Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: [DE] CD- DVD- Rom nicht mehr ansprechbar  (Read 6985 times)

Beni

  • Guest
[DE] CD- DVD- Rom nicht mehr ansprechbar
« on: 2010/09/18, 00:15:11 »
Hallo
mein CD-Rom ist seit heute nicht mehr ansprechbar  :( Dieses Problem ist im Sidux-Forum unter
http://sidux.com/index.php?name=PNphpBB2&file=viewtopic&t=21213&highlight=cdrom
angesprochen worden, wie es aber aussieht ohne Ergebnis.
Bei mir tritt dieses Verhalten seit dem Update auf aptosid auf. Allerdings bleibt bei mir ein manuelles mounten als root auch erfolglos. Das Laufwerk habe ich gewechselt, ohne Erfolg.
Code: [Select]

mount /dev/sr0
gibt
Code: [Select]
mount: can't find /dev/sr0 in /etc/fstab or /etc/mtabaus.
In der fstab ist das Laufwerk eingetragen, dies hilft aber nichts. Ein löschen des Eintrages bewirkt ebenfalls nichts.
In der mtab steht überhaubt kein CD-Rom drinnen. Stimmt das so? Oder sollte dort was stehen?

Hat vielleicht schon jemand eine Lösung gefunden?

Danke und Gruss
Beni

hefee

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #1 on: 2010/09/18, 01:41:04 »
willst du einfach mal deine fstab hier hinschreiben? Würde einiges erleichtern und auch einen auszug aus dmesg, nach dem einlegen einer cd...

Offline gerd

  • User
  • Posts: 147
CD- DVD- Rom nicht mehr ansprechbar
« Reply #2 on: 2010/09/18, 11:02:58 »
Evtl. wäre auch die Ausgabe von "ls /dev" hilfreich. VLt. existiert das CD-LW ja unter einem anderen Namen (Bei mir ist das so, aber ich habe auch keine Standard-Sidux/Aptosid-Installation).

Beni

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #3 on: 2010/09/18, 15:23:34 »
Hallo
besten Dank für Eure Rückmeldung. Folgendes wird ausgegeben:
In der fstab sind folgende Einträge:
Code: [Select]
# <filesystem>                                <mount point>                  <fstype>        <mount options>                          <dump> <pass>

/dev/disk/by-uuid/88D0C048D0C03E66            /media/WinXP                   ntfs            auto,users,ro,dmask=0022,fmask=0133,nls=utf8   0      0

UUID=8628afb3-cd8e-4af6-bc8c-fc9c2395698d     /                              ext4            defaults,errors=remount-ro,noatime,barrier=0   0      1

UUID=ded9f25d-eb70-493c-ba03-26868b8d21d5     /home                          ext4            defaults,noatime                           0      2

/dev/disk/by-uuid/73EA-CD99                   /media/Transfer                vfat            auto,users,rw,quiet,umask=000,shortname=lower   0      0

UUID=88920519-c1c0-47c0-ad48-1d002db9ecbe     /media/homedata                ext4            auto,users,rw,exec,noatime                 0      2

/dev/cdrom                                    /media/cdrom                   udf,iso9660     noauto,ro,users                            0      0

/dev/disk/by-label/Backup      /media/Backup                  ext4            auto,users,rw,exec,noatime                 0      2
dmesg mit eingelegter CD gibt aus:
Code: [Select]


[    0.261875] ACPI: Dynamic OEM Table Load:
[    0.261877] ACPI: SSDT (null) 00152 (v01  PmRef  Cpu2Ist 00003000 INTL 20040311)
[    0.262040] ACPI: SSDT 00000000bfee8680 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
[    0.262190] ACPI: Dynamic OEM Table Load:
[    0.262192] ACPI: SSDT (null) 00152 (v01  PmRef  Cpu3Ist 00003000 INTL 20040311)
[    0.262226] ACPI: Interpreter enabled
[    0.262228] ACPI: (supports S0 S3 S4 S5)
[    0.262243] ACPI: Using IOAPIC for interrupt routing
[    0.270106] ACPI: No dock devices found.
[    0.270109] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270181] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.271050] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.271052] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.271054] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.271056] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.271058] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xfebfffff]
[    0.271108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.271111] pci 0000:00:01.0: PME# disabled
[    0.271163] pci 0000:00:1a.0: reg 20: [io  0xe100-0xe11f]
[    0.271213] pci 0000:00:1a.1: reg 20: [io  0xe200-0xe21f]
[    0.271262] pci 0000:00:1a.2: reg 20: [io  0xe000-0xe01f]
[    0.271320] pci 0000:00:1a.7: reg 10: [mem 0xea104000-0xea1043ff]
[    0.271381] pci 0000:00:1b.0: reg 10: [mem 0xea100000-0xea103fff 64bit]
[    0.271412] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.271415] pci 0000:00:1b.0: PME# disabled
[    0.271464] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.271467] pci 0000:00:1c.0: PME# disabled
[    0.271517] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.271520] pci 0000:00:1c.3: PME# disabled
[    0.271570] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.271573] pci 0000:00:1c.4: PME# disabled
[    0.271613] pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
[    0.271663] pci 0000:00:1d.1: reg 20: [io  0xe400-0xe41f]
[    0.271713] pci 0000:00:1d.2: reg 20: [io  0xe500-0xe51f]
[    0.271754] pci 0000:00:1d.7: reg 10: [mem 0xea105000-0xea1053ff]
[    0.271875] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.271878] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.271881] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.271883] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.271921] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.271925] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.271929] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.271933] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.271937] pci 0000:00:1f.2: reg 20: [io  0xf000-0xf00f]
[    0.271941] pci 0000:00:1f.2: reg 24: [io  0xfc00-0xfc0f]
[    0.271974] pci 0000:00:1f.3: reg 10: [mem 0xea106000-0xea1060ff 64bit]
[    0.271984] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.272018] pci 0000:00:1f.5: reg 10: [io  0xe700-0xe707]
[    0.272022] pci 0000:00:1f.5: reg 14: [io  0xe800-0xe803]
[    0.272026] pci 0000:00:1f.5: reg 18: [io  0xe900-0xe907]
[    0.272030] pci 0000:00:1f.5: reg 1c: [io  0xea00-0xea03]
[    0.272034] pci 0000:00:1f.5: reg 20: [io  0xeb00-0xeb0f]
[    0.272038] pci 0000:00:1f.5: reg 24: [io  0xec00-0xec0f]
[    0.272090] pci 0000:01:00.0: reg 10: [mem 0xe6000000-0xe6ffffff]
[    0.272097] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.272103] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe5ffffff 64bit]
[    0.272107] pci 0000:01:00.0: reg 24: [io  0xb000-0xb07f]
[    0.272111] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.272145] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.272147] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.272149] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe7ffffff]
[    0.272152] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.272182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.272185] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.272188] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.272192] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.272290] pci 0000:03:00.0: reg 24: [mem 0xea000000-0xea001fff]
[    0.272336] pci 0000:03:00.0: PME# supported from D3hot
[    0.272341] pci 0000:03:00.0: PME# disabled
[    0.272380] pci 0000:03:00.1: reg 10: [io  0xc000-0xc007]
[    0.272388] pci 0000:03:00.1: reg 14: [io  0xc100-0xc103]
[    0.272395] pci 0000:03:00.1: reg 18: [io  0xc200-0xc207]
[    0.272402] pci 0000:03:00.1: reg 1c: [io  0xc300-0xc303]
[    0.272409] pci 0000:03:00.1: reg 20: [io  0xc400-0xc40f]
[    0.272462] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.272473] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    0.272476] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.272479] pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xea0fffff]
[    0.272483] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.272542] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.272561] pci 0000:04:00.0: reg 18: [mem 0xe9000000-0xe9000fff 64bit]
[    0.272579] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.272620] pci 0000:04:00.0: supports D1 D2
[    0.272621] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.272625] pci 0000:04:00.0: PME# disabled
[    0.272645] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.272653] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    0.272656] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.272659] pci 0000:00:1c.4:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.272663] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.272711] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.272714] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.272717] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.272721] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.272723] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.272725] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.272727] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.272728] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.272730] pci 0000:00:1e.0:   bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[    0.272747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.272828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.272867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.272910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.272946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.286058] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.286126] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.286193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.286259] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.286326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.286393] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.286459] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.286526] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.286564] HEST: Table is not found!
[    0.287009] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.287012] vgaarb: loaded
[    0.287038] PCI: Using ACPI for IRQ routing
[    0.287038] PCI: pci_cache_line_size set to 64 bytes
[    0.287073] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.287075] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
[    0.287089] NetLabel: Initializing
[    0.287089] NetLabel:  domain hash size = 128
[    0.287089] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.287089] NetLabel:  unlabeled traffic allowed by default
[    0.287089] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.287089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.287089] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.291011] Switching to clocksource tsc
[    0.291030] pnp: PnP ACPI init
[    0.291031] ACPI: bus type pnp registered
[    0.293683] pnp: PnP ACPI: found 14 devices
[    0.293684] ACPI: ACPI bus type pnp unregistered
[    0.293690] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.293693] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.293694] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.293697] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.293698] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.293703] system 00:0a: [io  0x0400-0x04bf] could not be reserved
[    0.293709] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.293713] system 00:0c: [mem 0x000cd000-0x000cffff] has been reserved
[    0.293715] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.293717] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.293720] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.293722] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.293724] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.293726] system 00:0c: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.293728] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.293730] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.293732] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.293734] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.293735] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.293737] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[    0.293739] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[    0.303623] pci 0000:00:1c.0: BAR 14: assigned [mem 0xea200000-0xea3fffff]
[    0.303626] pci 0000:00:1c.0: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
[    0.303628] pci 0000:00:1c.3: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
[    0.303631] pci 0000:00:1c.4: BAR 15: assigned [mem 0xea800000-0xea9fffff pref]
[    0.303633] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe701ffff pref]
[    0.303635] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.303637] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.303640] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe7ffffff]
[    0.303642] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.303645] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.303647] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.303651] pci 0000:00:1c.0:   bridge window [mem 0xea200000-0xea3fffff]
[    0.303654] pci 0000:00:1c.0:   bridge window [mem 0xea400000-0xea5fffff 64bit pref]
[    0.303658] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    0.303660] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    0.303664] pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xea0fffff]
[    0.303667] pci 0000:00:1c.3:   bridge window [mem 0xea600000-0xea7fffff 64bit pref]
[    0.303671] pci 0000:04:00.0: BAR 6: assigned [mem 0xea800000-0xea81ffff pref]
[    0.303673] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[    0.303675] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.303679] pci 0000:00:1c.4:   bridge window [mem 0xe8000000-0xe9ffffff]
[    0.303681] pci 0000:00:1c.4:   bridge window [mem 0xea800000-0xea9fffff pref]
[    0.303686] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.303688] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.303691] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.303694] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.303701]   alloc irq_desc for 16 on node -1
[    0.303703]   alloc kstat_irqs on node -1
[    0.303707] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.303709] pci 0000:00:01.0: setting latency timer to 64
[    0.303715] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.303718] pci 0000:00:1c.0: setting latency timer to 64
[    0.303723]   alloc irq_desc for 19 on node -1
[    0.303724]   alloc kstat_irqs on node -1
[    0.303726] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.303729] pci 0000:00:1c.3: setting latency timer to 64
[    0.303735] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.303738] pci 0000:00:1c.4: setting latency timer to 64
[    0.303742] pci 0000:00:1e.0: setting latency timer to 64
[    0.303745] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303746] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303749] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.303751] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.303752] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.303754] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff]
[    0.303755] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[    0.303757] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
[    0.303759] pci_bus 0000:02: resource 1 [mem 0xea200000-0xea3fffff]
[    0.303760] pci_bus 0000:02: resource 2 [mem 0xea400000-0xea5fffff 64bit pref]
[    0.303762] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.303763] pci_bus 0000:03: resource 1 [mem 0xea000000-0xea0fffff]
[    0.303765] pci_bus 0000:03: resource 2 [mem 0xea600000-0xea7fffff 64bit pref]
[    0.303767] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.303768] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[    0.303770] pci_bus 0000:04: resource 2 [mem 0xea800000-0xea9fffff pref]
[    0.303771] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    0.303773] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.303774] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.303776] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303777] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.303779] pci_bus 0000:05: resource 8 [mem 0xbff00000-0xfebfffff]
[    0.303797] NET: Registered protocol family 2
[    0.303898] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.304593] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.307156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.307582] TCP: Hash tables configured (established 524288 bind 65536)
[    0.307584] TCP reno registered
[    0.307592] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.307626] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.307743] NET: Registered protocol family 1
[    0.307923] pci 0000:01:00.0: Boot video device
[    0.307932] PCI: CLS 32 bytes, default 64
[    0.307974] Unpacking initramfs...
[    0.503368] Freeing initrd memory: 11464k freed
[    0.506559] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.506563] Placing 64MB software IO TLB between ffff880001e79000 - ffff880005e79000
[    0.506565] software IO TLB at phys 0x1e79000 - 0x5e79000
[    0.508871] audit: initializing netlink socket (disabled)
[    0.508884] type=2000 audit(1284821690.507:1): initialized
[    0.509197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.513277] VFS: Disk quotas dquot_6.5.2
[    0.513370] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.513486] msgmni has been set to 7933
[    0.513878] alg: No test for stdrng (krng)
[    0.514083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.514086] io scheduler noop registered
[    0.514088] io scheduler deadline registered
[    0.514163] io scheduler cfq registered (default)
[    0.514276] pcieport 0000:00:01.0: setting latency timer to 64
[    0.514292]   alloc irq_desc for 40 on node -1
[    0.514294]   alloc kstat_irqs on node -1
[    0.514301] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.514448] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.514470]   alloc irq_desc for 41 on node -1
[    0.514472]   alloc kstat_irqs on node -1
[    0.514476] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.514697] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.514719]   alloc irq_desc for 42 on node -1
[    0.514720]   alloc kstat_irqs on node -1
[    0.514725] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.514944] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.514967]   alloc irq_desc for 43 on node -1
[    0.514968]   alloc kstat_irqs on node -1
[    0.514973] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.515702] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005100000, using 1536k, total 1536k
[    0.515704] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.515706] vesafb: scrolling: redraw
[    0.515707] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.525678] Console: switching to colour frame buffer device 128x48
[    0.534779] fb0: VESA VGA frame buffer device
[    0.534965] ERST: Table is not found!
[    0.535284] Linux agpgart interface v0.103
[    0.535286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.535421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.535980] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.536363] Fixed MDIO Bus: probed
[    0.536506] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.536507] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.536666] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.536868] mice: PS/2 mouse device common for all mice
[    0.536936] cpuidle: using governor ladder
[    0.536937] cpuidle: using governor menu
[    0.537113] TCP cubic registered
[    0.537405] NET: Registered protocol family 10
[    0.537721] lo: Disabled Privacy Extensions
[    0.538126] registered taskstats version 1
[    0.538416] Freeing unused kernel memory: 664k freed
[    0.553771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.591488] udev: starting version 161
[    0.632035] usbcore: registered new interface driver usbfs
[    0.632059] usbcore: registered new interface driver hub
[    0.635000] usbcore: registered new device driver usb
[    0.647758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.647791]   alloc irq_desc for 18 on node -1
[    0.647792]   alloc kstat_irqs on node -1
[    0.647799] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.647831] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.647833] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.647849] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.647894] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.647916] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.647969] r8169 0000:04:00.0: setting latency timer to 64
[    0.648032]   alloc irq_desc for 44 on node -1
[    0.648034]   alloc kstat_irqs on node -1
[    0.648047] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[    0.648381] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000066a000, 00:1a:4d:56:53:78, XID 18000000 IRQ 44
[    0.650563] SCSI subsystem initialized
[    0.654043] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.654059] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea104000
[    0.663943] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.663959] libata version 3.00 loaded.
[    0.663965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.663967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.663969] usb usb1: Product: EHCI Host Controller
[    0.663970] usb usb1: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[    0.663972] usb usb1: SerialNumber: 0000:00:1a.7
[    0.664060] hub 1-0:1.0: USB hub found
[    0.664064] hub 1-0:1.0: 6 ports detected
[    0.664135]   alloc irq_desc for 23 on node -1
[    0.664137]   alloc kstat_irqs on node -1
[    0.664141] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.664164] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.664167] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.664174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.668065] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.668079] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea105000
[    0.677857] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.677874] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.677877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.677879] usb usb2: Product: EHCI Host Controller
[    0.677881] usb usb2: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 ehci_hcd
[    0.677883] usb usb2: SerialNumber: 0000:00:1d.7
[    0.677958] hub 2-0:1.0: USB hub found
[    0.677962] hub 2-0:1.0: 6 ports detected
[    0.678048] ata_piix 0000:00:1f.2: version 2.13
[    0.678072] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.678076] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.678111] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.678154] scsi0 : ata_piix
[    0.678213] scsi1 : ata_piix
[    0.678749] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.678753] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.678791] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.678795] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.678821] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.680075] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.680080] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.680101] scsi2 : ata_piix
[    0.680116] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    0.680187] scsi3 : ata_piix
[    0.680189] scsi4 : pata_jmicron
[    0.680283] scsi5 : pata_jmicron
[    0.680465] uhci_hcd: USB Universal Host Controller Interface driver
[    0.681585] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[    0.681588] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[    0.681611] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.681617] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.681619] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.681625] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.681647] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[    0.681671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.681673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.681674] usb usb3: Product: UHCI Host Controller
[    0.681676] usb usb3: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.681677] usb usb3: SerialNumber: 0000:00:1a.0
[    0.681740] hub 3-0:1.0: USB hub found
[    0.681743] hub 3-0:1.0: 2 ports detected
[    0.681833]   alloc irq_desc for 21 on node -1
[    0.681834]   alloc kstat_irqs on node -1
[    0.681837] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.681843] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.681845] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.681851] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.681876] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[    0.681899] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.681901] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.681902] usb usb4: Product: UHCI Host Controller
[    0.681904] usb usb4: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.681905] usb usb4: SerialNumber: 0000:00:1a.1
[    0.682002] hub 4-0:1.0: USB hub found
[    0.682005] hub 4-0:1.0: 2 ports detected
[    0.682017] ata5: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[    0.682020] ata6: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[    0.682079] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.682083] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.682085] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.682090] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.682109] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[    0.682133] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.682135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682137] usb usb5: Product: UHCI Host Controller
[    0.682138] usb usb5: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.682139] usb usb5: SerialNumber: 0000:00:1a.2
[    0.682192] hub 5-0:1.0: USB hub found
[    0.682195] hub 5-0:1.0: 2 ports detected
[    0.682251] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.682255] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.682257] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.682262] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.682281] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    0.682303] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.682304] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682306] usb usb6: Product: UHCI Host Controller
[    0.682307] usb usb6: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.682308] usb usb6: SerialNumber: 0000:00:1d.0
[    0.682360] hub 6-0:1.0: USB hub found
[    0.682363] hub 6-0:1.0: 2 ports detected
[    0.682414] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.682418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.682420] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.682429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.682448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[    0.682470] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.682471] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682473] usb usb7: Product: UHCI Host Controller
[    0.682474] usb usb7: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.682476] usb usb7: SerialNumber: 0000:00:1d.1
[    0.682528] hub 7-0:1.0: USB hub found
[    0.682530] hub 7-0:1.0: 2 ports detected
[    0.682580] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.682584] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.682587] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.682591] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.682609] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[    0.682631] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.682633] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682634] usb usb8: Product: UHCI Host Controller
[    0.682636] usb usb8: Manufacturer: Linux 2.6.35-4.slh.12-aptosid-amd64 uhci_hcd
[    0.682637] usb usb8: SerialNumber: 0000:00:1d.2
[    0.682688] hub 8-0:1.0: USB hub found
[    0.682691] hub 8-0:1.0: 2 ports detected
[    0.978184] usb 2-4: new high speed USB device using ehci_hcd and address 2
[    0.995770] ata4: SATA link down (SStatus 0 SControl 300)
[    1.006371] ata3: SATA link down (SStatus 0 SControl 300)
[    1.098015] usb 2-4: New USB device found, idVendor=058f, idProduct=6362
[    1.098018] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.098020] usb 2-4: Product: Mass Storage Device
[    1.098022] usb 2-4: Manufacturer: Generic
[    1.098024] usb 2-4: SerialNumber: 058F312D81B1
[    1.102517] Initializing USB Mass Storage driver...
[    1.102605] scsi6 : usb-storage 2-4:1.0
[    1.102683] usbcore: registered new interface driver usb-storage
[    1.102684] USB Mass Storage support registered.
[    1.200008] usb 2-5: new high speed USB device using ehci_hcd and address 3
[    1.314397] usb 2-5: New USB device found, idVendor=0424, idProduct=2504
[    1.314400] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.314564] hub 2-5:1.0: USB hub found
[    1.314649] hub 2-5:1.0: 4 ports detected
[    1.442056] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.442068] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.443055] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.443068] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.448198] ata1.00: HPA detected: current 156299375, native 156301488
[    1.448203] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[    1.448206] ata1.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.448615] ata1.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[    1.448618] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.452202] ata1.00: configured for UDMA/133
[    1.458509] ata1.01: configured for UDMA/133
[    1.458613] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[    1.458713] scsi 0:0:1:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    1.460337] ata2.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
[    1.460340] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.460363] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[    1.466539] ata2.00: configured for UDMA/133
[    1.473136] ata2.01: configured for UDMA/100
[    1.473517] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
[    1.474167] scsi 1:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-S223L  SB02 PQ: 0 ANSI: 5
[    1.640269] ahci 0000:03:00.0: version 3.0
[    1.640285] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.648314] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.648346] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.648352] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.648370] sd 0:0:1:0: [sdb] Write Protect is off
[    1.648373] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.648386] sd 1:0:0:0: [sdc] Write Protect is off
[    1.648388] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.648394] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.648405] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.648408] sd 0:0:0:0: [sda] Write Protect is off
[    1.648410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.648425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.648549]  sdb:
[    1.648623]  sdc:
[    1.652030] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.652032] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.652037] ahci 0000:03:00.0: setting latency timer to 64
[    1.652165] scsi7 : ahci
[    1.652230] scsi8 : ahci
[    1.652311] ata7: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000100 irq 19
[    1.652315] ata8: SATA max UDMA/133 abar m8192@0xea000000 port 0xea000180 irq 19
[    1.654437]  sdc1
[    1.659056] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.659058] Uniform CD-ROM driver Revision: 3.20
[    1.659134] sd 1:0:0:0: [sdc] Attached SCSI disk
[    1.659144] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    1.660758]  sdb1
[    1.660808]  sda: sda1 sda2 sda3 sda4
[    1.661133] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.661154] usb 8-2: new full speed USB device using uhci_hcd and address 2
[    1.661283] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.831656] usb 8-2: New USB device found, idVendor=046d, idProduct=c51a
[    1.831659] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.831662] usb 8-2: Product: USB Receiver
[    1.831664] usb 8-2: Manufacturer: Logitech
[    1.847308] usbcore: registered new interface driver hiddev
[    1.848873] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input1
[    1.848912] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    1.853742] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input2
[    1.853814] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    1.853871] usbcore: registered new interface driver usbhid
[    1.853873] usbhid: USB HID core driver
[    1.957024] ata8: SATA link down (SStatus 0 SControl 300)
[    1.957053] ata7: SATA link down (SStatus 0 SControl 300)
[    1.971328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.971356] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.971379] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.971399] sr 1:0:1:0: Attached scsi generic sg3 type 5
[    2.103796] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.104433] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.105055] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    2.105690] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.106196] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.106453] sd 6:0:0:1: Attached scsi generic sg5 type 0
[    2.106593] sd 6:0:0:2: Attached scsi generic sg6 type 0
[    2.106737] sd 6:0:0:3: Attached scsi generic sg7 type 0
[    2.110890] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    2.111725] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    2.112286] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    2.112913] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[    2.182190] device-mapper: uevent: version 1.0.3

Beni

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #4 on: 2010/09/18, 15:36:10 »
Hallo
Sorry für das chaotische obere Post. In der Vorschau sieht es gut aus, nach absenden kommt dann aber der obere Schrott. Ich muss nun leider Weg, ich werde mich danach um eine bessere Darstellung bemühen.

Gruss
Beni

Offline devil

  • Administrator
  • User
  • *****
  • Posts: 4.844
CD- DVD- Rom nicht mehr ansprechbar
« Reply #5 on: 2010/09/18, 17:32:51 »
habs mal repariert.

greetz
devil

Offline gerd

  • User
  • Posts: 147
CD- DVD- Rom nicht mehr ansprechbar
« Reply #6 on: 2010/09/18, 18:04:22 »
"mount /dev/sr0" kann ja gar nicht funktionieren, weil es kein /dev/sr0 in der fstab gibt, wie die Fehlermeldung ja auch korrekt lautet. Laut fstab müsste
mount /dev/cdrom funkionieren, allerdings auch nur, wenn es dieses Gerät im Ordner /dev auch tatsächlich gibt.
Ansonsten mal
  mount /dev/sr0 /media/cdrom
probieren (als Root natürlich) und falls das funktioniert /dev/cdrom in der fstab durch /dev/sr0 ersetzen.

Beni

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #7 on: 2010/09/19, 00:14:47 »
Hallo
@devil Danke für die Reparatur. So sieht das ganze schon viel besser aus.

@gerd
mount /dev/sr0 /media/cdrom
unter root ausgeführt hängt das Laufwerk ein. Allerdings dauert das sehr lange, so ca. 3min.
Ich habe wie von Dir vorgeschlagen den Eintrag in der fstab angepasst. Allerdings führt das zu keinem Automatischen mount. Ich habe danach einen Neustart gemacht, dies bringt aber keine Verbesserung.
Nur das mounten unter root mit dem oben genannten Befehl funktioniert.
Ach ja, ls /dev gibt
Code: [Select]
autofs           log                 sda2      tty    tty32  tty57      usbdev8.2
block            loop0               sda3      tty0   tty33  tty58      vboxdrv
bsg              lp0                 sda4      tty1   tty34  tty59      vboxnetctl
btrfs-control    MAKEDEV             sdb       tty10  tty35  tty6       vcs
bus              mapper              sdb1      tty11  tty36  tty60      vcs1
cdrom1           mcelog              sdc       tty12  tty37  tty61      vcs2
cdrw1            mem                 sdc1      tty13  tty38  tty62      vcs3
char             net                 sdd       tty14  tty39  tty63      vcs4
console          network_latency     sde       tty15  tty4   tty7       vcs5
core             network_throughput  sdf       tty16  tty40  tty8       vcs6
cpu              null                sdg       tty17  tty41  tty9       vcs7
cpu_dma_latency  nvidia0             sg0       tty18  tty42  ttyS0      vcsa
disk             nvidiactl           sg1       tty19  tty43  ttyS1      vcsa1
dvd1             parport0            sg2       tty2   tty44  ttyS2      vcsa2
dvdrw1           port                sg3       tty20  tty45  ttyS3      vcsa3
fb0              ppp                 sg4       tty21  tty46  urandom    vcsa4
fd               psaux               sg5       tty22  tty47  usb        vcsa5
full             ptmx                sg6       tty23  tty48  usbdev1.1  vcsa6
fuse             pts                 sg7       tty24  tty49  usbdev2.1  vcsa7
gpmctl           random              shm       tty25  tty5   usbdev3.1  vga_arbiter
hidraw0          rfkill              snapshot  tty26  tty50  usbdev4.1  xconsole
hidraw1          root                snd       tty27  tty51  usbdev5.1  zero
hpet             rtc                 sndstat   tty28  tty52  usbdev5.2
initctl          rtc0                sr0       tty29  tty53  usbdev5.3
input            scd0                stderr    tty3   tty54  usbdev6.1
kmsg             sda                 stdin     tty30  tty55  usbdev7.1
kvm              sda1                stdout    tty31  tty56  usbdev8.1
aus.
Besten Dank für Deine Bemühungen.

Gruss
Beni

Offline gerd

  • User
  • Posts: 147
CD- DVD- Rom nicht mehr ansprechbar
« Reply #8 on: 2010/09/19, 01:07:58 »
Das Problem wird übrigens auch hier (auf englisch besprochen, aber bisher ohne Lösung). http://aptosid.com/index.php?name=PNphpBB2&file=viewtopic&t=75
Wichtig wäre in der fstab das noauto durch ein auto zu ersetzen bzw. den Eintrag ganz zu entfernen (bzw. auszukommentieren) (wie im englisch-sprachigem Faden diskutiert). Allerdings dürfte das Problem damit nicht behoben sein.

Beni

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #9 on: 2010/09/19, 16:24:59 »
Hallo gerd
besten Dank noch für den Link. Diesen habe ich noch nicht gesehen gehabt. Ich werde das ganze in dem Fall beobachten, ich hoffe das ändert in nächster Zeit.

Gruss
Beni

Offline spacepenguin

  • User
  • Posts: 862
    • spacepenguin.de
CD- DVD- Rom nicht mehr ansprechbar
« Reply #10 on: 2010/09/19, 20:02:57 »
Das hab ich nicht erst seit dem Wechsel zu aptosid. Wenn ich es bei einem Rechner hab, hab das mit allen aktuellen Distributionen, nur mit älteren nicht. Ist von Rechner zu Rechner unterschiedlich. Wenn es einen Rechner betrifft, betrifft es alle eingebauten DVD-Laufwerke, egal ob SATA oder PATA. Bei mir besteht das Problem allerdings nur mit CDRs.
Susan | Hardware: SysProfile
Music-Profile: http://www.last.fm/de/user/spacepengu

BlueAptosid

  • Guest
CD- DVD- Rom nicht mehr ansprechbar
« Reply #11 on: 2010/09/21, 00:37:11 »
clubex schreibt im englischsprachigen Forum:

Es ist ein Fehler in KDE Gerät Anmelder https://bugs.kde.org/show_bug.cgi?id=245822  Schön zu wissen das mein System und mein CD / DVD-Laufwerk OK ist. Nun, es ist ein KDE Anmelder / Automounter Problem. Ich habe den gnome-volume-Management-und GNOME-Dateimanager Nautilus instaliert und dort nach dem Einlegen einer Daten CD / DVD öffnet Nautilus und zeigt den Inhalt der CD, platziert ein Symbol / Label in Nautilus Orte und erstellt einen Ordner in / media. So wie es unter KDE auch sein sollte.
Also müssen wir für ein Update warten. :roll:


Orginal msg:

There is a bug in kde device notifier

https://bugs.kde.org/show_bug.cgi?id=245822

Nice to know my system and my cd/dvd drive are OK.

By way of proving it's a KDE notifier/automounter problem I installed gnome-volume-management and gnome's filemanager nautilus. Inserting a data cd/dvd opened nautilus showing the contents of the cd, placed an icon/Label in nautilus's Places and created a folder in /media. all just as KDE should.

So we have to wait for a fix.