Hallo
besten Dank für Eure Rückmeldung. Folgendes wird ausgegeben:
In der fstab sind folgende Einträge:# <filesystem> <mount point> <fstype> <mount options> <dump> <pass>
/dev/disk/by-uuid/88D0C048D0C03E66 /media/WinXP ntfs auto,users,ro,dmask=0022,fmask=0133,nls=utf8 0 0
UUID=8628afb3-cd8e-4af6-bc8c-fc9c2395698d / ext4 defaults,errors=remount-ro,noatime,barrier=0 0 1
UUID=ded9f25d-eb70-493c-ba03-26868b8d21d5 /home ext4 defaults,noatime 0 2
/dev/disk/by-uuid/73EA-CD99 /media/Transfer vfat auto,users,rw,quiet,umask=000,shortname=lower 0 0
UUID=88920519-c1c0-47c0-ad48-1d002db9ecbe /media/homedata ext4 auto,users,rw,exec,noatime 0 2
/dev/cdrom /media/cdrom udf,iso9660 noauto,ro,users 0 0
/dev/disk/by-label/Backup /media/Backup ext4 auto,users,rw,exec,noatime 0 2
dmesg mit eingelegter CD gibt aus:
[ 0.261875] ACPI: Dynamic OEM Table Load:
[ 0.261877] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.262040] ACPI: SSDT 00000000bfee8680 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.262190] ACPI: Dynamic OEM Table Load:
[ 0.262192] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.262226] ACPI: Interpreter enabled
[ 0.262228] ACPI: (supports S0 S3 S4 S5)
[ 0.262243] ACPI: Using IOAPIC for interrupt routing
[ 0.270106] ACPI: No dock devices found.
[ 0.270109] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.271050] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.271052] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.271054] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.271056] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.271058] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 0.271108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.271111] pci 0000:00:01.0: PME# disabled
[ 0.271163] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f]
[ 0.271213] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f]
[ 0.271262] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f]
[ 0.271320] pci 0000:00:1a.7: reg 10: [mem 0xea104000-0xea1043ff]
[ 0.271381] pci 0000:00:1b.0: reg 10: [mem 0xea100000-0xea103fff 64bit]
[ 0.271412] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271415] pci 0000:00:1b.0: PME# disabled
[ 0.271464] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271467] pci 0000:00:1c.0: PME# disabled
[ 0.271517] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.271520] pci 0000:00:1c.3: PME# disabled
[ 0.271570] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.271573] pci 0000:00:1c.4: PME# disabled
[ 0.271613] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.271663] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.271713] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.271754] pci 0000:00:1d.7: reg 10: [mem 0xea105000-0xea1053ff]
[ 0.271875] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.271878] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.271881] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.271883] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.271921] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.271925] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.271929] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.271933] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.271937] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.271941] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f]
[ 0.271974] pci 0000:00:1f.3: reg 10: [mem 0xea106000-0xea1060ff 64bit]
[ 0.271984] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.272018] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707]
[ 0.272022] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803]
[ 0.272026] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907]
[ 0.272030] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03]
[ 0.272034] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f]
[ 0.272038] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.272090] pci 0000:01:00.0: reg 10: [mem 0xe6000000-0xe6ffffff]
[ 0.272097] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.272103] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe5ffffff 64bit]
[ 0.272107] pci 0000:01:00.0: reg 24: [io 0xb000-0xb07f]
[ 0.272111] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272145] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.272147] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.272149] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.272152] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.272182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.272185] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.272188] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272192] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272290] pci 0000:03:00.0: reg 24: [mem 0xea000000-0xea001fff]
[ 0.272336] pci 0000:03:00.0: PME# supported from D3hot
[ 0.272341] pci 0000:03:00.0: PME# disabled
[ 0.272380] pci 0000:03:00.1: reg 10: [io 0xc000-0xc007]
[ 0.272388] pci 0000:03:00.1: reg 14: [io 0xc100-0xc103]
[ 0.272395] pci 0000:03:00.1: reg 18: [io 0xc200-0xc207]
[ 0.272402] pci 0000:03:00.1: reg 1c: [io 0xc300-0xc303]
[ 0.272409] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.272462] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272473] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.272476] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.272479] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff]
[ 0.272483] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272542] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.272561] pci 0000:04:00.0: reg 18: [mem 0xe9000000-0xe9000fff 64bit]
[ 0.272579] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272620] pci 0000:04:00.0: supports D1 D2
[ 0.272621] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.272625] pci 0000:04:00.0: PME# disabled
[ 0.272645] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272653] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.272656] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.272659] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.272663] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272711] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.272714] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.272717] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272721] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272723] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.272725] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.272727] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.272728] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.272730] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 0.272747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.272867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.272910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.272946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.286058] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.286126] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.286193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.286259] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.286326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.286393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.286459] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.286526] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.286564] HEST: Table is not found!
[ 0.287009] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.287012] vgaarb: loaded
[ 0.287038] PCI: Using ACPI for IRQ routing
[ 0.287038] PCI: pci_cache_line_size set to 64 bytes
[ 0.287073] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.287075] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
[ 0.287089] NetLabel: Initializing
[ 0.287089] NetLabel: domain hash size = 128
[ 0.287089] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.287089] NetLabel: unlabeled traffic allowed by default
[ 0.287089] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.287089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.287089] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.291011] Switching to clocksource tsc
[ 0.291030] pnp: PnP ACPI init
[ 0.291031] ACPI: bus type pnp registered
[ 0.293683] pnp: PnP ACPI: found 14 devices
[ 0.293684] ACPI: ACPI bus type pnp unregistered
[ 0.293690] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.293693] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.293694] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.293697] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.293698] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.293703] system 00:0a: [io 0x0400-0x04bf] could not be reserved
[ 0.293709] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.293713] system 00:0c: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.293715] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.293717] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.293720] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.293722] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved
[ 0.293724] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.293726] system 00:0c: [mem 0x00100000-0xbfedffff] could not be reserved
[ 0.293728] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.293730] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.293732] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.293734] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.293735] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.293737] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.293739] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.303623] pci 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
[ 0.303626] pci 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303628] pci 0000:00:1c.3: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303631] pci 0000:00:1c.4: BAR 15: assigned [mem 0xea800000-0xea9fffff pref]
[ 0.303633] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe701ffff pref]
[ 0.303635] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.303637] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.303640] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
[ 0.303642] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.303645] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.303647] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.303651] pci 0000:00:1c.0: bridge window [mem 0xea200000-0xea3fffff]
[ 0.303654] pci 0000:00:1c.0: bridge window [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303658] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.303660] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.303664] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xea0fffff]
[ 0.303667] pci 0000:00:1c.3: bridge window [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303671] pci 0000:04:00.0: BAR 6: assigned [mem 0xea800000-0xea81ffff pref]
[ 0.303673] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.303675] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.303679] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.303681] pci 0000:00:1c.4: bridge window [mem 0xea800000-0xea9fffff pref]
[ 0.303686] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.303688] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.303691] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.303694] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.303701] alloc irq_desc for 16 on node -1
[ 0.303703] alloc kstat_irqs on node -1
[ 0.303707] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303709] pci 0000:00:01.0: setting latency timer to 64
[ 0.303715] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303718] pci 0000:00:1c.0: setting latency timer to 64
[ 0.303723] alloc irq_desc for 19 on node -1
[ 0.303724] alloc kstat_irqs on node -1
[ 0.303726] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.303729] pci 0000:00:1c.3: setting latency timer to 64
[ 0.303735] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.303738] pci 0000:00:1c.4: setting latency timer to 64
[ 0.303742] pci 0000:00:1e.0: setting latency timer to 64
[ 0.303745] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.303746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.303748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.303749] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.303751] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.303752] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.303754] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff]
[ 0.303755] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.303757] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.303759] pci_bus 0000:02: resource 1 [mem 0xea200000-0xea3fffff]
[ 0.303760] pci_bus 0000:02: resource 2 [mem 0xea400000-0xea5fffff 64bit pref]
[ 0.303762] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.303763] pci_bus 0000:03: resource 1 [mem 0xea000000-0xea0fffff]
[ 0.303765] pci_bus 0000:03: resource 2 [mem 0xea600000-0xea7fffff 64bit pref]
[ 0.303767] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.303768] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.303770] pci_bus 0000:04: resource 2 [mem 0xea800000-0xea9fffff pref]
[ 0.303771] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.303773] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.303774] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.303776] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.303777] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.303779] pci_bus 0000:05: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.303797] NET: Registered protocol family 2
[ 0.303898] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304593] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.307156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.307582] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.307584] TCP reno registered
[ 0.307592] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.307626] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.307743] NET: Registered protocol family 1
[ 0.307923] pci 0000:01:00.0: Boot video device
[ 0.307932] PCI: CLS 32 bytes, default 64
[ 0.307974] Unpacking initramfs...
[ 0.503368] Freeing initrd memory: 11464k freed
[ 0.506559] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.506563] Placing 64MB software IO TLB between ffff880001e79000 - ffff880005e79000
[ 0.506565] software IO TLB at phys 0x1e79000 - 0x5e79000
[ 0.508871] audit: initializing netlink socket (disabled)
[ 0.508884] type=2000 audit(1284821690.507:1): initialized
[ 0.509197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.513277] VFS: Disk quotas dquot_6.5.2
[ 0.513370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.513486] msgmni has been set to 7933
[ 0.513878] alg: No test for stdrng (krng)
[ 0.514083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.514086] io scheduler noop registered
[ 0.514088] io scheduler deadline registered
[ 0.514163] io scheduler cfq registered (default)
[ 0.514276] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.514292] alloc irq_desc for 40 on node -1
[ 0.514294] alloc kstat_irqs on node -1
[ 0.514301] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.514448] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.514470] alloc irq_desc for 41 on node -1
[ 0.514472] alloc kstat_irqs on node -1
[ 0.514476] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.514697] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.514719] alloc irq_desc for 42 on node -1
[ 0.514720] alloc kstat_irqs on node -1
[ 0.514725] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.514944] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.514967] alloc irq_desc for 43 on node -1
[ 0.514968] alloc kstat_irqs on node -1
[ 0.514973] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.515702] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005100000, using 1536k, total 1536k
[ 0.515704] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 0.515706] vesafb: scrolling: redraw
[ 0.515707] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.525678] Console: switching to colour frame buffer device 128x48
[ 0.534779] fb0: VESA VGA frame buffer device
[ 0.534965] ERST: Table is not found!
[ 0.535284] Linux agpgart interface v0.103
[ 0.535286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.535421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.535980] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.536363] Fixed MDIO Bus: probed
[ 0.536506] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.536507] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.536666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.536868] mice: PS/2 mouse device common for all mice
[ 0.536936] cpuidle: using governor ladder
[ 0.536937] cpuidle: using governor menu
[ 0.537113] TCP cubic registered
[ 0.537405] NET: Registered protocol family 10
[ 0.537721] lo: Disabled Privacy Extensions
[ 0.538126] registered taskstats version 1
[ 0.538416] Freeing unused kernel memory: 664k freed
[ 0.553771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.591488] udev: starting version 161
[ 0.632035] usbcore: registered new interface driver usbfs
[ 0.632059] usbcore: registered new interface driver hub
[ 0.635000] usbcore: registered new device driver usb
[ 0.647758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.647791] alloc irq_desc for 18 on node -1
[ 0.647792] alloc kstat_irqs on node -1
[ 0.647799] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.647831] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.647833] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.647849] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.647894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.647916] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.647969] r8169 0000:04:00.0: setting latency timer to 64
[ 0.648032] alloc irq_desc for 44 on node -1
[ 0.648034] alloc kstat_irqs on node -1
[ 0.648047] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 0.648381] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000066a000, 00:1a:4d:56:53:78, XID 18000000 IRQ 44
[ 0.650563] SCSI subsystem initialized
[ 0.654043] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.654059] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea104000
[ 0.663943] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.663959] libata version 3.00 loaded.
[ 0.663965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.663967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.663969] usb usb1: Product: EHCI Host Controller
[ 0.663970] usb usb1: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[ 0.663972] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.664060] hub 1-0:1.0: USB hub found
[ 0.664064] hub 1-0:1.0: 6 ports detected
[ 0.664135] alloc irq_desc for 23 on node -1
[ 0.664137] alloc kstat_irqs on node -1
[ 0.664141] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.664164] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.664167] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.664174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.668065] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.668079] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea105000
[ 0.677857] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.677874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.677877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.677879] usb usb2: Product: EHCI Host Controller
[ 0.677881] usb usb2: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[ 0.677883] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.677958] hub 2-0:1.0: USB hub found
[ 0.677962] hub 2-0:1.0: 6 ports detected
[ 0.678048] ata_piix 0000:00:1f.2: version 2.13
[ 0.678072] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.678076] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.678111] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.678154] scsi0 : ata_piix
[ 0.678213] scsi1 : ata_piix
[ 0.678749] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.678753] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.678791] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.678795] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.678821] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.680075] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.680080] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.680101] scsi2 : ata_piix
[ 0.680116] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.680187] scsi3 : ata_piix
[ 0.680189] scsi4 : pata_jmicron
[ 0.680283] scsi5 : pata_jmicron
[ 0.680465] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.681585] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 0.681588] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 0.681611] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.681617] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.681619] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.681625] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.681647] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 0.681671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.681673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681674] usb usb3: Product: UHCI Host Controller
[ 0.681676] usb usb3: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.681677] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.681740] hub 3-0:1.0: USB hub found
[ 0.681743] hub 3-0:1.0: 2 ports detected
[ 0.681833] alloc irq_desc for 21 on node -1
[ 0.681834] alloc kstat_irqs on node -1
[ 0.681837] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.681843] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.681845] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.681851] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.681876] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 0.681899] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.681901] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.681902] usb usb4: Product: UHCI Host Controller
[ 0.681904] usb usb4: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.681905] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.682002] hub 4-0:1.0: USB hub found
[ 0.682005] hub 4-0:1.0: 2 ports detected
[ 0.682017] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[ 0.682020] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[ 0.682079] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.682083] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.682085] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.682090] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.682109] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 0.682133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682137] usb usb5: Product: UHCI Host Controller
[ 0.682138] usb usb5: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682139] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.682192] hub 5-0:1.0: USB hub found
[ 0.682195] hub 5-0:1.0: 2 ports detected
[ 0.682251] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.682255] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.682257] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.682262] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.682281] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.682303] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682304] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682306] usb usb6: Product: UHCI Host Controller
[ 0.682307] usb usb6: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682308] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.682360] hub 6-0:1.0: USB hub found
[ 0.682363] hub 6-0:1.0: 2 ports detected
[ 0.682414] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.682418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.682420] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.682429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.682448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.682470] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682471] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682473] usb usb7: Product: UHCI Host Controller
[ 0.682474] usb usb7: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682476] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.682528] hub 7-0:1.0: USB hub found
[ 0.682530] hub 7-0:1.0: 2 ports detected
[ 0.682580] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.682584] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.682587] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.682591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.682609] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.682631] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.682633] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682634] usb usb8: Product: UHCI Host Controller
[ 0.682636] usb usb8: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[ 0.682637] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.682688] hub 8-0:1.0: USB hub found
[ 0.682691] hub 8-0:1.0: 2 ports detected
[ 0.978184] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 0.995770] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.006371] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.098015] usb 2-4: New USB device found, idVendor=058f, idProduct=6362
[ 1.098018] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.098020] usb 2-4: Product: Mass Storage Device
[ 1.098022] usb 2-4: Manufacturer: Generic
[ 1.098024] usb 2-4: SerialNumber: 058F312D81B1
[ 1.102517] Initializing USB Mass Storage driver...
[ 1.102605] scsi6 : usb-storage 2-4:1.0
[ 1.102683] usbcore: registered new interface driver usb-storage
[ 1.102684] USB Mass Storage support registered.
[ 1.200008] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 1.314397] usb 2-5: New USB device found, idVendor=0424, idProduct=2504
[ 1.314400] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.314564] hub 2-5:1.0: USB hub found
[ 1.314649] hub 2-5:1.0: 4 ports detected
[ 1.442056] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.442068] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.443055] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.443068] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.448198] ata1.00: HPA detected: current 156299375, native 156301488
[ 1.448203] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 1.448206] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.448615] ata1.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.448618] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.452202] ata1.00: configured for UDMA/133
[ 1.458509] ata1.01: configured for UDMA/133
[ 1.458613] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.458713] scsi 0:0:1:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.460337] ata2.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
[ 1.460340] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.460363] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[ 1.466539] ata2.00: configured for UDMA/133
[ 1.473136] ata2.01: configured for UDMA/100
[ 1.473517] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
[ 1.474167] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5
[ 1.640269] ahci 0000:03:00.0: version 3.0
[ 1.640285] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.648314] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.648346] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.648352] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.648370] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.648373] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.648386] sd 1:0:0:0: [sdc] Write Protect is off
[ 1.648388] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.648394] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648405] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648408] sd 0:0:0:0: [sda] Write Protect is off
[ 1.648410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.648425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648549] sdb:
[ 1.648623] sdc:
[ 1.652030] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.652032] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.652037] ahci 0000:03:00.0: setting latency timer to 64
[ 1.652165] scsi7 : ahci
[ 1.652230] scsi8 : ahci
[ 1.652311] ata7: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000100 irq 19
[ 1.652315] ata8: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000180 irq 19
[ 1.654437] sdc1
[ 1.659056] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.659058] Uniform CD-ROM driver Revision: 3.20
[ 1.659134] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 1.659144] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.660758] sdb1
[ 1.660808] sda: sda1 sda2 sda3 sda4
[ 1.661133] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.661154] usb 8-2: new full speed USB device using uhci_hcd and address 2
[ 1.661283] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.831656] usb 8-2: New USB device found, idVendor=046d, idProduct=c51a
[ 1.831659] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.831662] usb 8-2: Product: USB Receiver
[ 1.831664] usb 8-2: Manufacturer: Logitech
[ 1.847308] usbcore: registered new interface driver hiddev
[ 1.848873] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input1
[ 1.848912] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[ 1.853742] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input2
[ 1.853814] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[ 1.853871] usbcore: registered new interface driver usbhid
[ 1.853873] usbhid: USB HID core driver
[ 1.957024] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.957053] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.971328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.971356] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.971379] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.971399] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 2.103796] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.104433] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.105055] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.105690] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.106196] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.106453] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 2.106593] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 2.106737] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 2.110890] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 2.111725] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2.112286] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 2.112913] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 2.182190] device-mapper: uevent: version 1.0.3