New KDE software in kdenext

[hendrikL]

Great, thx, that saved my day too

here are the related bugreports,

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=800080

https://bugs.kde.org/show_bug.cgi?id=350769

[CCarpenter]

Last d-u: 30.07.2015

Did a d-u few Hours before - without any Problem with kde-next!

Nice work! Thanks a lot!

[gypsy56]

I doubt you miss any packet, this seems more like a kde bug, but do you have kde-standard or kde-full installed?
For the record shutdown works properly here.

I found the solution. The guilty program was iceweasel aurora. When I purged it and installed iceweasel from experimental the errror was away. I'm happy now. Thank you for your excellent work.

[Penyelam]

I ran a new du,  I fear it didn't finish.
Instead  the K-menu there is now the message:

Code Select Expand

Fehler beim Laden der QML-Datei: file:///usr/
share/plasma/plasmoids/
org.kde.plasma.kickoff/contents/ui/
Kickoff.qum:27:1:module
"org.kde.plasma.private.kickoff" is not installed


[CCarpenter]

I ran a new du,  I fear it didn't finish.

Did it finish - or did it not finish?

Do or do not - there is no try! (or i fear it didnt finish)

How you made the d-u?

aptitude? -> known not to work

So, assuming you have kdenext in your sources.list:


What is suposed to work out of the box:
1) dist-upgrading with apt (not aptitude) from a siduction KDE with kdenext last upgraded before July 31 2015 (date of the debian/ubuntu switch to GCC 5)
2) dist-upgrading with apt (not aptitude) a fresh new indiansummer installation following the instructions https://community.kde.org/Plasma/InstallingNext#siduction

apt -> worked for me flawlessly in runlevel 3

Code Select Expand


System:    Host: ccsbox Kernel: 4.2.3-towo.1-siduction-amd64 x86_64 (64 bit gcc: 5.2.1)
           Desktop: KDE Plasma 5.4.1 (Qt 5.4.2)
           Distro: siduction 12.2.0 Riders on the Storm - kde - (201212092131)
Machine:   Mobo: ASRock model: 990FX Extreme9 Bios: American Megatrends v: P1.70 date: 06/04/2014
CPU:       Octa core AMD FX-9590 Eight-Core (-MCP-) cache: 16384 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 75067
           clock speeds: max: 4700 MHz 1: 1400 MHz 2: 1400 MHz 3: 4700 MHz 4: 1400 MHz 5: 1400 MHz 6: 1400 MHz
           7: 1400 MHz 8: 1400 MHz
Memory:    Array-1 capacity: 32 GB devices: 4 EC: None                                                                                                                               
           Device-1: A1_DIMM0 size: 4 GB speed: 533 MHz type: DDR3 part: CMP8GX3M2A1600C9                                                                                             
           Device-2: A1_DIMM1 size: 4 GB speed: 533 MHz type: DDR3 part: CMP8GX3M2A1600C9                                                                                             
           Device-3: A1_DIMM2 size: 4 GB speed: 533 MHz type: DDR3 part: CMP12GX3M3A1600C9                                                                                           
           Device-4: A1_DIMM3 size: 4 GB speed: 533 MHz type: DDR3 part: CMP12GX3M3A1600C9

Graphics:  Card: NVIDIA GK110 [GeForce GTX 780] bus-ID: 01:00.0
           Display Server: X.Org 1.17.2 driver: nvidia Resolution: 1680x1050@59.88hz
           GLX Renderer: GeForce GTX 780/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 346.82 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GK110 HDMI Audio driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA) driver: snd_hda_intel bus-ID: 00:14.2
           Sound: Advanced Linux Sound Architecture v: k4.2.3-towo.1-siduction-amd64
Network:   Card: Intel 82583V Gigabit Network Connection driver: e1000e v: 3.2.5-k port: 9000 bus-ID: 0a:00.0
           IF: enp10s0 state: up speed: 100 Mbps duplex: full mac: 00:00:00:00:00:00
Drives:    HDD Total Size: 8757.7GB (38.2% used) ID-1: /dev/sda model: WDC_WD30EZRX size: 3000.6GB
           ID-2: /dev/sdb model: OCZ size: 256.1GB ID-3: /dev/sdc model: ST5000NM0024 size: 5001.0GB
           ID-4: /dev/sdd model: SAMSUNG_HD501LJ size: 500.1GB
           Optical: /dev/sr0 model: HL-DT-ST BD-RE  BH16NS40 rev: 1.03 dev-links: cdrom,cdrw,dvd,dvdrw
Partition: ID-1: / size: 219G used: 33G (16%) fs: ext4 dev: /dev/sdb1
           label: N/A uuid: bllaaaaaaaaaaahhhhhhhhhhhhhh
           ID-2: /home size: 4.6T used: 2.7T (62%) fs: ext4 dev: /dev/sdc1
           label: N/A uuid: bllaaaaaaaaaaahhhhhhhhhhhhhh
           ID-3: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap dev: /dev/sdb2
           label: N/A uuid: bllaaaaaaaaaaahhhhhhhhhhhhhh
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 28.5C mobo: 33.0C gpu: 0.0:27C
           Fan Speeds (in rpm): cpu: N/A fan-1: 0 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0
Info:      Processes: 235 Uptime: 4:02 Memory: 1805.8/16007.6MB Init: systemd runlevel: 5 Gcc sys: 5.2.1
           Client: Shell (bash 4.3.421) inxi: 2.2.28


[Penyelam]

@CCarpenter
that was just a suspicion because a module is missing.
During the du was nothing peculiar.
Of course I ran it in runlevel 3 with apt-get

[Penyelam]

It works 

I already tried to install plasma-desktop  one or two hours ago, but it fails.
Recently, after another du the install finished successfully.

[CCarpenter]

It works 

I already tried to install plasma-desktop  one or two hours ago, but it fails.
Recently, after another du the install finished successfully.

Nice to hear. I hope i did not offend you!

[sunrat]

D-U successful here. Booted to desktop at least, I haven't used it much yet.
siduction December last d-u in July.

Edit: This is with kdenext.
Thanks you Santa and all the dev team for wonderful work.

[drb]

New version of gimp came in so took the plunge and d-u went with no issues

[Dieter-MZ]

d-u sucessful here also. May I say a big "THANK YOU" for the great work?

[cas]

Hi Santa,
unfortunately I wasn't so lucky. Can you please have a look at:
http://forum.siduction.org/index.php?topic=5810.0

Two questions:

Did I do anything wrong, and if so what did I do wrong?
Can I do anything or is a new install necessary?

Thanks, C

[mylo]

Hi all,

my inst is a case 3 one with kdenext. I attached a file containing the d-u logs after 31 July. I think the transiition to gcc5 has started or is finalized on my box.

Before now starting the adventure called "d-u":

1) Can I downgrade packages in order to become a case 1 installation and have a flawless d-u after?

2) Or shall I just start d-u and ask for help/support here later?

What is the best way documenting the d-u while in init 3 in order to be prepared to deliver information in case of fail?

Thanks in advance!

[devil]

1 is not an option, 2 is best performed while in IRC.


greetz
devil

[mylo]

PERFECT!

Hi all,

the d-u on my box went smoothly and finished perfect. Congratulatios to the team and all who contributed!
This is worth a Caledonia Edradour 12 y old Single Malt alternatively a comparable donation.
Please tell me your choice per PM.

Thanks!