - openresolv / resolvconf ["resolvconf"]
# - none
#
# If not set, the value "systemd" is used by default.  Uncomment the value
# below if you are using openresolv:
#
#NameResolvingService=resolvconf
#
# iwd's support for IPv6 should be stable enough and is now enabled by default.
# If you experience any problems and want to force IPv6 to be disabled,
# uncomment the setting below:

EnableIPv6=false




unklarer

Danke, hendrikL, das ist es nicht.

Quotejournalctl -o short-monotonic -b -0 | grep -i 'wlan'
[  20.356416] localhost iwd[735]: udev interface=wlan0 ifindex=4
[  23.031688] localhost.localdomain NetworkManager[858]: <info>  [1793019905.0016] manager: (wlan0): new 802.11 Wi-Fi device (/org/freedesktop/NetworkManager/Devices/3)
[  23.031925] localhost.localdomain NetworkManager[858]: <info>  [1793019905.0018] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', managed-type: 'external')
[  23.044881] localhost.localdomain NetworkManager[858]: <info>  [1793019905.0148] device (wlan0): new IWD device state is disconnected
[  23.046981] localhost.localdomain NetworkManager[858]: <info>  [1793019905.0169] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', managed-type: 'full')

und die main.conf
Quote[General]
EnableNetworkConfiguration=true

[Network]
NameResolvingService=systemd

schließlich habe ich mit nmtui in der 'Bearbeitung' der wlan-Schnittstelle festgestellt, dass das Gerät "wlan0" und "automatisch Verbinden" nicht eingetragen waren.
Seitdem das gemacht ist, ist der Fehler nicht mehr aufgetaucht. Mal gucken, wie lang...