tt-usb-dvb-s3600

Started by dieres, 2011/12/15, 23:22:40

Previous topic - Next topic
Print
Go Down Pages1
User actions

dieres

2011/12/15, 23:22:40
kann mir emand erzählen, wie ich Treiber für die besagte karte von technotrend bekomme? nach lektüre von vdr-portal dachte ich die würde out of the box funktionieren - is aber nix mit.

devil

#1
2011/12/15, 23:42:49
Verrat uns doch mal die usb-id von dem Ding (lsusb -vv | grep -i techno)

greetz
devil

Lanzi

#2
2011/12/16, 00:15:42
Ohne jetzt genau zu suchen, aber findest Du den nicht auch auf http://linuxtv.org/

Ansonsten mal nen aktellen Kernel testen, der müsste eigentlich drin sein.
Oder fehlt Dich noch die Firmware? Das ist eine andere Geschichte!

dieres

#4
2011/12/16, 19:26:40
lsusb -vv | grep -i techno :

Quoteroot@aptosidbox:/home/didi# lsusb -vv | grep -i techno
Bus 003 Device 004: ID 0b48:3007 TechnoTrend AG TT-connect S2-3600
 idVendor           0x0b48 TechnoTrend AG
 iManufacturer           1 TechnoTrend

devil

#5
2011/12/16, 20:03:27
Das aktuellste scheint http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3600 zu sein.
Schau mal, ob nach Anstecken des Device dmsg eine vergleichbare Ausgabe bringt.

greetz
devil

dieres

#6
2011/12/16, 22:13:29
tail -f /var/log/messages sagt folgendes beim anstecken des Gerätes:

Code Select
Dec 16 22:04:50 siductionbox kernel: [84820.180106] usb 1-4: new high speed USB device number 10 using ehci_hcd
Dec 16 22:04:51 siductionbox kernel: [84820.759873] usb 1-4: New USB device found, idVendor=0b48, idProduct=3007
Dec 16 22:04:51 siductionbox kernel: [84820.759888] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Dec 16 22:04:51 siductionbox kernel: [84820.759899] usb 1-4: Product: TT-USB2.0
Dec 16 22:04:51 siductionbox kernel: [84820.759908] usb 1-4: Manufacturer: TechnoTrend

Sieht schwer danach aus, das kein treiber geladen wird :-(

hab das bz2 file von s2-liplianin downgeloaded, entpackt,
make all gibt folgenden Fehler:

Code Select

root@siductionbox:/home/didi/s2-liplianin-21d36d9e22f8# make all
make -C /home/didi/s2-liplianin-21d36d9e22f8/v4l all
make[1]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l'
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make[2]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
Kernel build directory is /lib/modules//build
make -C /lib/modules//build SUBDIRS=/home/didi/s2-liplianin-21d36d9e22f8/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make: Entering an unknown directory
make: *** /lib/modules//build: No such file or directory.  Stop.
make: Leaving an unknown directory
make[1]: *** [default] Fehler 2
make[1]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l'
make: *** [all] Fehler 2

nach
ln -s /lib/modules/3.1-5.towo.2-siduction-686/build /lib/modules/build

gehts dann so weit:
Code Select


oot@siductionbox:/home/didi/s2-liplianin-21d36d9e22f8# make all
make -C /home/didi/s2-liplianin-21d36d9e22f8/v4l all
make[1]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l'
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make[2]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l/firmware'
Kernel build directory is /lib/modules//build
make -C /lib/modules//build SUBDIRS=/home/didi/s2-liplianin-21d36d9e22f8/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make[2]: Entering directory `/usr/src/linux-headers-3.1-5.towo.2-siduction-686'
 CC [M]  /home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.o
/home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.c: In function 'xc2028_set_params':
/home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.c:1178:5: error: 'T_DIGITAL_TV' undeclared (first use in this function)
/home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.c:1178:5: note: each undeclared identifier is reported only once for each function it appears in
/home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.c:1179:1: warning: control reaches end of non-void function [-Wreturn-type]
make[3]: *** [/home/didi/s2-liplianin-21d36d9e22f8/v4l/tuner-xc2028.o] Fehler 1
make[2]: *** [_module_/home/didi/s2-liplianin-21d36d9e22f8/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-3.1-5.towo.2-siduction-686'
make[1]: *** [default] Fehler 2
make[1]: Leaving directory `/home/didi/s2-liplianin-21d36d9e22f8/v4l'
make: *** [all] Fehler 2


Gibt mir mal jemand nen Schubs wie ich das hinbekomme?

dieres

#8
2011/12/23, 10:56:58
Danke für den Hinweis, dann warte ich doch mal ganz entspannt ab.

dieres

#9
2011/12/27, 01:24:53
bin jetzt mit folgendem Kernel unterwegs,

Quotedidi@siduction:~$ uname -r
3.2-rc7.towo.1-siduction-amd64

aber leider noch kein Treiber für das USB Teil von TechnoTrend drin

dieres

#10
2012/01/08, 11:54:00
die tt-s3600 will immer noch nicht richtig.

uname -r:

Code Select
3.2-0.towo.3-siduction-amd64

inxi -v3 :

Code Select
System:    Host: siduction Kernel: 3.2-0.towo.3-siduction-amd64 x86_64 (64 bit, gcc: 4.6.2)
          Desktop Xfce 4.8.3 (Gtk 2.24.6) Distro: siduction 11.0.7 One Step Beyond - kde-lite - (201112131305)
Machine:   Mobo: Intel model: D945GCLF2 version: AAE46416-103 serial: AZLS9030078N
          Bios: Intel version: LF94510J.86A.0150.2009.0210.0006 date: 02/10/2009
CPU:       Dual core Intel Atom CPU 330 (-HT-MCP-) cache: 512 KB flags: (lm nx sse sse2 sse3 ssse3) bmips: 6385.24
          Clock Speeds: 1: 1596.313 MHz 2: 1596.313 MHz 3: 1596.313 MHz 4: 1596.313 MHz
Graphics:  Card: Intel 82945G/GZ Integrated Graphics Controller bus-ID: 00:02.0
          X.org: 1.11.2.902 drivers: intel (unloaded: vesa,fbdev) tty size: 237x66 Advanced Data: N/A for root
Network:   Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller
          driver: r8169 ver: 2.3LK-NAPI port: 2000 bus-ID: 01:00.0
          IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:1c:c0:bf:a5:1e
          Card-2: Techsan B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card
          driver: b2c2_flexcop_pci port: 1000 bus-ID: 04:00.0
          IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 500.1GB (86.1% used) 1: SAMSUNG_HD501LJ
Info:      Processes: 125 Uptime: 7 min Memory: 312.6/1998.8MB Runlevel: 5 Gcc sys: 4.6.2 Client: Shell inxi: 1.7.27

wenn ich nach dem booten die usb karte anstöpsle, abziehe und wieder anschließe sieht das mit tail -f /var/log/messages folgendermaßen aus:
Code Select
bei anschließen:
Jan  8 11:34:34 siduction kernel: [  156.207066] usb 1-5: new high-speed USB device number 3 using ehci_hcd
Jan  8 11:34:35 siduction kernel: [  156.785862] usb 1-5: New USB device found, idVendor=0b48, idProduct=3007
Jan  8 11:34:35 siduction kernel: [  156.785872] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  8 11:34:35 siduction kernel: [  156.785880] usb 1-5: Product: TT-USB2.0
Jan  8 11:34:35 siduction kernel: [  156.785885] usb 1-5: Manufacturer: TechnoTrend
Jan  8 11:34:35 siduction kernel: [  156.884102] IR NEC protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.891099] dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
Jan  8 11:34:35 siduction kernel: [  156.891135] pctv452e: pctv452e_power_ctrl: 1
Jan  8 11:34:35 siduction kernel: [  156.891138]
Jan  8 11:34:35 siduction kernel: [  156.892555] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan  8 11:34:35 siduction kernel: [  156.893000] DVB: registering new adapter (Technotrend TT Connect S2-3600)
Jan  8 11:34:35 siduction kernel: [  156.896701] dvb-usb: MAC address: 00:d0:5c:0b:52:7c
Jan  8 11:34:35 siduction kernel: [  156.898967] IR RC5(x) protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.912570] IR RC6 protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.930905] stb0899_attach: Attaching STB0899
Jan  8 11:34:35 siduction kernel: [  156.935561] IR JVC protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.943607] IR Sony protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.943812] DVB: registering adapter 1 frontend 0 (STB0899 Multistandard)...
Jan  8 11:34:35 siduction kernel: [  156.952180] IR MCE Keyboard/mouse protocol handler initialized
Jan  8 11:34:35 siduction kernel: [  156.955563] stb6100_attach: Attaching STB6100
Jan  8 11:34:35 siduction kernel: [  156.961395] lirc_dev: IR Remote Control driver registered, major 251
Jan  8 11:34:35 siduction kernel: [  156.964468] IR LIRC bridge handler initialized
Jan  8 11:34:35 siduction kernel: [  156.983060] Registered IR keymap rc-tt-1500
Jan  8 11:34:35 siduction kernel: [  156.983402] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc0/input7
Jan  8 11:34:35 siduction kernel: [  156.983638] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc0
Jan  8 11:34:35 siduction kernel: [  156.983652] dvb-usb: schedule remote query interval to 100 msecs.
Jan  8 11:34:35 siduction kernel: [  156.983667] pctv452e: pctv452e_power_ctrl: 0
Jan  8 11:34:35 siduction kernel: [  156.983671]
Jan  8 11:34:35 siduction kernel: [  156.983678] dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.
Jan  8 11:34:35 siduction kernel: [  156.983776] usbcore: registered new interface driver pctv452e

nach abziehen:
Jan  8 11:36:26 siduction kernel: [  268.174840] usb 1-5: USB disconnect, device number 3
Jan  8 11:36:26 siduction kernel: [  268.199827] dvb-usb: Technotrend TT Connect S2-3600 successfully deinitialized and disconnected.

nach wieder anschließen:
Jan  8 11:37:07 siduction kernel: [  309.024047] usb 1-5: new high-speed USB device number 4 using ehci_hcd
Jan  8 11:37:07 siduction kernel: [  309.596874] usb 1-5: New USB device found, idVendor=0b48, idProduct=3007
Jan  8 11:37:07 siduction kernel: [  309.596884] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  8 11:37:07 siduction kernel: [  309.596892] usb 1-5: Product: TT-USB2.0
Jan  8 11:37:07 siduction kernel: [  309.596897] usb 1-5: Manufacturer: TechnoTrend
Jan  8 11:37:07 siduction kernel: [  309.597519] dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state.
Jan  8 11:37:07 siduction kernel: [  309.597566] pctv452e: pctv452e_power_ctrl: 1
Jan  8 11:37:07 siduction kernel: [  309.597569]
Jan  8 11:37:07 siduction kernel: [  309.599064] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan  8 11:37:07 siduction kernel: [  309.599339] DVB: registering new adapter (Technotrend TT Connect S2-3600)
Jan  8 11:37:07 siduction kernel: [  309.602745] dvb-usb: MAC address: 00:d0:5c:0b:52:7c
Jan  8 11:37:07 siduction kernel: [  309.621228] stb0899_attach: Attaching STB0899
Jan  8 11:37:07 siduction kernel: [  309.621978] DVB: registering adapter 1 frontend 0 (STB0899 Multistandard)...
Jan  8 11:37:07 siduction kernel: [  309.622301] stb6100_attach: Attaching STB6100
Jan  8 11:37:07 siduction kernel: [  309.622617] Registered IR keymap rc-tt-1500
Jan  8 11:37:07 siduction kernel: [  309.622884] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc1/input8
Jan  8 11:37:07 siduction kernel: [  309.623312] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/rc/rc1
Jan  8 11:37:07 siduction kernel: [  309.623327] dvb-usb: schedule remote query interval to 100 msecs.
Jan  8 11:37:07 siduction kernel: [  309.623345] pctv452e: pctv452e_power_ctrl: 0
Jan  8 11:37:07 siduction kernel: [  309.623350]
Jan  8 11:37:07 siduction kernel: [  309.623357] dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.

das system kriegt schon mit das es das device gibt, in kaffeine wird es gefunden. Sender suchen geht auch erstaunlicherweise, obwohl die Balken für die Signalstärke beim oberen nahezu auf null stehen, beim untern auf null.


wählt man einen Sender aus, wird umgeschaltet, aber nur ein schwarzer bildschirm angezeigt.

bei einem parallel installiertem yavdr mit nachinstallierten liplianin treiber funktioniert das teil, sogar mit Fernbedienung. Ein Hardware Fehler kann man also ausschließen.

Weiß jemand etwas dazu?
Print
Go Up Pages1
User actions