0 Members and 1 Guest are viewing this topic.
Ich leg meine Partitionen, die ich nutzen möchte einfach mit gparted an und bin durch damit -
calamares --help # nur zum Zeigen der Optionensudo calamares -d
siducer@siduction:~$ sudo calamares -d >> /media/siducer/USB-STICK/calamares.txtQStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'chcon: der Sicherheitskontext von '/' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/boot/efi' konnte nicht ermittelt werden: Datei oder Verzeichnis nicht gefundenchcon: der Sicherheitskontext von '/home' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/proc' konnte nicht ermittelt werden: Die Operation wird nicht unterstütztchcon: der Sicherheitskontext von '/sys' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/dev' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/dev/pts' konnte nicht ermittelt werden: Die Operation wird nicht unterstütztchcon: der Sicherheitskontext von '/fll' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/run' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/run/udev' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/disks' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/media' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/mnt' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/var/tmp' konnte nicht ermittelt werden: Keine Daten verfügbarchcon: der Sicherheitskontext von '/sys/firmware/efi/efivars' konnte nicht ermittelt werden: Die Operation wird nicht unterstützt
22:00:08 [6]: ClearTempMountsJob finished. Here's what was done: "" 22:00:08 [6]: Starting job "Leere Mount-Points für Partitioning-Operation auf /dev/sda" 22:00:08 [6]: ClearMountsJob finished. Here's what was done: "" 22:00:08 [6]: Starting job "Formatiere Partition /dev/sda1 (Dateisystem: fat32, Grösse: 200 MiB) auf ATA WDC WD20EZRZ-00Z." 22:00:10 [6]: Starting job "Formatiere Partition /dev/sda2 (Dateisystem: ext4, Grösse: 66560 MiB) auf ATA WDC WD20EZRZ-00Z." 22:00:14 [6]: Starting job "Formatiere Partition /dev/sda3 (Dateisystem: linuxswap, Grösse: 24576 MiB) auf ATA WDC WD20EZRZ-00Z." 22:00:15 [6]: Starting job "Setze Partitionsinformationen" 22:00:15 [6]: Writing to GlobalStorage["partitions"] 22:00:15 [6]: .. partitions on "/dev/sda" 22:00:15 [6]: .. mapping for "/dev/sda1" "/dev/sda1" mtpoint: : "/boot/efi" fs: : "fat32" fsname : "fat32" uuid : "AC99-DF83" 22:00:15 [6]: .. mapping for "/dev/sda2" "/dev/sda2" mtpoint: : "/" fs: : "ext4" fsname : "ext4" uuid : "fe3aaa71-9793-42e6-a339-xxxxxxxxe81a" 22:00:15 [6]: .. mapping for "/dev/sda3" "/dev/sda3" mtpoint: : "" fs: : "linuxswap" fsname : "linuxswap" uuid : "5bf38ce1-c80d-4a53-b41c-a694f4995feb" 22:00:15 [6]: .. mapping for "/dev/sda4" "/dev/sda4" mtpoint: : "/home" fs: : "ext4" fsname : "ext4" uuid : "22e837d9-27f3-44cc-811d-xxxxxxxx1f0a" 22:00:15 [6]: .. partitions on "/dev/sdc" 22:00:15 [6]: .. mapping for "/dev/sdc1" "/dev/sdc1" mtpoint: : "" fs: : "fat32" fsname : "fat32" uuid : "199E-8787" 22:00:15 [6]: FillGlobalStorageJob writing empty bootLoader value 22:00:15 [6]: Starting job "mount" 22:00:15 [6]: Determining gettext path from ("/home/siducer", "/usr/bin", "/usr/share/locale") 22:00:15 [6]: .. Found "de_DE" in "/usr/share/locale/de_DE" 22:00:15 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/mount/main.py" 22:00:15 [6]: Job description from pretty_name "mount" = "Partitionen mounten." 22:00:15 [6]: Starting job "fllmount" 22:00:15 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/fllmount/main.py" 22:00:15 [6]: Job description from __doc__ "fllmount" = "Generate a / mount point for fll based live systems" 22:00:15 [6]: Starting job "unpackfs" 22:00:15 [6]: Determining gettext path from ("/home/siducer", "/usr/bin", "/usr/share/locale") 22:00:15 [6]: .. Found "de_DE" in "/usr/share/locale/de_DE" 22:00:15 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/unpackfs/main.py" 22:00:15 [6]: Job description from pretty_name "unpackfs" = "Auffüllen von Dateisystemen." 22:01:01 [6]: Starting job "fllumount" 22:01:01 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/fllumount/main.py" 22:01:01 [6]: Job description from __doc__ "fllumount" = "Generate a / mount point for fll based live systems" 22:01:01 [6]: Starting job "fllexclusions" 22:01:01 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/fllexclusions/main.py" 22:01:01 [6]: Job description from __doc__ "fllexclusions" = "Remove some fll leftovers - thats what the fll-installer would do." 22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/etc/network/run/*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/etc/network/run/*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.DCOPserver_*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.DCOPserver_*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.local/share/akonadi*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.local/share/akonadi*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.gvfs*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.gvfs*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.kde/cache-*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.kde/cache-*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.kde/socket-*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.kde/socket-*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.kde/tmp-*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.kde/tmp-*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.*uthority") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.*uthority") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/Desktop/calamares.desktop") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/Desktop/calamares.desktop") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/home/*/.kaxtv*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/home/*/.kaxtv*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/lib/init/rw/*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/lib/init/rw/*") 22:01:01 [6]: Target output:22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-rf", "/var/cache/gdm/*") 22:01:01 [6]: Finished. Exit code: 0 22:01:01 [6]: Target cmd: ("/bin/rm", "-rf", "/var/cache/gdm/*") 22:01:01 [6]: Target output:22:01:01 [6]: Starting job "fllfixetc" 22:01:01 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/fllfixetc/main.py" 22:01:01 [6]: Job description from __doc__ "fllfixetc" = "Remove some fll leftovers - thats what the fll-installer would do." 22:01:01 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "sync") 22:01:22 [6]: Finished. Exit code: 0 22:01:22 [6]: Target cmd: ("sync") 22:01:22 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "make-ssl-cert", "generate-default-snakeoil", "--force-overwrite") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("make-ssl-cert", "generate-default-snakeoil", "--force-overwrite") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/cp", "-f", "/usr/share/base-files/profile", "/etc/profile") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/cp", "-f", "/usr/share/base-files/profile", "/etc/profile") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/etc/sudoers.d/10-installer") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/etc/sudoers.d/10-installer") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/etc/sudoers.d/15_siduction") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/etc/sudoers.d/15_siduction") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/etc/systemd/system/getty@.service") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/etc/systemd/system/getty@.service") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/etc/systemd/system/autovt@.service") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/etc/systemd/system/autovt@.service") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/ln", "-sf", "/lib/systemd/system/autovt@.service", "/etc/systemd/system/getty.target.wants/getty@tty1.service") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/ln", "-sf", "/lib/systemd/system/autovt@.service", "/etc/systemd/system/getty.target.wants/getty@tty1.service") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/sh", "-c", "/bin/sed -i '/^#.*pam_lastlog\\.so/s/^#[ \t]\\+//' /etc/pam.d/login") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/sh", "-c", "/bin/sed -i '/^#.*pam_lastlog\\.so/s/^#[ \t]\\+//' /etc/pam.d/login") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/etc/blkid.tab*") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/etc/blkid.tab*") 22:01:23 [6]: Target output:22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/rm", "-f", "/var/lib/sddm/state.conf") 22:01:23 [6]: Finished. Exit code: 0 22:01:23 [6]: Target cmd: ("/bin/rm", "-f", "/var/lib/sddm/state.conf") 22:01:23 [6]: Target output:22:01:23 [6]: Starting job "fllfixhome" 22:01:23 [6]: Job file "/usr/lib/x86_64-linux-gnu/calamares/modules/fllfixhome/main.py" 22:01:23 [6]: Job description from __doc__ "fllfixhome" = "Remove some fll leftovers - thats what the fll-installer would do." 22:01:23 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/mv", "/home/siducer", "/home/benutzer") 22:01:24 [6]: Finished. Exit code: 0 22:01:24 [6]: Target cmd: ("/bin/mv", "/home/siducer", "/home/benutzer") 22:01:24 [6]: Target output:22:01:24 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "chown", "-R", "benutzer:", "/home/benutzer") 22:01:24 [6]: Finished. Exit code: 1 22:01:24 [6]: Target cmd: ("chown", "-R", "benutzer:", "/home/benutzer") 22:01:24 [6]: Target output:chown: invalid spec: 'benutzer:'22:01:24 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/sh", "-c", "/usr/bin/find /home/benutzer -type f -exec /bin/sed -i 's|/home/siducer|/home/benutzer|g' {} \\;") 22:06:31 [8]: Shutting down Calamares... 22:06:31 [8]: .. Finished shutdown. 22:06:31 [0]: QProcess: Destroyed while process ("chroot") is still running.
22:01:24 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "chown", "-R", "benutzer:", "/home/benutzer") 22:01:24 [6]: Finished. Exit code: 1 22:01:24 [6]: Target cmd: ("chown", "-R", "benutzer:", "/home/benutzer") 22:01:24 [6]: Target output:chown: invalid spec: 'benutzer:'22:01:24 [6]: Running "chroot" ("/tmp/calamares-root-86axcz40", "/bin/sh", "-c", "/usr/bin/find /home/benutzer -type f -exec /bin/sed -i 's|/home/siducer|/home/benutzer|g' {} \\;")
$ stat 273_Windows_XP_wird_eingestellt__Tauchcenter_stellt_auf_Linux_um.pdf Datei: '273_Windows_XP_wird_eingestellt__Tauchcenter_stellt_auf_Linux_um.pdf' Größe: 307795 Blöcke: 608 EA Block: 4096 Normale DateiGerät: 804h/2052d Inode: 22151244 Verknüpfungen: 1Zugriff: (0640/-rw-r-----) Uid: ( 1000/benutzer) Gid: ( 1000/benutzer)Zugriff : 2019-08-07 21:22:50.445220905 +0200Modifiziert: 2019-08-05 22:01:37.519626637 +0200Geändert : 2019-08-05 22:01:37.519626637 +0200 Geburt : -