BUGS > Bugs 2013.1.0 (DE / EN)

boot stop/stalls usb mouse

(1/2) > >>

anon_proxy:
Hi all,

Since kernel-3.11.x series and beyond if my usb mouse is actually plugged in the boot just stops/stalls.  I experimented yesterday and found that if the usb mouse is not plugged into the small 4 port usb  hub then the boot is just fine.   Siduction is fine with the usb hub on startup, and once up and running the mouse is just recognised and working straight away when plugged into the hub.


--- Code: ---00:00.0 Host bridge: Silicon Integrated Systems [SiS] 761/M761 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:08.0 IDE interface: Silicon Integrated Systems [SiS] Device 0183 (rev 01)
00:0a.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
00:18.0 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: AMD [Advanced Micro Devices, Inc.] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: AMD/ATI [Advanced Micro Devices, Inc.] Turks PRO [Radeon HD 6570]
01:00.1 Audio device: AMD/ATI [Advanced Micro Devices, Inc.] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
--- End code ---

Dmesg when mouse connected


--- Code: ---[ 6070.060814] usb 4-2.4: USB disconnect, device number 3
[ 6108.958826] usb 4-2.4: new low-speed USB device number 4 using ohci-pci
[ 6109.054821] usb 4-2.4: New USB device found, idVendor=04f3, idProduct=0234
[ 6109.054833] usb 4-2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 6109.054839] usb 4-2.4: Product: OM
[ 6109.066630] input: OM as /devices/pci0000:00/0000:00:03.2/usb4/4-2/4-2.4/4-2.4:1.0/input/input5
[ 6109.067490] hid-generic 0003:04F3:0234.0002: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:03.2-2.4/input0
--- End code ---

Its not a big thing as it can be got around as described, but this does not happen on other systems.

All the best....

dibl:
Question:  does the mouse interrupt boot when it is plugged directly into the USB port on the PC?

anon_proxy:
Actually I did some more experimentation.  But that was curtailed as an another problem resurfaced.


--- Code: ---ata4: SATA linkdown (SStatus 0 SControl 300)
--- End code ---

Its at this point that I reinstalled grub into sda - lilo from slackware was replaced.

The problem has gone.  But why?  All other distros are fine with lilo (apart from pclinuxos) and that is nolonger installed.

Why does booting siduction with lilo cause problems for sid?

All the best...

dibl:
I don't think the siduction user community has a lot of LILO users ....


I have, at some point in the past, observed the type of "boot hangs on the USB interface" that you saw.  Google "lilo hangs on usb bus" and you will see quite a lot.  None of them suggest the issues are limited to Debian sid.   :)

anon_proxy:
Hi

Doesnt do it for debian though either - that is does not hang/stop/freeze.

Cant find any info on the web no matter what search I do.

Trouble is I cant stand grub 2 anymore.

cheers

PS Why the captcha?  is not signing in using a username and password not enough anymore.  TMI my friend.  TMQ's.

Navigation

[0] Message Index

[#] Next page

Go to full version