Problem with a WPA2/TTLS/PAP network

[ajavibp]

Hello. I've installed siduction with xfce in a laptop and I can't connect to a WPA2/TTLS/PAP network.

Do you know any problem with this? I'm crazy searching the problem, but all seems fine.

Thank you!

[absolut]

please give us more details!

what wifi card do you have?
are you able to "see" nearby wifi networks?
does your connection attempt fail with some kind of error?

[dibl]

Right -- as absolut said.  For example:


- did you use (as root) ceni to configure the wlan?  Did it see the wireless interface?


- if you scan (with ceni, network manager, wicd, or whatever) are you able to see networks?


Tell us what is working, and where it fails.

[ajavibp]

The wifi card work well. I connect perfectly to my home wifi with Personal WPA2, but I can't connect to Enterprise WPA2. I've entered the data correctly access, of course.

So far I've only tried with network-manager.
Thank you very much.

[dibl]

This might or might not have helpful information:


http://forums.debian.net/viewtopic.php?f=10&t=106656

[ajavibp]

Thanks dibl.


I will try it when I'm at work.
Greetings!

[piper]

This is a quote from my help files inside my buffalo router running dd-wrt, don't know if it helps or not.

WPA EnterpriseWPA Enterprise uses an external RADIUS server to perform user authentication. To use WPA RADIUS, enter the IP address of the RADIUS
server, the RADIUS Port (default is 1812) and the shared secret from the
RADIUS server.

[ajavibp]

Right -- as absolut said.  For example:

- did you use (as root) ceni to configure the wlan?  Did it see the wireless interface?

- if you scan (with ceni, network manager, wicd, or whatever) are you able to see networks?

Tell us what is working, and where it fails.

I tried with ceni, it doesn't support Enterprise WPA (or I don't see it), and wicd, but I coludn't connect.
I really think it might be a bug, since I have other computers with no problems with Ubuntu and Android.
Thanks for your help

[absolut]

well, it very much depends on the WPA2-enterprise setup...

for example, eduroam connection settings are stored on my computer in /etc/NetworkManager/system-connections/eduroam ... you might want to check and compare yours to the other working computers

if you are able to share details (online instructions how to configure your wifi) and error logs (dmesg for a start), then please do.

[ajavibp]

I will try to send the data on Monday when I return to work. Thank you very much.

[ajavibp]

Hello again, here is my dmes. My laptop is an Asus 1005P with Atheros wifi (ath9K driver)

Code Select Expand


[ 1096.207102] wlan0: authenticate with 00:0a:b8:1b:6e:92
[ 1096.229192] wlan0: send auth to 00:0a:b8:1b:6e:92 (try 1/3)
[ 1096.230898] wlan0: authenticated
[ 1096.232588] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1096.233178] wlan0: associate with 00:0a:b8:1b:6e:92 (try 1/3)
[ 1096.235814] wlan0: RX AssocResp from 00:0a:b8:1b:6e:92 (capab=0x431 status=0 aid=157)
[ 1096.237195] wlan0: associated
[ 1096.237292] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1097.354157] wlan0: deauthenticated from 00:0a:b8:1b:6e:92 (Reason: 23)
[ 1097.361695] cfg80211: Calling CRDA to update world regulatory domain
[ 1097.387549] cfg80211: World regulatory domain updated:
[ 1097.387561] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1097.387572] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1097.387581] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1097.387589] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1097.387596] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1097.387603] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1097.604775] wlan0: authenticate with 00:13:c3:44:7f:b2
[ 1097.621163] wlan0: send auth to 00:13:c3:44:7f:b2 (try 1/3)
[ 1097.622847] wlan0: authenticated
[ 1097.623400] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1097.624490] wlan0: associate with 00:13:c3:44:7f:b2 (try 1/3)
[ 1097.627930] wlan0: RX AssocResp from 00:13:c3:44:7f:b2 (capab=0x431 status=0 aid=155)
[ 1097.628788] wlan0: associated
[ 1099.194532] wlan0: deauthenticated from 00:13:c3:44:7f:b2 (Reason: 23)
[ 1099.200638] cfg80211: Calling CRDA to update world regulatory domain
[ 1099.224304] cfg80211: World regulatory domain updated:
[ 1099.224314] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1099.224321] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1099.224327] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1099.224333] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1099.224339] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1099.224345] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1099.377235] wlan0: authenticate with 00:0a:b8:1b:70:b2
[ 1099.396316] wlan0: direct probe to 00:0a:b8:1b:70:b2 (try 1/3)
[ 1099.597153] wlan0: direct probe to 00:0a:b8:1b:70:b2 (try 2/3)
[ 1099.798150] wlan0: direct probe to 00:0a:b8:1b:70:b2 (try 3/3)
[ 1099.999127] wlan0: authentication with 00:0a:b8:1b:70:b2 timed out
[ 1101.136269] wlan0: authenticate with 00:0a:b8:1b:6e:92
[ 1101.155643] wlan0: send auth to 00:0a:b8:1b:6e:92 (try 1/3)
[ 1101.160098] wlan0: authenticated
[ 1101.160604] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 1101.161090] wlan0: associate with 00:0a:b8:1b:6e:92 (try 1/3)
[ 1101.165115] wlan0: RX AssocResp from 00:0a:b8:1b:6e:92 (capab=0x431 status=0 aid=158)
[ 1101.165845] wlan0: associated
[ 1120.007930] wlan0: deauthenticating from 00:0a:b8:1b:6e:92 by local choice (reason=3)
[ 1120.011674] cfg80211: Calling CRDA to update world regulatory domain
[ 1120.045530] cfg80211: World regulatory domain updated:
[ 1120.045542] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1120.045552] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1120.045561] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1120.045570] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1120.045578] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1120.045586] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)


[ajavibp]

Hello. Today I copied the configuration file of a pc where it works as absolut advised me, but again it don't connect.
Any idea? You know what logfile can help me find the bug?
Thank you for your help!

[absolut]

is there a wpa-enterprise certificate required for your wifi connection?
what settings (encryption/handshake/etc...) are to be configured?
have you verified your personal and anonymous (if any) credentials?

[ajavibp]

is there a wpa-enterprise certificate required for your wifi connection?

No, is not. I

what settings (encryption/handshake/etc...) are to be configured?

Security: WPA2
Authentication: TTLS (Tunnel TLS)
Internal Authentication: PAP
User and password

have you verified your personal and anonymous (if any) credentials?

Of course, many times before post in this forum the first time.

I have instaled Ubuntu in the desktop computer of my office and wifi network works perfect, but in my laptop with a clean intalation of Siduction, I can't make it run. I have some knowledge because I've been using linux a few years, but I'm no expert.

Thanks!

[absolut]

i did not have such issues myself, so my input on this might be rather limited....

by looking at your dmesg output, i see multiple things to search for:
1)

Code Select Expand

ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
why is this? you were trying to connect to WPA2-PSK enterprise

2)

Code Select Expand

wlan0: deauthenticated from 00:0a:b8:1b:6e:92 (Reason: 23)
what is this reason #23